bcm63xx/u-boot/arch/x86/lib/fsp, branch master

Fix spelling of available.

2019-05-09T23:52:55Z

Signed-off-by: Vagrant Cascadian

x86: Update a stale comment about ifdtool

2019-05-08T05:02:10Z

We use binman to build the x86 image now. Update a comment which still refers to ifdtool. Signed-off-by: Simon Glass Reviewed-by: Bin Meng

x86: fsp: Eliminate the reset_cpu() call

2018-07-20T01:33:22Z

In preparation for the reset driver conversion, eliminate the reset_cpu() call in the FSP init path as it's too early for the reset driver to work. Signed-off-by: Bin Meng Reviewed-by: Simon Glass

x86: Use microcode update from device tree for all processors

2018-07-02T01:23:28Z

Built without a ROM image with FSP (u-boot.rom), the U-Boot loader applies the microcode update data block encoded in Device Tree to the bootstrap processor but not passed to the other CPUs when multiprocessing is enabled. If the bootstrap processor successfully performs a microcode update from Device Tree, use the same data block for the other processors. Signed-off-by: Ivan Gorinov Reviewed-by: Bin Meng [bmeng: fixed build errors on edison and qemu-x86] Signed-off-by: Bin Meng

SPDX: Convert all of our single license tags to Linux Kernel style

2018-05-07T13:34:12Z

When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini

x86: Rename e820entry to e820_entry

2018-04-16T08:54:51Z

This changes 'struct e820entry' to 'struct e820_entry' to conform with the coding style. Signed-off-by: Bin Meng Reviewed-by: Christian Gmeiner

x86: Use 'unsigned int' in install_e820_map() functions

2018-04-16T08:54:51Z

This fixes the following checkpatch warning: warning: Prefer 'unsigned int' to bare use of 'unsigned' Signed-off-by: Bin Meng Reviewed-by: Christian Gmeiner

x86: Move commands from under arch/x86 to cmd/x86/

2018-01-08T08:52:22Z

We only need to compile and link these files when building for full U-Boot. Move them to under cmd/x86/ to make sure they aren't linked in and undiscarded due to u_boot_list_2_cmd_* being included). Cc: Bin Meng Signed-off-by: Tom Rini Reviewed-by: Bin Meng

x86: fsp: graphics: Add some notes about the graphics info hob

2017-10-27T07:13:47Z

On some platforms (eg: Braswell), the FSP will not produce the graphics info HOB unless you plug some cables to the display interface (eg: HDMI) on the board. Add such notes in the FSP video driver. Signed-off-by: Bin Meng Reviewed-by: Simon Glass

Revert "x86: fsp: Configure SPI opcode registers before SPI is locked down"

2017-10-27T07:13:47Z

This reverts commit 1e6ebee667da47fd3a87839a239a7574c66f5659. It's not appropriate to call the Intel SPI driver specific stuff in the FSP codes. We may add a simple DTS property "intel,spi-lock-down" and let the Intel SPI driver call these stuff instead. Signed-off-by: Bin Meng