bcm63xx/u-boot/board/freescale/mx6sabreauto, branch master

mx6sabreauto: README: Adjust the binary name after DM conversion

2019-03-13T08:14:35Z

After the conversion to DM the U-Boot binary is called u-boot-dtb.imx, so fix the README file accordingly. Signed-off-by: Fabio Estevam Acked-by: Peng Fan

board: mx6sabreauto: Remove the non-DM code

2019-02-15T21:01:15Z

Since the mx6sabreauto has DM support, remove the unused non-DM code from mx6sabreauto board file. Signed-off-by: Abel Vesa Reviewed-by: Fabio Estevam

mx6sabreauto: Add DM_GPIO support

2019-02-15T21:01:15Z

Add the DM_GPIO related config for mx6sabreauto. Also add the gpio request calls. Signed-off-by: Abel Vesa Reviewed-by: Peng Fan Reviewed-by: Fabio Estevam

board: mx6sabreauto: Add board_fit_config_name_match to support FIT in SPL

2019-02-15T21:01:15Z

This matches one of the following three boards (or fails): - imx6q-sabreauto - imx6qp-sabreauto - imx6dl-sabreauto Signed-off-by: Abel Vesa Reviewed-by: Peng Fan Reviewed-by: Fabio Estevam Reviewed-by: Lukasz Majewski

SPDX: Convert all of our single license tags to Linux Kernel style

2018-05-07T13:34:12Z

When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini

libfdt: move headers to and

2018-03-05T15:16:28Z

Thomas reported U-Boot failed to build host tools if libfdt-devel package is installed because tools include libfdt headers from /usr/include/ instead of using internal ones. This commit moves the header code: include/libfdt.h -> include/linux/libfdt.h include/libfdt_env.h -> include/linux/libfdt_env.h and replaces include directives: #include -> #include #include -> #include Reported-by: Thomas Petazzoni Signed-off-by: Masahiro Yamada

imx: Add a common way for detecting NXP boards revision

2017-12-29T10:18:59Z

NXP development boards based on i.MX6/i.MX7 contain the board revision information stored in the fuses. Introduce a common function that can be shared by different boards and convert mx6sabreauto to use this new mechanism. Signed-off-by: Fabio Estevam

imx: Include header file

2017-10-12T15:31:16Z

When building with W=1 errors like the one below is seen: board/freescale/mx6sabresd/mx6sabresd.c:546:5: warning: no previous prototype for ‘overwrite_console’ [-Wmissing-prototypes] int overwrite_console(void) Fix the build warnings by including . Signed-off-by: Diego Dorta Reviewed-by: Fabio Estevam

imx: imx6: Move gpr_init() function to soc.c

2017-08-28T07:48:53Z

Since the gpr_init() function is common for boards using MX6S, MX6DL, MX6D, MX6Q and MX6QP processors move it to the soc.c file. Signed-off-by: Breno Lima Acked-by: Stefano Babic Reviewed-by: Lukasz Majewski Reviewed-by: Fabio Estevam

Merge git://www.denx.de/git/u-boot-imx

2017-08-16T22:12:00Z

Update pfla02 for setenv changes and PHYLIB/etc migration to Kconfig. Signed-off-by: Tom Rini