bcm63xx/u-boot/board/mscc/luton, branch masterBroadcom-s U-Boothttps://git.openwrt.org/project/bcm63xx/u-boot/atom?h=master2019-05-03T14:46:36Zboard: mscc: luton: Update MSCC Luton board2019-05-03T14:46:36ZHoratiu Vultur2019-05-01T11:16:59Zurn:sha1:bd9216e29b81ff2e35d203668f319aaaf396e018
Implement method board_phy_config to configure the external phys
on the pcb90.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
mips: luton: Enable use of serial gpio for LED2019-01-16T12:56:43ZLars Povlsen2019-01-02T08:52:24Zurn:sha1:711f2dc08d7a9ad4f036adc72fcc840d64c1fbb1
This enables the use of the MSCC serial GPIO driver to control the
LEDs on the MSCC VCoreIII 'luton' SoC.
Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>
mips: mscc: luton+ocelot: Remove board config options, do probing2019-01-16T12:56:43ZLars Povlsen2018-12-20T08:56:05Zurn:sha1:e9f1492bcac5127800a25a01e505e225956e2967
As we are moving to multi-dtb and board detection, remove static board
config options, and introduce board probing instead.
Luton: This add single-binary support for the two MSCC luton-based
reference boards - pcb090 and pcb091. The SoC chip ID is used to
determine the board type.
Ocelot: This add single-binary support for the two MSCC ocelot-based
reference boards - pcb120 and pcb123. The PHY ids on specific ports
are used to determine the board type.
Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>
MSCC: add board support for the Luton based evaluation board2018-12-19T14:23:01ZGregory CLEMENT2018-12-14T15:16:50Zurn:sha1:f8c8cedd7ad377cb2a00d35d94dec0dd260117cc
Adding the support for the Luton boards PCB91 which share common code with
the Ocelots boards, including board code, device tree and configuration.
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>