Broadcom-s U-Boot https://git.openwrt.org/project/bcm63xx/u-boot/atom?h=master 2019-06-27T12:09:28Z 2019-06-27T12:09:28Z Fabio Estevam 2019-04-26T12:36:23Z urn:sha1:36adc9a06f64bffc327457418b5b6506ad1d18b4 After the conversion to DM the U-Boot binary is called u-boot-dtb.imx, so fix the README file accordingly. Signed-off-by: Fabio Estevam <festevam@gmail.com> Acked-by: Joris Offouga <offougajoris@gmail.com> 2019-06-11T08:42:48Z Fabio Estevam 2019-04-26T16:56:34Z urn:sha1:3bb514adbfa2a3bf3d08b9e3221c3baa07881547 pico-dwarf-imx6ul_defconfig does not have an entry in MAINTAINERS file, so add it to avoid a build warning. Reported-by: Stefano Babic <sbabic@denx.de> Signed-off-by: Fabio Estevam <festevam@gmail.com> 2019-06-11T08:42:48Z Fabio Estevam 2019-04-26T16:56:33Z urn:sha1:d73ce5e754087c45586a1591ab01d7fd73327dc1 It is easier to consolidate all boards into a single entry. Signed-off-by: Fabio Estevam <festevam@gmail.com> 2019-06-11T08:42:48Z Fabio Estevam 2019-04-26T16:56:32Z urn:sha1:f4825ab6439092d9344d79d06b0f0999eb7dd440 It is easier to consolidate all boards into a single entry. Signed-off-by: Fabio Estevam <festevam@gmail.com> 2019-06-11T08:42:48Z Jun Nie 2019-05-08T06:38:36Z urn:sha1:c72a23701bd9b15dab35e0d43c468ab051739af3 If PMIC is not probed successfully, it is still OK to boot with default configuration although power is not optimized. Default voltage of SW1A/SW1B is 1.1V/1.0V for PC32PF3000A1EP on pico according to table 42 of spec of PF3000 ver 9.0. Default mode of SW1A/SW1B is APS as expected(table 47). Signed-off-by: Jun Nie <jun.nie@linaro.org> 2019-06-11T08:42:48Z Jun Nie 2019-05-08T06:38:35Z urn:sha1:76ed1036c2ebf2c27ce5c0c2470dda215d73a560 Add Documentation of BL33 usage case. U-boot is in non-secure world in this case. Signed-off-by: Jun Nie <jun.nie@linaro.org> 2019-06-11T08:42:48Z Jun Nie 2019-05-08T06:38:32Z urn:sha1:1d3b852e52d85d96c9cd4491da3daf42e3aef760 Subtracts CONFIG_OPTEE_TZDRAM_SIZE from the available DRAM size so that the OPTEE memory is not override during u-boot relocation. Note the OPTEE live in the end part of DRAM and OPTEE boot process will itself subtract the DRAM region it lives in from the memory map passed to Linux. Signed-off-by: Jun Nie <jun.nie@linaro.org> Reviewed-by: Peng Fan <peng.fan@nxp.com> 2019-05-28T17:58:06Z Bartosz Golaszewski 2019-05-17T09:17:19Z urn:sha1:2aa20c43e464b8e5e554b86c51334d789833f254 This board still doesn't select CONFIG_DM and seems to be umaintained. As it makes progress on modernizing several DaVinci drivers more difficult and the maintainer has not expressed interest in updating it, this patch proposes to remove it. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Acked-by: Stefano Babic <sbabic@denx.de> 2019-04-25T17:16:24Z Joris Offouga 2019-04-04T12:00:55Z urn:sha1:4e267b92fb28a4f626c1d27ad71e21cf4df2935b This patch enable convert DM MMC for imx7d-pico board and variant. Before the DM conversion only usdhc3 was enabled and therefore it appeared as MMC 0 to u-boot. After enabling MMC DM though usdhc3 defaults to MMC 2, which left unattended would drive changes to existing pico-pi bootscripts and environment variables that rely on mmc 0. Setup the alias of mmc0 and usdhc3 so that existing pico-imx7d boot code will work unmodified. When converting to DM_MMC it is necessary that SPL initializes eMMC by itself, so move the original eMMC initialization from U-Boot proper to SPL. Signed-off-by: Joris Offouga <offougajoris@gmail.com> Signed-off-by: Fabio Estevam <festevam@gmail.com> 2019-04-25T17:16:24Z Joris Offouga 2019-04-04T12:00:54Z urn:sha1:d5f3a470de7fb65bc43608e58812d21789fad7b0 This patch is necessary for convert this board to dm driver model DM GPIO requires gpio_request() to be called explicitly before doing any gpio operation Signed-off-by: Joris Offouga <offougajoris@gmail.com>