bcm63xx/u-boot/board/barco, branch master

SPDX: Convert all of our single license tags to Linux Kernel style

2018-05-07T13:34:12Z

When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini

Remove unnecessary instances of DECLARE_GLOBAL_DATA_PTR

2018-04-27T18:54:48Z

We have a large number of places where while we historically referenced gd in the code we no longer do, as well as cases where the code added that line "just in case" during development and never dropped it. Signed-off-by: Tom Rini

imx: imx6: Move gpr_init() function to soc.c

2017-08-28T07:48:53Z

Since the gpr_init() function is common for boards using MX6S, MX6DL, MX6D, MX6Q and MX6QP processors move it to the soc.c file. Signed-off-by: Breno Lima Acked-by: Stefano Babic Reviewed-by: Lukasz Majewski Reviewed-by: Fabio Estevam

imx: reorganize IMX code as other SOCs

2017-07-12T08:17:44Z

Change is consistent with other SOCs and it is in preparation for adding SOMs. SOC's related files are moved from cpu/ to mach-imx/. This change is also coherent with the structure in kernel. Signed-off-by: Stefano Babic CC: Fabio Estevam CC: Akshay Bhat CC: Ken Lin CC: Marek Vasut CC: Heiko Schocher CC: "Sébastien Szymanski" CC: Christian Gmeiner CC: Stefan Roese CC: Patrick Bruenn CC: Troy Kisky CC: Nikita Kiryanov CC: Otavio Salvador CC: "Eric Bénard" CC: Jagan Teki CC: Ye Li CC: Peng Fan CC: Adrian Alonso CC: Alison Wang CC: Tim Harvey CC: Martin Donnelly CC: Marcin Niestroj CC: Lukasz Majewski CC: Adam Ford CC: "Albert ARIBAUD (3ADEV)" CC: Boris Brezillon CC: Soeren Moch CC: Richard Hu CC: Wig Cheng CC: Vanessa Maegima CC: Max Krummenacher CC: Stefan Agner CC: Markus Niebel CC: Breno Lima CC: Francesco Montefoschi CC: Jaehoon Chung CC: Scott Wood CC: Joe Hershberger CC: Anatolij Gustschin CC: Simon Glass CC: "Andrew F. Davis" CC: "Łukasz Majewski" CC: Patrice Chotard CC: Nobuhiro Iwamatsu CC: Hans de Goede CC: Masahiro Yamada CC: Stephen Warren CC: Andre Przywara CC: "Álvaro Fernández Rojas" CC: York Sun CC: Xiaoliang Yang CC: Chen-Yu Tsai CC: George McCollister CC: Sven Ebenfeld CC: Filip Brozovic CC: Petr Kulhavy CC: Eric Nelson CC: Bai Ping CC: Anson Huang CC: Sanchayan Maity CC: Lokesh Vutla CC: Patrick Delaunay CC: Gary Bisson CC: Alexander Graf CC: u-boot@lists.denx.de Reviewed-by: Fabio Estevam Reviewed-by: Christian Gmeiner

imx: s/docs\/README.imximage/doc\/README.imximage/g

2016-10-26T14:53:16Z

Fixed typo for doc/README.imximage on respective imximage.cfg files. Cc: Tom Rini Cc: Stefano Babic Cc: Fabio Estevam Acked-by: Peng Fan Signed-off-by: Jagan Teki

mx6: ddr: Allow changing REFSEL and REFR fields

2016-09-06T16:22:48Z

Currently MX6 SPL DDR initialization hardcodes the REF_SEL and REFR fields of the MDREF register as 1 and 7, respectively for DDR3 and 0 and 3 for LPDDR2. Looking at the MDREF initialization done via DCD we see that boards do need to initialize these fields differently: $ git grep 0x021b0020 board/ board/bachmann/ot1200/mx6q_4x_mt41j128.cfg:DATA 4 0x021b0020 0x00005800 board/ccv/xpress/imximage.cfg:DATA 4 0x021b0020 0x00000800 /* MMDC0_MDREF */ board/freescale/mx6qarm2/imximage.cfg:DATA 4 0x021b0020 0x7800 board/freescale/mx6qarm2/imximage.cfg:DATA 4 0x021b0020 0x00005800 board/freescale/mx6qarm2/imximage_mx6dl.cfg:DATA 4 0x021b0020 0x00005800 board/freescale/mx6qarm2/imximage_mx6dl.cfg:DATA 4 0x021b0020 0x00005800 board/freescale/mx6qsabreauto/imximage.cfg:DATA 4 0x021b0020 0x00005800 board/freescale/mx6qsabreauto/mx6dl.cfg:DATA 4 0x021b0020 0x00005800 board/freescale/mx6qsabreauto/mx6qp.cfg:DATA 4 0x021b0020 0x00005800 board/freescale/mx6sabresd/mx6dlsabresd.cfg:DATA 4 0x021b0020 0x00005800 board/freescale/mx6sabresd/mx6q_4x_mt41j128.cfg:DATA 4 0x021b0020 0x00005800 board/freescale/mx6slevk/imximage.cfg:DATA 4 0x021b0020 0x00001800 board/freescale/mx6sxsabreauto/imximage.cfg:DATA 4 0x021b0020 0x00000800 board/freescale/mx6sxsabresd/imximage.cfg:DATA 4 0x021b0020 0x00000800 board/warp/imximage.cfg:DATA 4 0x021b0020 0x00001800 So introduce a mechanism for users to be able to configure REFSEL and REFR fields as needed. Keep all the mx6 SPL users in their current REF_SEL and REFR values, so no functional changes for the existing users. Signed-off-by: Fabio Estevam Reviewed-by: Eric Nelson

mx6: remove SYS_SOC from board Kconfig

2015-09-13T08:37:29Z

Remove duplicated SYS_SOC Kconfig entry from board Kconfig, because we have this entry in arch/arm/cpu/armv7/mx6/Kconfig. Signed-off-by: Peng Fan Cc: Stefano Babic Cc: Heiko Schocher Cc: Christian Gmeiner Cc: Stefan Roese Cc: Troy Kisky Cc: Nikita Kiryanov Cc: "Eric Bénard" Cc: Fabio Estevam Cc: Tim Harvey Cc: Marek Vasut Cc: Markus Niebel Cc: Otavio Salvador Acked-by: Stefan Roese Acked-by: Marek Vasut Acked-by: Christian Gmeiner Acked-by: Markus Niebel Acked-by: Troy Kisky Acked-by: Igor Grinberg

imx: mx6: ddr init MMDC according to ddr_type

2015-09-02T13:34:12Z

To i.MX6, DDR3 and LPDDR2 is supported, so rename function mx6_dram_cfg to mx6_ddr3_cfg and the original mx6_dram_cfg function only is a wrapper. The new reimplemented function mx6_dram_cfg only invokes mx6_ddr3_cfg when ddr_type is for DDR3. Later we can use ddr_type to initialize MMDC for LPDDR2. Initialize ddr_type for different boards which enable SPL. Signed-off-by: Peng Fan Cc: Stefano Babic Cc: Tim Harvey Cc: Stefan Roese Cc: Fabio Estevam Reviewed-by: Stefan Roese

imx: clock support enet2 anatop clock support

2015-09-02T13:29:14Z

To i.MX6SX/UL, two ethernet interfaces are supported. Add ENET2 clock support: 1. Introduce a new input parameter "fec_id", only 0 and 1 are allowed. To value 1, only i.MX6SX/UL can pass the check. 2. Modify board code who use this api to follow new api prototype. Signed-off-by: Peng Fan Cc: Heiko Schocher Cc: Fabio Estevam Cc: Stefan Roese Cc: Nikolaos Pasaloukos Cc: Stefano Babic Reviewed-by: Stefan Roese

mx6: fix warning in platinum board

2015-01-22T09:59:03Z

Fix warning due to missing prototype for writel Signed-off-by: Stefano Babic Acked-by: Stefan Roese