bcm63xx/u-boot/board/keymile/scripts/develop-ppc_8xx.txt, branch master

arm/km: enable FDT for km_kirwkood

2014-02-13T15:17:54Z

This consists of: a) Defining the addresses, enabling fdtsupport [arm] b) Defining "cramfsloadfdt" [arm,powerpc => common] c) Adding the FDT address to bootm [arm,powerpc => common] d) Defining "tftpfdt" in ramfs-,develop- [arm,powerpc >= common] This should work with 3.10 kernels, whether loaded through TFTP (with rootfs either through NFS or TFTP-ramfs) or from the NAND. The machid was left unchanged, this should keep compatibility with both older and newer kernels. Signed-off-by: Valentin Longchamp Signed-off-by: Gerlando Falauto Signed-off-by: Holger Brunck Acked-by: Valentin Longchamp

km/common: simplify debug environment

2011-07-27T21:43:33Z

The debug environment which is stored in textfiles in the scripts directory was reworked. Two usecase are now present which can be executed simply from the default environment: run develop: this configures the environment to setup the rootfs via nfs run ramfs: this configures the environment to setup the rootfs in ram Each architecture now has a "arch" variable which is used to load the architecture specific debug scripts and to set the rootpath for NFS. Signed-off-by: Holger Brunck Signed-off-by: Valentin Longchamp cc: Heiko Schocher cc: Wolfgang Denk