bcm63xx/u-boot/board/gardena, branch master

arm: at91: Add gardena-gateway-at91sam support

2019-04-09T06:28:50Z

The GARDENA smart Gateway boards are equipped with an Atmel / Microchip AT91SAM9G25 SoC and with 128 MiB of RAM and 256 MiB of NAND storage. This patch adds support for this board including SPL support. Therefore the AT91Boostrap is not needed on this platform any more. Signed-off-by: Stefan Roese Cc: Heiko Schocher Cc: Andreas Bießmann Cc: Eugen Hristev Reviewed-by: Heiko Schocher

mips: mt76xx: gardena-smart-gateway: Add factory data variable handling

2018-11-30T16:21:44Z

Some factory data is stored in the SPI NOR and needs to get extracted from there into U-Boot environment variables. This patch also includes a board-specific command "fd_write" to provide some dummy / default values for this factory-data in the SPI NOR flash. This should only be necessary for testing purposes though. Signed-off-by: Stefan Roese Cc: Daniel Schwierzeck

mips: mt76xx: gardena-smart-gateway: Add board_late_init() to set LED def state

2018-11-18T15:02:23Z

This is needed to set the LEDs automatically to a default state, as configured in the dts. Signed-off-by: Stefan Roese Cc: Daniel Schwierzeck

mips: mt76xx: gardena-smart-gateway: Configure GPIOs (digital vs analog)

2018-11-18T15:02:23Z

Configure digital vs analog GPIOs as needed on this board. Signed-off-by: Stefan Roese Cc: Daniel Schwierzeck

mips: Add Gardena Smart-Gateway board support

2018-09-23T12:27:51Z

The Gardena Smart-Gateway boards have a MT7688 SoC with 128 MiB of RAM and 8 MiB of flash (SPI NOR) and additional 128MiB SPI NAND storage. This patch also includes 2 targets. One is the target that can be programmed into the SPI NOR flash and a 2nd target "xxx-ram" is added to support loading and booting via an already running U-Boot version. This allows easy development and testing without the need to flash the image each time. Signed-off-by: Stefan Roese [fixed and regenerated defconfig files] Signed-off-by: Daniel Schwierzeck