bcm63xx/u-boot/board/freescale, branch master

Merge https://gitlab.denx.de/u-boot/custodians/u-boot-mpc85xx

2019-06-20T13:14:35Z

- PCIe driver change to support DM model - T2080QDS migrated to use PCIe DM model

powerpc: T208xQDS: Compile the legacy PCIe routines conditionally

2019-06-20T05:14:10Z

Compile the legacy PCIe initialization reoutines only when DM_PCI is not enabled. Signed-off-by: Hou Zhiqiang Reviewed-by: Simon Glass Reviewed-by: Prabhakar Kushwaha

board/freescale/common: secure_boot: Set bootdelay to -2.

2019-06-19T07:24:57Z

Uboot prompt must not be available while running secure boot. TO ensure this bootdelay must be set to -2. Signed-off-by: Udit Agarwal Reviewed-by: Prabhakar Kushwaha

armv8: ls1046afrwy: Add support for LS1046AFRWY platform

2019-06-19T07:24:57Z

LS1046AFRWY board supports LS1046A family SoCs. This patch add base support for this board. Board support's 4GB ddr memory, i2c, micro-click module,microSD card, serial console,qspi nor flash,ifc nand flash,qsgmii network interface, usb 3.0 and serdes interface to support two x1gen3 pcie interface. Signed-off-by: Camelia Groza Signed-off-by: Madalin Bucur Signed-off-by: Pankit Garg Signed-off-by: Pramod Kumar Signed-off-by: Rajesh Bhagat Signed-off-by: Vabhav Sharma Reviewed-by: Prabhakar Kushwaha

armv8: ls1028a: Add secure boot defconfig

2019-06-19T07:24:57Z

Add secure boot defconfig for ls1028aqds and ls1028ardb boards. Signed-off-by: Yuantian Tang Reviewed-by: Prabhakar Kushwaha

board: lx2160a: fix fsl-mc status in fdt with bootefi

2019-06-19T07:24:57Z

fsl-mc lazyapply command applies dpl from efi_exit_boot_services(). Status of fsl-mc node in working fdt is updated at this stage. However, an efi application like grub may already have copied the fdt. So the updates to fdt done at efi_exit_boot_services() may not be visible to the OS. Fix it by updating fdt earlier if fsl-mc lazyapply command is used. Signed-off-by: Mian Yousaf Kaukab Reviewed-by: Prabhakar Kushwaha

board/fsl/layerscape: Modify the aliases names

2019-06-19T07:24:56Z

when compiling dts file using DTC_FLAG='-@', the device tree compiler reports these warnings: Warning (alias_paths): /aliases: aliases property name must include only lowercase and '-' Fixed the node aliases to silence these warnings. Signed-off-by: Pankaj Bansal Reviewed-by: Prabhakar Kushwaha

imx8mq_evk: Staticize when appropriate

2019-06-11T08:43:00Z

Staticize 'spl_dram_init' and 'i2c_pad_info1' to fix the following sparse warnings: board/freescale/imx8mq_evk/spl.c:30:6: warning: symbol 'spl_dram_init' was not declared. Should it be static? board/freescale/imx8mq_evk/spl.c:41:22: warning: symbol 'i2c_pad_info1' was not declared. Should it be static? Signed-off-by: Fabio Estevam Reviewed-by: Peng Fan

mx6sabresd: Remove U-Boot proper mmc initialization

2019-06-11T08:42:48Z

After the conversion to DM there is no need to have mmc initialization code inside U-Boot proper. Remove the unneeded code. Signed-off-by: Fabio Estevam

board: fsl: lx2160ardb: invert AQR107 pins polarity

2019-05-22T06:54:24Z

AQR107 PHYs interrupt pins are active-low, while the GIC expects a level-high signal. Signed-off-by: Florin Chiculita Reviewed-by: Prabhakar Kushwaha