bcm63xx/u-boot/arch/powerpc/dts, branch masterBroadcom-s U-Boothttps://git.openwrt.org/project/bcm63xx/u-boot/atom?h=master2019-06-20T05:14:25Zt2080: dts: Added PCIe DT nodes2019-06-20T05:14:25ZHou Zhiqiang2019-04-24T15:41:07Zurn:sha1:13c5e5bd6af70199f1d6092d49453ff77d5d41bb
T2080 integrated 4 PCIe controllers, which is compatible with
the PCI Express™ Base Specification, Revision 3.0, and this
patch is to add DT node for each PCIe controller.
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
arch: powerpc: add sata node for t2080 dts2019-05-23T14:23:09ZPeng Ma2019-03-27T09:23:28Zurn:sha1:b8f653f5744b22f04510eff1cbb47abf281c2671
Signed-off-by: Peng Ma <peng.ma@nxp.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
arch: powerpc: add usb node in t2080 dts2019-05-23T14:23:08ZYinbo Zhu2019-04-11T11:02:01Zurn:sha1:c05e2b9347d3ff0012bbf9f944ed249b5c97a9f9
Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
arch: powerpc: add eSDHC node to t2080qds dts2019-05-23T08:52:33ZYinbo Zhu2019-04-11T11:01:42Zurn:sha1:2cf0eb5dfddbe4ec0310c500609dc54f583d33df
Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
mpc83xx: Add gazerbeam board2019-05-21T06:03:38ZDirk Eibach2019-03-29T09:18:19Zurn:sha1:d494cdb97e18a30214d0414376d4eacdf82224fe
The gdsys gazerbeam board is based on a Freescale MPC8308 SOC.
It boots from NOR-Flash, kernel and rootfs are stored on
SD-Card.
On board peripherals include:
- 2x 10/100 Mbit/s Ethernet (optional)
Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc>
Signed-off-by: Mario Six <mario.six@gdsys.cc>
gazerbeam: Add u-boot specific dts include file2019-05-21T06:03:38ZMario Six2019-03-29T09:18:18Zurn:sha1:d85c385332b7f9bf0491c7fc201ef6abf0b66938
Add a U-Boot specific dts file, which encapsulates the needed
modifications to the Gazerbeam Linux device tree.
Signed-off-by: Mario Six <mario.six@gdsys.cc>
gazerbeam: Import Linux DT2019-05-21T06:03:38ZMario Six2019-03-29T09:18:17Zurn:sha1:96373c1d91ab7ec4d781d5b73828abda1419ca25
Import the Linux device tree for the Gazerbeam board.
Signed-off-by: Mario Six <mario.six@gdsys.cc>
powerpc: fix arch/powerpc/dts/Makefile2019-03-22T16:15:10ZMasahiro Yamada2019-03-14T05:58:34Zurn:sha1:680207a1c59bd678c6e56473c70326b4c50a7abf
Since commit 27cb7300ffda ("Ensure device tree DTS is compiled"),
build succeeds irrespective of the correctness of Makefile.
I am going to revert that commit, so wrong code must be fixed.
CONFIG_MCR3000 is not defined anywhere. CONFIG_TARGET_MCR3000 is the
correct one.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
board: MCR3000: migrate to DM_SERIAL2018-12-03T15:44:10ZChristophe Leroy2018-11-21T08:51:51Zurn:sha1:a8b8645fa9606c8e4a57389e500a235816646397
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
board: MCR3000: use new DM watchdog2018-12-03T15:44:10ZChristophe Leroy2018-11-21T08:51:47Zurn:sha1:4c4ca6cdd5836a416fcebe0d8dea585ad4a00681
This patch switches MCR3000 board to the new DM watchdog.
The change in u-boot.lds is because MCR3000.o grows a bit
with this patch and doesn't fit anymore below env_offset on
some versions of GCC.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>