bcm63xx/u-boot/board/nokia, branch master

SPDX: Convert all of our single license tags to Linux Kernel style

2018-05-07T13:34:12Z

When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini

env: Rename getenv/_f() to env_get()

2017-08-16T12:30:24Z

We are now using an env_ prefix for environment functions. Rename these two functions for consistency. Also add function comments in common.h. Quite a few places use getenv() in a condition context, provoking a warning from checkpatch. These are fixed up in this patch also. Suggested-by: Wolfgang Denk Signed-off-by: Simon Glass

env: Rename setenv() to env_set()

2017-08-16T12:22:18Z

We are now using an env_ prefix for environment functions. Rename setenv() for consistency. Also add function comments in common.h. Suggested-by: Wolfgang Denk Signed-off-by: Simon Glass

omap-common: Common function to display die id, replacing omap3-specific version

2015-10-22T18:18:30Z

This introduces omap_die_id_display to display the full die id. There is no need to store it in an environment variable, that no boot script is using anyway. Signed-off-by: Paul Kocialkowski Reviewed-by: Tom Rini

Nokia RX-51: Fix calculating return address in save_boot_params

2015-06-12T12:11:18Z

Commit e11c6c279d823dc0d2f470c5c2e3c0a9854a640f broke calculating lr register in function save_boot_params() and caused U-Boot to crash at early boot time on Nokia N900 board. This patch fix calculating return address in lr register and make Nokia N900 board bootable again. Patch was tested in qemu and also on real N900 HW. Reviewed-by: Simon Glass Signed-off-by: Pali Rohár

ARM: OMAP3: rx51: Enable workaround for ARM errata 454179, 430973, 621766

2015-03-13T13:29:33Z

RX51 has a secure logic which uses different parameters compared to traditional implementation. So, make the generic secure acr write over-ride-able by board file and refactor rx51 code to use this. While at it, enable the OMAP3 specific errata code for 454179, 430973, 621766. Signed-off-by: Nishanth Menon Reviewed-by: Tom Rini

arm: Allow lr to be saved by board code

2015-02-16T19:14:54Z

The link register value can be required on some boards (e.g. FEL mode on sunxi) so use a branch instruction to jump to save_boot_params() instead of a branch link. This requires a branch back to save_boot_params_ret so adjust the users to deal with this. For exynos just drop the function since it doesn't do anything. Signed-off-by: Simon Glass Acked-by: Siarhei Siamashka Acked-by: Hans de Goede Signed-off-by: Hans de Goede

Nokia RX-51: Do not call secure PPA routine on non secure devices

2015-01-12T14:38:47Z

Since commit 41623c91b09a0c865fab41acdaff30f060f29ad6 u-boot running in qemu is crashing in function do_omap3_emu_romcode_call(). RX-51 board uses this function for Cortex-A8 errata 430973 workaround (Set IBE bit in ACR) which is needed only on real secure device and not in qemu. This board patch just disable calling secure PPA routine on non secure devices. Qemu implements GP device and with this patch u-boot is working in qemu again. Signed-off-by: Pali Rohár Acked-by: Pavel Machek

omap_hsmmc: Board-specific TWL4030 MMC power initializations

2014-12-05T02:28:15Z

Boards using the TWL4030 regulator may not all use the LDOs the same way (e.g. MMC2 power can be controlled by another LDO than VMMC2). This delegates TWL4030 MMC power initializations to board-specific functions, that may still call twl4030_power_mmc_init for the default behavior. Signed-off-by: Paul Kocialkowski Reviewed-by: Tom Rini [trini: Fix omap3_evm warning, add twl4030.h] Signed-off-by: Tom Rini

kconfig: remove redundant "string" type in arch and board Kconfigs

2014-09-13T20:43:55Z

Now the types of CONFIG_SYS_{ARCH, CPU, SOC, VENDOR, BOARD, CONFIG_NAME} are specified in arch/Kconfig. We can delete the ones in arch and board Kconfig files. This commit can be easily reproduced by the following command: find . -name Kconfig -a ! -path ./arch/Kconfig | xargs sed -i -e ' /config[[:space:]]SYS_\(ARCH\|CPU\|SOC\|\VENDOR\|BOARD\|CONFIG_NAME\)/ { N s/\n[[:space:]]*string// } ' Signed-off-by: Masahiro Yamada