<feed xmlns='http://www.w3.org/2005/Atom'>
<title>bcm63xx/u-boot/board/renesas/ulcb, branch master</title>
<subtitle>Broadcom-s U-Boot</subtitle>
<id>https://git.openwrt.org/project/bcm63xx/u-boot/atom?h=master</id>
<link rel='self' href='https://git.openwrt.org/project/bcm63xx/u-boot/atom?h=master'/>
<link rel='alternate' type='text/html' href='https://git.openwrt.org/project/bcm63xx/u-boot/'/>
<updated>2019-05-21T20:15:32Z</updated>
<entry>
<title>ARM: renesas: Factor out DRAM setup on R-Car Gen3</title>
<updated>2019-05-21T20:15:32Z</updated>
<author>
<name>Marek Vasut</name>
</author>
<published>2019-05-19T21:25:16Z</published>
<link rel='alternate' type='text/html' href='https://git.openwrt.org/project/bcm63xx/u-boot/commit/?id=6ef540d50f3beb0ff94d3fbdae3548b3b8dd05cd'/>
<id>urn:sha1:6ef540d50f3beb0ff94d3fbdae3548b3b8dd05cd</id>
<content type='text'>
Pull DRAM layout configuration code into rcar-common.c instead of
having it in multiple copies across board files. This poses no
change for Salvator-X/XS, ULCB and Ebisu boards, however it adds
a bit of extra code for Draak and Eagle boards, which now gain
the capability of being passed in the DRAM layout by the ATF.

Signed-off-by: Marek Vasut &lt;marek.vasut+renesas@gmail.com&gt;
Cc: Eugeniu Rosca &lt;roscaeugeniu@gmail.com&gt;
Cc: Nobuhiro Iwamatsu &lt;iwamatsu@nigauri.org&gt;
</content>
</entry>
<entry>
<title>ARM: rmobile: Add recovery SPL for R-Car Gen3</title>
<updated>2019-05-21T20:15:31Z</updated>
<author>
<name>Marek Vasut</name>
</author>
<published>2018-10-03T10:44:13Z</published>
<link rel='alternate' type='text/html' href='https://git.openwrt.org/project/bcm63xx/u-boot/commit/?id=5602330df0306a44d78c1ba67ab7e15aa6f3fc41'/>
<id>urn:sha1:5602330df0306a44d78c1ba67ab7e15aa6f3fc41</id>
<content type='text'>
Build an SPL which can be started via SCIF download mode on R-Car Gen3
and allows loading and executing U-Boot uImage with the next stage code.
This is also useful for starting e.g. ATF BL2, which inits the hardware
and returns to the U-Boot SPL, which can then load e.g. U-Boot proper.

The H3, M3-W, M3-N SoCs have plenty of SRAM for storing the U-Boot SPL
while the payload, e.g. ATF BL2, executes, so there is no problem here.

However, E3 and D3 have much less SRAM, hence the loader uses a trick
where it copies itself beyond the area used by BL2 and executes from
there. That area is 32kiB large and not enough to hold U-Boot SPL, BSS,
stack and malloc area, so the later two are placed at +0x4000 offset
from start of SRAM, another area not used by ATF BL2. To make things
even more complicated, the SCIF loader cannot load to the upper 32kiB
of the SRAM directly, hence the copying approach.

Signed-off-by: Marek Vasut &lt;marek.vasut+renesas@gmail.com&gt;
Cc: Nobuhiro Iwamatsu &lt;iwamatsu@nigauri.org&gt;
</content>
</entry>
<entry>
<title>ARM: renesas: Configure DRAM size from ATF DT fragment</title>
<updated>2019-05-04T17:26:49Z</updated>
<author>
<name>Marek Vasut</name>
</author>
<published>2018-10-02T18:40:58Z</published>
<link rel='alternate' type='text/html' href='https://git.openwrt.org/project/bcm63xx/u-boot/commit/?id=175f5027345c7feaa41e8f4201778814bf72fe37'/>
<id>urn:sha1:175f5027345c7feaa41e8f4201778814bf72fe37</id>
<content type='text'>
The ATF can pass additional information via the first four registers,
x0...x3. The R-Car Gen3 with mainline ATF, register x1 contains pointer
to a device tree with platform information. Parse this device tree and
extract DRAM size information from it. This is useful on systems where
the DRAM size can vary between configurations.

Signed-off-by: Marek Vasut &lt;marek.vasut+renesas@gmail.com&gt;
Cc: Nobuhiro Iwamatsu &lt;iwamatsu@nigauri.org&gt;
</content>
</entry>
<entry>
<title>ARM: rmobile: Add R8A77965 M3NULCB support</title>
<updated>2019-04-09T16:19:10Z</updated>
<author>
<name>Marek Vasut</name>
</author>
<published>2019-03-04T11:34:50Z</published>
<link rel='alternate' type='text/html' href='https://git.openwrt.org/project/bcm63xx/u-boot/commit/?id=c4ea43d12f7268b6cabbbe8c153e8f67d11c9081'/>
<id>urn:sha1:c4ea43d12f7268b6cabbbe8c153e8f67d11c9081</id>
<content type='text'>
Add defconfig and board specific adjustments for the R8A77965 M3N ULCB.

Signed-off-by: Marek Vasut &lt;marek.vasut+renesas@gmail.com&gt;
Cc: Nobuhiro Iwamatsu &lt;iwamatsu@nigauri.org&gt;
</content>
</entry>
<entry>
<title>ARM: dts: Turn ULCB into Multi-DTB config</title>
<updated>2018-12-04T08:21:07Z</updated>
<author>
<name>Marek Vasut</name>
</author>
<published>2018-12-04T00:44:34Z</published>
<link rel='alternate' type='text/html' href='https://git.openwrt.org/project/bcm63xx/u-boot/commit/?id=04513805054478aa024b6c67cb1dcdcd1b37625a'/>
<id>urn:sha1:04513805054478aa024b6c67cb1dcdcd1b37625a</id>
<content type='text'>
Bundle DTBs for R8A7795, R8A7796 ULCB variants into single U-Boot
build and let U-Boot choose between them based on the CPU model.

Signed-off-by: Marek Vasut &lt;marek.vasut+renesas@gmail.com&gt;
Cc: Nobuhiro Iwamatsu &lt;iwamatsu@nigauri.org&gt;
</content>
</entry>
<entry>
<title>ARM: rmobile: Drop unused macros from Gen3 boards</title>
<updated>2018-12-04T08:21:07Z</updated>
<author>
<name>Marek Vasut</name>
</author>
<published>2018-12-04T00:32:29Z</published>
<link rel='alternate' type='text/html' href='https://git.openwrt.org/project/bcm63xx/u-boot/commit/?id=3ba61f06729caa337f1071e84a2129218d290f90'/>
<id>urn:sha1:3ba61f06729caa337f1071e84a2129218d290f90</id>
<content type='text'>
Drop unused MSTP macros from Gen3 boards. These are no longer needed
as the boards are using clock framework to manipulate clock.

Signed-off-by: Marek Vasut &lt;marek.vasut+renesas@gmail.com&gt;
Cc: Nobuhiro Iwamatsu &lt;iwamatsu@nigauri.org&gt;
</content>
</entry>
<entry>
<title>ARM: rmobile: Fix module clock controls refer status on Gen3</title>
<updated>2018-10-18T17:07:47Z</updated>
<author>
<name>Hiroyuki Yokoyama</name>
</author>
<published>2018-09-26T07:00:09Z</published>
<link rel='alternate' type='text/html' href='https://git.openwrt.org/project/bcm63xx/u-boot/commit/?id=cf97b2213a60417e030e530d472f25ded49ee5b8'/>
<id>urn:sha1:cf97b2213a60417e030e530d472f25ded49ee5b8</id>
<content type='text'>
When referring to the MSTPSR register, it contains the clock
status of SYS, RT, SECURE, and controlling SMSTPCR using this
value has the problem of being affected by the RT and SECURE
status.This patch changes the reference register to SMSTPCR.

Signed-off-by: Hiroyuki Yokoyama &lt;hiroyuki.yokoyama.vx@renesas.com&gt;
</content>
</entry>
<entry>
<title>ARM: rmobile: Tidy up SYSC_PWRx define of 3DG on Gen3</title>
<updated>2018-10-18T17:07:46Z</updated>
<author>
<name>Hiroyuki Yokoyama</name>
</author>
<published>2017-03-23T01:35:41Z</published>
<link rel='alternate' type='text/html' href='https://git.openwrt.org/project/bcm63xx/u-boot/commit/?id=4cb71e248f4cee437a5913d0d618f62058ea36ef'/>
<id>urn:sha1:4cb71e248f4cee437a5913d0d618f62058ea36ef</id>
<content type='text'>
Tidy up unused definition related to power control of 3DG.

Signed-off-by: Hiroyuki Yokoyama &lt;hiroyuki.yokoyama.vx@renesas.com&gt;
</content>
</entry>
<entry>
<title>ARM: rmobile: Remove Watchdog and CPG settings on Gen3</title>
<updated>2018-10-18T17:07:46Z</updated>
<author>
<name>Hiroyuki Yokoyama</name>
</author>
<published>2018-09-25T09:48:03Z</published>
<link rel='alternate' type='text/html' href='https://git.openwrt.org/project/bcm63xx/u-boot/commit/?id=1c1fd9f9689b6a963cb959d95cb884dd783af823'/>
<id>urn:sha1:1c1fd9f9689b6a963cb959d95cb884dd783af823</id>
<content type='text'>
This code is unnecessary, because these registers are set by the
initial program loader (IPL).

Signed-off-by: Hiroyuki Yokoyama &lt;hiroyuki.yokoyama.vx@renesas.com&gt;
</content>
</entry>
<entry>
<title>ARM: rmobile: Remove TMU0/TMU1 settings on Gen3</title>
<updated>2018-10-18T17:07:46Z</updated>
<author>
<name>Hiroyuki Yokoyama</name>
</author>
<published>2016-03-30T01:56:21Z</published>
<link rel='alternate' type='text/html' href='https://git.openwrt.org/project/bcm63xx/u-boot/commit/?id=6f5658219886961afeacfc4af3a9eef31e36e2a9'/>
<id>urn:sha1:6f5658219886961afeacfc4af3a9eef31e36e2a9</id>
<content type='text'>
U-Boot uses ARM generic timer, TMU0 and TMU1 are not used, remove them.

Signed-off-by: Hiroyuki Yokoyama &lt;hiroyuki.yokoyama.vx@renesas.com&gt;
</content>
</entry>
</feed>
