bcm63xx/u-boot/board/freescale/common/Makefile, branch masterBroadcom-s U-Boothttps://git.openwrt.org/project/bcm63xx/u-boot/atom?h=master2019-02-19T04:56:43Zarmv8: emc2305: add support for fan controller2019-02-19T04:56:43ZMeenakshi Aggarwal2018-11-30T17:02:11Zurn:sha1:e088e587eda7a8813c977ddee84207ca728f87c5
Add support for fan controller emc2305.
Signed-off-by: Sriram Dash <sriram.dash@nxp.com>
Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com>
Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
SPDX: Convert all of our single license tags to Linux Kernel style2018-05-07T13:34:12ZTom Rini2018-05-06T21:58:06Zurn:sha1:83d290c56fab2d38cd1ab4c4cc7099559c1d5046
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from. So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry. Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.
In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.
This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents. There's also a few places where I found we did not have a tag
and have introduced one.
Signed-off-by: Tom Rini <trini@konsulko.com>
common: board_f: vid: Add VID specific API to adjust core voltage2018-01-23T19:20:46ZRajesh Bhagat2018-01-17T10:43:08Zurn:sha1:1fab98fb90b0350210ac6938cb61647c66dcf0f7
Adds a VID specific API in init_sequence_f and spl code flow
namely init_func_vid which is required to adjust core voltage.
VID specific code is required in spl, hence moving flag CONFIG_VID
out of spl flags.
Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com>
Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
board: freescale: common: add pfuze dm code2018-01-12T13:28:04ZPeng Fan2018-01-02T01:32:06Zurn:sha1:f8e450a7f61a04967d3fa74817b3abc9ec95aecd
Add pfuze dm code, this code could be enabled with CONFIG_DM_PMIC_PFUZE100.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
pmic: pmic_mc34vr500: Add APIs to set/get SWx volt2017-01-18T17:28:57ZHou Zhiqiang2016-12-09T08:08:58Zurn:sha1:4394ad1227e5752b13fefa99846cb7073f4dd42b
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
Reviewed-by: York Sun <york.sun@nxp.com>
powerpc: P5040DS: Remove macro CONFIG_P5040DS2016-11-24T07:42:11ZYork Sun2016-11-18T19:40:51Zurn:sha1:161b472482626703f13033e6859a0dd00fe2bcae
Use CONFIG_TARGET_P5040DS instead.
Signed-off-by: York Sun <york.sun@nxp.com>
powerpc: P5020DS: Remove macro CONFIG_P5020DS2016-11-24T07:42:11ZYork Sun2016-11-18T19:32:46Zurn:sha1:3b83649d53896cf115788130799d9ff585867e4a
Use CONFIG_TARGET_P5020DS instead.
Signed-off-by: York Sun <york.sun@nxp.com>
powerpc: P4080DS: Remove macro CONFIG_P4080DS2016-11-24T07:42:11ZYork Sun2016-11-18T19:26:09Zurn:sha1:529fb062081e100faae6dc0d163a548b8528ff24
Use CONFIG_TARGET_P4080DS instead.
Signed-off-by: York Sun <york.sun@nxp.com>
powerpc: P3041DS: Remove macro CONFIG_P3041DS2016-11-24T07:42:11ZYork Sun2016-11-18T19:22:17Zurn:sha1:850af2c7a9eb0bb11135eaba3c3f85aba64581f0
Use CONFIG_TARGET_P3041DS instead.
Signed-off-by: York Sun <york.sun@nxp.com>
powerpc: P2041RDB: Remove macro CONFIG_P2041RDB2016-11-24T07:42:10ZYork Sun2016-11-18T19:17:22Zurn:sha1:37107facbc3d1c57414ae23a807a073b360ce232
Use CONFIG_TARGET_P2041RDB instead.
Signed-off-by: York Sun <york.sun@nxp.com>