bcm63xx/u-boot/board/mscc/ocelot, branch master

board: mscc: ocelot: Update MSCC Ocelot board.

2019-05-03T14:42:23Z

Implement method board_phy_config to configure the phy for pcb120. Signed-off-by: Horatiu Vultur

MIPS: mscc: ocelot: add switch reset support

2019-01-23T17:26:44Z

On some ocelots platform a workaround is needed in order to be able to reset the switch without resetting the DDR. Signed-off-by: Gregory CLEMENT

MSCC: Add board support for Jaguar2 SOC family

2019-01-16T12:56:43Z

Add board support and configuration for Jaguar2 SOC family. The detection of the board type in this family is based on the phy ids. Signed-off-by: Horatiu Vultur

mips: ocelot: Enable use of serial gpio for LED

2019-01-16T12:56:43Z

This enables the use of the MSCC serial GPIO driver to control the LEDs on the MSCC VCoreIII 'ocelot' pcb123 and pcb120. Signed-off-by: Lars Povlsen

mips: mscc: luton+ocelot: Remove board config options, do probing

2019-01-16T12:56:43Z

As we are moving to multi-dtb and board detection, remove static board config options, and introduce board probing instead. Luton: This add single-binary support for the two MSCC luton-based reference boards - pcb090 and pcb091. The SoC chip ID is used to determine the board type. Ocelot: This add single-binary support for the two MSCC ocelot-based reference boards - pcb120 and pcb123. The PHY ids on specific ports are used to determine the board type. Signed-off-by: Lars Povlsen

MSCC: add board support for the Ocelots based evaluation boards

2018-12-19T14:23:01Z

Adding the support for 2 boards sharing common code for Ocelot chip: PCB120 and PCB123 Signed-off-by: Gregory CLEMENT