bcm63xx/u-boot/board/lego/ev3/README, branch masterBroadcom-s U-Boothttps://git.openwrt.org/project/bcm63xx/u-boot/atom?h=master2018-06-05T14:33:57ZARM: legoev3: update boot script to load uEnv.txt and .dtb2018-06-05T14:33:57ZDavid Lechner2018-05-20T04:25:07Zurn:sha1:f203a479e7415b539ebcf766591eeafaf481814d
This updates the LEGO MINDSTORMS EV3 boot script to try loading a
uEnv.txt file and a da850-lego-ev3.dtb device tree during boot.
Signed-off-by: David Lechner <david@lechnology.com>
ARM: legoev3: increase flash image sizes2018-06-05T14:33:57ZDavid Lechner2018-05-20T04:25:03Zurn:sha1:1374d88bf391e4b1a23d55eab4d469b68fd7fc4b
This increases the kernel image to 4M and the rootfs image to 10M.
It is getting hard to get a kernel image to fit in 3M.
Signed-off-by: David Lechner <david@lechnology.com>
arm: Add support for LEGO MINDSTORMS EV32016-03-14T23:18:40ZDavid Lechner2016-02-26T06:46:07Zurn:sha1:2ac07f75d1977008e829d00bcce16143e171765d
This is based on the davinci da850evm. It can boot from either the
on-board 16MB flash or from a microSD card. It also reads board
information from an I2C EEPROM.
The EV3 itself initally boots from write-protected EEPROM, so no
u-boot SPL is needed.
Signed-off-by: David Lechner <david@lechnology.com>
Reviewed-by: Tom Rini <trini@konsulko.com>