bcm63xx/u-boot/board/freescale/common, branch master

board/freescale/common: secure_boot: Set bootdelay to -2.

2019-06-19T07:24:57Z

Uboot prompt must not be available while running secure boot. TO ensure this bootdelay must be set to -2. Signed-off-by: Udit Agarwal Reviewed-by: Prabhakar Kushwaha

MPC832XEMDS: Migrate to CONFIG_TARGET_MPC832XEMDS

2019-05-21T05:51:40Z

Use the proper CONFIG_TARGET_MPC832XEMDS Kconfig option to replace the CONFIG_MPC832XEMDS ad-hoc config option. Signed-off-by: Mario Six

armv8: emc2305: add support for fan controller

2019-02-19T04:56:43Z

Add support for fan controller emc2305. Signed-off-by: Sriram Dash Signed-off-by: Meenakshi Aggarwal Signed-off-by: Prabhakar Kushwaha

armv8: lx2160ardb : Add support for LX2160ARDB platform

2019-02-19T04:56:43Z

LX2160ARDB is an evaluation board that supports LX2160A family SoCs. This patch add base support for this board. Signed-off-by: Wasim Khan Signed-off-by: Yogesh Gaur Signed-off-by: Meenakshi Aggarwal Signed-off-by: Vabhav Sharma Signed-off-by: Sriram Dash Signed-off-by: Rajesh Bhagat Signed-off-by: Pankit Garg Signed-off-by: Yinbo Zhu Signed-off-by: Peng Ma Signed-off-by: Chuanhua Han Signed-off-by: Priyanka Jain [PK: Sqaush patches from Yinbo Zhu, Peng Ma, Chuanhua Han and re-arrange defconfig] Signed-off-by: Prabhakar Kushwaha

board/freescale/vid: Add vdd table for NXP LX2160A SoC

2018-12-06T22:37:19Z

Signed-off-by: Priyanka Jain Reviewed-by: York Sun

board/freescale/vid: Add correction for ltc3882 read error.

2018-12-06T22:37:19Z

Voltage regulator LTC3882 device has 0.5% voltage read error. So for NXP SoC devices this generally equates to 2mV Update set_voltage_to_LTC for below: 1.Add coorection of upto 2mV in voltage comparison to take care of voltage read error of voltage regulator 2.Add loop max count kept as 100 to avoid infinte loop. Signed-off-by: Priyanka Jain Reviewed-by: York Sun

armv8: layerscape: move ns_dev[] define from h to c file.

2018-08-10T17:36:03Z

Move ns_dev[] from header file to C file to avoid compiling warning when header file is included by others. Signed-off-by: Ran Wang [YS: rewrite commit message] Reviewed-by: York Sun

board/freescale,lsch3: Add entry for 0.9v

2018-06-08T23:43:11Z

As per updated hardware documentation for lsch3 based chips like LS2088A, 0.9v support has been added in possible supported SoC volatges Signed-off-by: Priyanka Jain Reviewed-by: York Sun

SPDX: Convert all of our single license tags to Linux Kernel style

2018-05-07T13:34:12Z

When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini

Remove unnecessary instances of DECLARE_GLOBAL_DATA_PTR

2018-04-27T18:54:48Z

We have a large number of places where while we historically referenced gd in the code we no longer do, as well as cases where the code added that line "just in case" during development and never dropped it. Signed-off-by: Tom Rini