bcm63xx/u-boot/arch/sh/cpu, branch master

sh: sh3: Remove CPU support

2019-05-10T20:43:18Z

This CPU core is old, no boards using the CPU are left in mainline, it has no prospects of ever being converted to DM, drop it. Signed-off-by: Marek Vasut Cc: Chris Brandt Cc: Nobuhiro Iwamatsu Cc: Vladimir Zapolskiy Cc: Yoshihiro Shimoda

sh: sh2: Remove CPU support

2019-05-10T20:43:18Z

SPDX: Convert all of our single license tags to Linux Kernel style

2018-05-07T13:34:12Z

When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini

sh: Use -m2a-nofpu only

2018-02-21T22:42:47Z

Based on reading over the GCC manual, passing both -m2a and -m2a-nofpu are redundant, as -m2a-nofpu will provide functional code for both. As -m2a-nofpu functions with more toolchains and does what is expected, switch. Cc: Nobuhiro Iwamatsu Signed-off-by: Tom Rini

sh: Fix linking of ms7722se

2017-08-27T15:50:16Z

While it is true that we no longer have 'ppcenv' and similar sections, including env/embedded.o at all results in the text/etc sections being available for the rest of the link. This in turn is required for the setup used on ms7722se. This also, likely, needs further fine-tuning. Fixes: f40ad66fa066 ("arch/sh: don't bring common/env_embedded.o into the link") Signed-off-by: Tom Rini

arch/sh: don't bring common/env_embedded.o into the link

2017-08-25T22:40:36Z

The linker script for SuperH brings the .ppcenv and .ppcenvr section of common/env_embedded.o into the .text section. However, the .ppcenv section is only ever filled in by env_embedded.o when CONFIG_SYS_USE_PPCENV is defined, but no platforms in mainline U-Boot use this. In addition, common/env_embedded.o is not always built (when you use CONFIG_ENV_IS_NOWHERE for example), which causes the following build failure: Fixes: LD u-boot /home/thomas/sh4aeb-linux-musl/bin/sh4aeb-linux-ld.bfd: cannot find common/env_embedded.o We fix this by no longer adding the .ppcenv and .ppcenvr sections from common/env_embedded.o into the .text section. Signed-off-by: Thomas Petazzoni Signed-off-by: Nobuhiro Iwamatsu

arch/sh: allow building in big-endian mode

2017-08-25T22:38:39Z

The SuperH architecture allows to be run in either little or big endian mode. Some SuperH SoCs get the little vs. big endian decision through mode pins sampled at reset, so if big endian has been choosen by HW designers, it cannot be easily changed. Therefore, it makes sense to allow building U-Boot for SuperH in big endian mode. To allow this, the only change needed is to adjust the OUTPUT_FORMAT() in the linker script. Signed-off-by: Thomas Petazzoni

Move environment files from common/ to env/

2017-08-15T12:18:45Z

About a quarter of the files in common/ relate to the environment. It seems better to put these into their own subdirectory and remove the prefix. Signed-off-by: Simon Glass Reviewed-by: Tom Rini

sh: generate position independent code for all platforms

2016-12-03T02:32:54Z

Finally add fpic compilation option to produce relocatable code. Note that this requires to define CONFIG_NEEDS_MANUAL_RELOC for all board files, also relocation support still has some limitations (e.g. a developer should care not to overwrite the executing code or memset() with zeroes not yet relocated data on malloc init etc.), which may be fixed while switching to PIE. Due to short investigation the architecture code is not ready for PIE linking, this will require some manipulations with .dyn* sections. Signed-off-by: Vladimir Zapolskiy

sh: share the correct version of start.S among all cpus

2016-12-03T02:32:53Z

It is easy to note that SH2/SH3/SH4 start.S code is practically the same with a minor difference for SH2 where a short data header is present. To avoid unwanted code duplication and to automatically convert SH2 and SH3 platforms to generic board support move fixed SH4 start.S into arch/sh/lib/start.S and share it among all platforms. Signed-off-by: Vladimir Zapolskiy Reviewed-by: Simon Glass