bcm63xx/u-boot/board/gateworks, branch masterBroadcom-s U-Boothttps://git.openwrt.org/project/bcm63xx/u-boot/atom?h=master2019-03-13T08:14:35Zimx: ventana: added support for 16bit 8Gb density (1GiB) DRAM2019-03-13T08:14:35ZTim Harvey2019-02-21T16:51:16Zurn:sha1:0ab327a7167231618d08be4621c0030c79397f00
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
imx: ventana: hexdump invalid EEPROM data2019-03-13T08:14:35ZTim Harvey2019-02-21T16:48:48Zurn:sha1:74389c13874f5fbc717beb995bfdaba87613a31c
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
imx: ventana: fix usage of dt paths with leading 0s (Linux 4.15+)2019-02-15T21:01:15ZTim Harvey2019-02-04T21:11:00Zurn:sha1:1d23f7b1ae0d54450596df92acef86b02a14326d
device-tree paths should never be used that reference node addresses
making an assumption about leading zeros. They should not be there per
the device-tree specification however they have been there until Linux
4.15 when they were removed via kernel commit
8dccafaa281aa1d240a58bbcdff338aec114a021.
This fixes various issues which will occur when using Linux 4.15+
that are being fixed up on a per model per PCB revision basis such as:
- enabling MMC UHS-I on board revisions that support it
- enabling PWM based on hwconfig
- fixing PCIe reset on GW552x
- removing cpu external watchdog reset on boards that do not support it
- populate PCI dt nodes based on PCI scan in order to fix GW16082
interrupt mapping and inject MAC address for PCI based GbE
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
imx: ventana: gw5904/gw5909: disable RS4852019-02-15T21:01:15ZTim Harvey2019-02-04T21:10:59Zurn:sha1:ad2efa3a289266866e62f984dbd93f0231116cdf
The GW5904/GW5909 have a SP33E multi-protocol serial transceiver which we
want to configure to RS232 by default (by de-asserting RS485_EN)
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
imx: ventana: add support for GW5901/GW59022019-02-15T21:01:15ZTim Harvey2019-02-04T21:10:58Zurn:sha1:9cdb1c6e995c53afeb01fdb6d529d60f725fb1f2
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
imx: ventana: add support for GW59092019-02-15T21:01:15ZTim Harvey2019-02-04T21:10:57Zurn:sha1:2285094ea91f361abdfc764826957ec99f1c6f23
The GW5909 is a small single board computer based on the i.MX6DL SoC
with the same peripheral set as the GW5904 but with half the DRAM loaded
and an additional RS232 transceiver off UART2.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
imx: ventana: add support for GW59082019-02-15T21:01:15ZTim Harvey2019-02-04T21:10:56Zurn:sha1:ebe07ef754937ea57c828fea32b1b42b9e797882
The GW5908 is a small single board computer based on the i.MX6DL SoC
with the same peripheral set as the GW530x but with 1GiB density DRAM
(64bit 512MiB).
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
imx: ventana: add support for GW59072019-02-15T21:01:15ZTim Harvey2019-02-04T21:10:55Zurn:sha1:00606b51cca6057b4df2b52c3572f476307257eb
The GW5907 is a small single board computer based on the i.MX6DL SoC
with the following peripheral set:
- DDR3 memory (512MB default)
- 1x GigE (i.MX6 FEC)
- Gateworks System Controller
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
imx: ventana: add support for GW59062019-02-15T21:01:15ZTim Harvey2019-02-04T21:10:54Zurn:sha1:988916ad1bf1e9fc98c848088d364dd8c3827f03
The GW5906 is a GW552x with mechanical and power supply connector
differences.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
imx: ventana: add i2c detect for all LVDS displays2019-02-15T21:01:15ZTim Harvey2019-02-04T21:10:53Zurn:sha1:64bdd120a00d44de2e65294774a5bae06c783f8c
Signed-off-by: Tim Harvey <tharvey@gateworks.com>