bcm63xx/u-boot/board/intel/crownbay, branch master

SPDX: Convert all of our single license tags to Linux Kernel style

2018-05-07T13:34:12Z

When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini

x86: kconfig: Let board select SPI flash

2017-08-01T12:17:02Z

Only a specific type of SPI flash exists on a board, having board Kconfig to select the SPI flash seems to make more sense. Other flash types are not necessary except coreboot, which implies all available flash drivers there. Signed-off-by: Bin Meng Reviewed-by: Simon Glass

x86: kconfig: Let board select BOARD_EARLY_INIT_F

2017-08-01T12:17:02Z

CONFIG_BOARD_EARLY_INIT_F literally indicates board-specific codes and should be not 'default y' for all x86 boards. Signed-off-by: Bin Meng Reviewed-by: Andy Shevchenko Reviewed-by: Simon Glass

x86: Drop all the old pin configuration code

2016-03-17T02:27:25Z

We don't need this anymore - we can use device tree and the new pinconfig driver instead. Signed-off-by: Simon Glass Reviewed-by: Bin Meng

x86: crownbay: Convert to use CONFIG_DM_ETH for E1000

2015-09-09T13:48:03Z

Since E1000 driver has been converted to driver model, enable it on Intel Crown Bay. But the Intel Topcliff GbE driver has not been converted to driver model yet, disable it for now. Signed-off-by: Bin Meng Acked-by: Joe Hershberger

x86: crownbay: Enable on-board SMSC superio keyboard controller

2015-08-26T14:54:16Z

So far we only enabled one legacy serial port on the SMSC LPC47m superio chipset on Intel Crown Bay board. As the board also has dual PS/2 ports routed out, enable the keyboard controller which is i8042 compatible so that we can use PS/2 keyboard and mouse. In order to make PS/2 keyboard work with the VGA console, remove CONFIG_VGA_AS_SINGLE_DEVICE. To boot Linux kernel with PIC mode using PIRQ routing table, adjust the mask in the device tree to reserve irq12 which is used by PS/2 mouse. Signed-off-by: Bin Meng Reviewed-by: Simon Glass

x86: Remove DECLARE_GLOBAL_DATA_PTR in board files

2015-06-04T08:39:38Z

gd is not referenced in those board files so DECLARE_GLOBAL_DATA_PTR should be removed. Signed-off-by: Bin Meng Acked-by: Simon Glass

x86: Kconfig: Remove deprecated CONFIG_SYS_EXTRA_OPTIONS

2015-04-30T00:51:50Z

Currently all x86 boards still use CONFIG_SYS_EXTRA_OPTIONS to define the text base address. Since it is deprecated, just remove it and use CONFIG_SYS_TEXT_BASE directly. Signed-off-by: Bin Meng Acked-by: Simon Glass

x86: Set serial port IRQ for SMSC LPC47M

2015-04-30T00:51:48Z

For starting a Linux console on the superio serial port under interrupt mode, the IRQ number must be configured. Signed-off-by: Jian Luo Signed-off-by: Bin Meng Acked-by: Simon Glass

x86: Move CONFIG_X86_RESET_VECTOR and CONFIG_SYS_X86_START16 to Kconfig

2015-01-13T15:25:03Z

Convert CONFIG_X86_RESET_VECTOR and CONFIG_SYS_X86_START16 to Kconfig options so that we can remove them from board configuration file. Signed-off-by: Bin Meng Acked-by: Simon Glass