bcm63xx/u-boot/board/freescale/mpc8572ds/tlb.c, branch master

SPDX: Convert all of our single license tags to Linux Kernel style

2018-05-07T13:34:12Z

When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini

Add GPL-2.0+ SPDX-License-Identifier to source files

2013-07-24T13:44:38Z

Signed-off-by: Wolfgang Denk [trini: Fixup common/cmd_io.c] Signed-off-by: Tom Rini

powerpc/85xx: Fix MPC8572DS NAND build

2011-11-08T17:03:54Z

Reduce NAND SPL build size by not include TLB entries that arent used by it. Signed-off-by: Kumar Gala

powerpc/85xx: Add support for booting from NAND on MPC8572DS

2011-01-14T07:32:18Z

Mimic support that exists on MPC8536DS on the MPC8572DS to allow booting from NAND. Signed-off-by: Jin Qing Signed-off-by: Kumar Gala

ppc/85xx: Map boot page guarded for MP boot

2010-01-05T19:49:09Z

We already map the page cache-inhibited. There is no reason we shouldn't also be marking it guarded to prevent speculative accesses. Signed-off-by: Kumar Gala

85xx: Introduce CONFIG_SYS_PCI*_IO_VIRT for FSL boards

2009-01-23T23:03:13Z

Introduce a new define to seperate out the virtual address that PCI IO space is at from the physical address. In most situations these are mapped 1:1. However any code accessing the bus should use VIRT. Signed-off-by: Kumar Gala Acked-by: Andy Fleming

85xx: Introduce CONFIG_SYS_PCI*_MEM_VIRT for FSL boards

2009-01-23T23:03:13Z

Introduce a new define to seperate out the virtual address that PCI memory is at from the physical address. In most situations these are mapped 1:1. However any code accessing the bus should use VIRT. Signed-off-by: Kumar Gala Acked-by: Andy Fleming

85xx: separate FLASH BASE virtual from physical address

2009-01-23T23:03:13Z

Added a CONFIG_SYS_FLASH_BASE_PHYS for use as the physical address and maintain CONFIG_SYS_FLASH_BASE as the virtual address of the flash. This allows us to deal with 36-bit phys on these boards in the future. Signed-off-by: Kumar Gala Acked-by: Andy Fleming

85xx: separate PIXIS virtual from physical address

2009-01-23T23:03:13Z

Added a PIXIS_BASE_PHYS for use as the physical address and maintain PIXIS_BASE as the virtual address of the PIXIS fpga registers. This allows us to deal with 36-bit phys on these boards in the future. Signed-off-by: Kumar Gala Acked-by: Andy Fleming

Some changes of TLB entry setting for MPC8572DS

2009-01-13T22:58:46Z

- Move the TLB entry of PIXIS_BASE from TLB0 to TLB1[8], because in CAMP mode, all the TLB0 entries will be invalidated after cpu1 brings up kernel, thus cpu0 can not access PIXIS_BASE anymore (any access will cause DataTLBError exception) - Set CONFIG_SYS_DDR_TLB_START to 9 for MPC8572DS board. Signed-off-by: Haiying Wang