<feed xmlns='http://www.w3.org/2005/Atom'>
<title>bcm63xx/u-boot/arch/nds32/lib, branch master</title>
<subtitle>Broadcom-s U-Boot</subtitle>
<id>https://git.openwrt.org/project/bcm63xx/u-boot/atom?h=master</id>
<link rel='self' href='https://git.openwrt.org/project/bcm63xx/u-boot/atom?h=master'/>
<link rel='alternate' type='text/html' href='https://git.openwrt.org/project/bcm63xx/u-boot/'/>
<updated>2019-05-18T12:15:35Z</updated>
<entry>
<title>CONFIG_SPL_SYS_[DI]CACHE_OFF: add</title>
<updated>2019-05-18T12:15:35Z</updated>
<author>
<name>Trevor Woerner</name>
</author>
<published>2019-05-03T13:41:00Z</published>
<link rel='alternate' type='text/html' href='https://git.openwrt.org/project/bcm63xx/u-boot/commit/?id=1001502545ff0125c39232cf0e7f26d9213ab55f'/>
<id>urn:sha1:1001502545ff0125c39232cf0e7f26d9213ab55f</id>
<content type='text'>
While converting CONFIG_SYS_[DI]CACHE_OFF to Kconfig, there are instances
where these configuration items are conditional on SPL. This commit adds SPL
variants of these configuration items, uses CONFIG_IS_ENABLED(), and updates
the configurations as required.

Acked-by: Alexey Brodkin &lt;abrodkin@synopsys.com&gt;
Signed-off-by: Trevor Woerner &lt;trevor@toganlabs.com&gt;
[trini: Make the default depend on the setting for full U-Boot, update
more zynq hardware]
Signed-off-by: Tom Rini &lt;trini@konsulko.com&gt;
</content>
</entry>
<entry>
<title>CONFIG_SYS_[ID]CACHE_OFF: unify the 'any' case</title>
<updated>2019-05-18T12:15:34Z</updated>
<author>
<name>Trevor Woerner</name>
</author>
<published>2019-05-03T13:40:56Z</published>
<link rel='alternate' type='text/html' href='https://git.openwrt.org/project/bcm63xx/u-boot/commit/?id=b7b4af0e357f4cb2a1133ca8d8cec66cbd11de81'/>
<id>urn:sha1:b7b4af0e357f4cb2a1133ca8d8cec66cbd11de81</id>
<content type='text'>
According to De Morgan's Law[1]:
	!(A &amp;&amp; B) = !A || !B
	!(A || B) = !A &amp;&amp; !B

There are 5 places in the code where we find:
	#if !(defined(CONFIG_SYS_ICACHE_OFF) &amp;&amp; defined(CONFIG_SYS_DCACHE_OFF))
and 4 places in the code where we find:
	#if (!defined(CONFIG_SYS_ICACHE_OFF) || !defined(CONFIG_SYS_DCACHE_OFF))

In words, the construct:
	!defined(CONFIG_SYS_[DI]CACHE_OFF)
means:
	"is the [DI]CACHE on?"
and the construct:
	defined(CONFIG_SYS_[DI]CACHE_OFF)
means:
	"is the [DI]CACHE off?"

Therefore
	!(defined(CONFIG_SYS_ICACHE_OFF) &amp;&amp; defined(CONFIG_SYS_DCACHE_OFF))
means:
	"the opposite of 'are they both off?'"
in other words:
	"are either or both on?"
and:
	(!defined(CONFIG_SYS_ICACHE_OFF) || !defined(CONFIG_SYS_DCACHE_OFF)
means:
	"are either or both on?"

As a result, I've converted the 4 instances of '(!A || !B)' to '!(A &amp;&amp; B)' for
consistency.

[1] https://en.wikipedia.org/wiki/De_Morgan%27s_laws

Signed-off-by: Trevor Woerner &lt;trevor@toganlabs.com&gt;
</content>
</entry>
<entry>
<title>SPDX: Convert all of our single license tags to Linux Kernel style</title>
<updated>2018-05-07T13:34:12Z</updated>
<author>
<name>Tom Rini</name>
</author>
<published>2018-05-06T21:58:06Z</published>
<link rel='alternate' type='text/html' href='https://git.openwrt.org/project/bcm63xx/u-boot/commit/?id=83d290c56fab2d38cd1ab4c4cc7099559c1d5046'/>
<id>urn:sha1:83d290c56fab2d38cd1ab4c4cc7099559c1d5046</id>
<content type='text'>
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini &lt;trini@konsulko.com&gt;
</content>
</entry>
<entry>
<title>Remove unnecessary instances of DECLARE_GLOBAL_DATA_PTR</title>
<updated>2018-04-27T18:54:48Z</updated>
<author>
<name>Tom Rini</name>
</author>
<published>2018-04-18T17:50:47Z</published>
<link rel='alternate' type='text/html' href='https://git.openwrt.org/project/bcm63xx/u-boot/commit/?id=d024236e5a31a2b4b82cbcc98b31b8170fc88d28'/>
<id>urn:sha1:d024236e5a31a2b4b82cbcc98b31b8170fc88d28</id>
<content type='text'>
We have a large number of places where while we historically referenced
gd in the code we no longer do, as well as cases where the code added
that line "just in case" during development and never dropped it.

Signed-off-by: Tom Rini &lt;trini@konsulko.com&gt;
</content>
</entry>
<entry>
<title>fdt: Implement weak arch_fixup_fdt()</title>
<updated>2018-02-18T19:53:38Z</updated>
<author>
<name>Alexey Brodkin</name>
</author>
<published>2018-01-24T17:47:09Z</published>
<link rel='alternate' type='text/html' href='https://git.openwrt.org/project/bcm63xx/u-boot/commit/?id=4280342adb2d72d6242ec1ffbb723af380b31586'/>
<id>urn:sha1:4280342adb2d72d6242ec1ffbb723af380b31586</id>
<content type='text'>
Only ARM and in some configs MIPS really implement arch_fixup_fdt().
Others just use the same boilerplate which is not good by itself,
but what's worse if we try to build with disabled CONFIG_CMD_BOOTM
and enabled CONFIG_OF_LIBFDT we'll hit an unknown symbol which was
apparently implemented in arch/xxx/lib/bootm.c.

Now with weak arch_fixup_fdt() right in image-fdt.c where it is
used we get both items highlighted above fixed.

Signed-off-by: Alexey Brodkin &lt;abrodkin@synopsys.com&gt;
Cc: Daniel Schwierzeck &lt;daniel.schwierzeck@gmail.com&gt;
Cc: Simon Glass &lt;sjg@chromium.org&gt;
Cc: York Sun &lt;york.sun@nxp.com&gt;
Cc: Stefan Roese &lt;sr@denx.de&gt;
Reviewed-by: Tom Rini &lt;trini@konsulko.com&gt;
Reviewed-by: Daniel Schwierzeck &lt;daniel.schwierzeck@gmail.com&gt;
</content>
</entry>
<entry>
<title>nds32: bootm: Fix warning of struct tag_serialnr declared</title>
<updated>2017-09-21T02:30:22Z</updated>
<author>
<name>rick</name>
</author>
<published>2017-08-28T05:31:48Z</published>
<link rel='alternate' type='text/html' href='https://git.openwrt.org/project/bcm63xx/u-boot/commit/?id=19fc21fb4af34dea1150e1cfbd64f5ccfc88a2b5'/>
<id>urn:sha1:19fc21fb4af34dea1150e1cfbd64f5ccfc88a2b5</id>
<content type='text'>
move #include &lt;asm/setup.h&gt; from bootm.c to bootm.h

Signed-off-by: rick &lt;rick@andestech.com&gt;
</content>
</entry>
<entry>
<title>env: Rename getenv/_f() to env_get()</title>
<updated>2017-08-16T12:30:24Z</updated>
<author>
<name>Simon Glass</name>
</author>
<published>2017-08-03T18:22:12Z</published>
<link rel='alternate' type='text/html' href='https://git.openwrt.org/project/bcm63xx/u-boot/commit/?id=00caae6d47645e68d6e5277aceb69592b49381a6'/>
<id>urn:sha1:00caae6d47645e68d6e5277aceb69592b49381a6</id>
<content type='text'>
We are now using an env_ prefix for environment functions. Rename these
two functions for consistency. Also add function comments in common.h.

Quite a few places use getenv() in a condition context, provoking a
warning from checkpatch. These are fixed up in this patch also.

Suggested-by: Wolfgang Denk &lt;wd@denx.de&gt;
Signed-off-by: Simon Glass &lt;sjg@chromium.org&gt;
</content>
</entry>
<entry>
<title>nds32: Remove include files from common.h</title>
<updated>2017-06-05T15:02:36Z</updated>
<author>
<name>Simon Glass</name>
</author>
<published>2017-05-17T14:22:57Z</published>
<link rel='alternate' type='text/html' href='https://git.openwrt.org/project/bcm63xx/u-boot/commit/?id=3a53e99c7de155d8c5e057d9fda1939b60e18a2f'/>
<id>urn:sha1:3a53e99c7de155d8c5e057d9fda1939b60e18a2f</id>
<content type='text'>
With a few tweaks we can avoid including these files, which are only
needed by two C files.

Signed-off-by: Simon Glass &lt;sjg@chromium.org&gt;
</content>
</entry>
<entry>
<title>nds32: Support AE3XX platform.</title>
<updated>2017-05-22T06:05:46Z</updated>
<author>
<name>rick</name>
</author>
<published>2017-05-18T06:37:53Z</published>
<link rel='alternate' type='text/html' href='https://git.openwrt.org/project/bcm63xx/u-boot/commit/?id=b841b6e94662b3b21a56d6ecaab64dcdfb0d311c'/>
<id>urn:sha1:b841b6e94662b3b21a56d6ecaab64dcdfb0d311c</id>
<content type='text'>
Support Andestech AE3xx platform: serial, timer device tree flow.

Signed-off-by: rick &lt;rick@andestech.com&gt;
</content>
</entry>
<entry>
<title>nds32: Support AG101P serial DM.</title>
<updated>2017-05-22T06:05:33Z</updated>
<author>
<name>rick</name>
</author>
<published>2017-04-17T06:41:58Z</published>
<link rel='alternate' type='text/html' href='https://git.openwrt.org/project/bcm63xx/u-boot/commit/?id=86132af799d51e8e94d87dc56a071f325f369e0c'/>
<id>urn:sha1:86132af799d51e8e94d87dc56a071f325f369e0c</id>
<content type='text'>
Support AG101P serial device tree flow.

Signed-off-by: rick &lt;rick@andestech.com&gt;
</content>
</entry>
</feed>
