bcm63xx/u-boot/board/amlogic, branch master

board: amlogic: add mailing-list to MAINTAINERS

2019-07-04T15:36:52Z

Add missing mailing-list to the amlogic boards MAINTAINERS file. Signed-off-by: Neil Armstrong

boards: amlogic-g200: remove phy reset

2019-05-31T08:04:15Z

The PHY reset is now handled by the MAC driver, remove this leftover. Signed-off-by: Neil Armstrong

board: amlogic-q200: fix Khadas VIM2 README

2019-04-23T09:19:59Z

The vendor U-boot branch and defconfig was wrong for the Khadas VIM2, fix this. Signed-off-by: Neil Armstrong

boards: meson: add g12a u200

2019-04-23T09:19:09Z

The Amlogic U200 board is based on the Amlogic S905D2 SoC from the Amlogic G12A SoC family. The board has the following specifications : - Amlogic S905D2 ARM Cortex-A53 quad-core SoC - XGB DDR4 SDRAM - 10/100 Ethernet (Internal PHY) - 1 x USB 3.0 Host - eMMC - SDcard - Infrared receiver - SDIO WiFi Module - MIPI DSI Connector - Audio HAT Connector - PCI-E M.2 Connector Signed-off-by: Jerome Brunet Signed-off-by: Neil Armstrong

boards: Amlogic: Add support for Libretech-AC

2019-04-10T14:50:46Z

LibreTech AC is a single board computer manufactured by Libre Technology with the following specifications: - Amlogic S805X ARM Cortex-A53 quad-core SoC @ 1.2GHz - ARM Mali 450 GPU - 512MiB DDR4 SDRAM - 10/100 Ethernet - HDMI 2.0 4K/60Hz display - 40-pin GPIO header - 4 x USB 2.0 Host - eMMC, SPI NOR Flash - Infrared receiver The u-boot specific code is the same as the P212 support, so use the P212 board support code with a distinct defconfig and config include files. Signed-off-by: Neil Armstrong

ARM: board: meson: add p201 board

2019-04-10T14:48:31Z

This adds support for p201 reference boards Signed-off-by: Mohammad Rasim Signed-off-by: Neil Armstrong

ARM: board: meson: add p200 board

2019-04-10T14:48:31Z

This adds the defconfig and README files for p200 board Signed-off-by: Mohammad Rasim Acked-by: Neil Armstrong Signed-off-by: Neil Armstrong

ARM: board: meson: rename odroid-c2 to p200

2019-04-10T14:48:31Z

This renames the odroid-c2 to p200 and set it as the default GXBB board Other boards (odroid-c2 and nanopi-k2) will inherit from p200 Signed-off-by: Mohammad Rasim Acked-by: Neil Armstrong Signed-off-by: Neil Armstrong

Merge tag 'u-boot-amlogic-20181126' of git://git.denx.de/u-boot-amlogic

2018-11-29T20:16:58Z

Cleanup and update towards support for Amlogic Meson AXG SoCs : - mmc: meson-gx: Add AXG compatible - net: designware: add meson meson compatibles - Amlogic Meson cleanup for AXG SoC support

ARM: meson: factorize common code out amlogic's boards

2018-11-26T13:40:52Z

Now we have moved all the Amlogic board support to common generic board code, we can move the identical board_init() and ft_board_setup() functions to weak functions into the board-common mach-meson file. Signed-off-by: Jerome Brunet Signed-off-by: Neil Armstrong