bcm63xx/u-boot/board/ti/evm, branch master

ARM: omap3: evm: Update DM SPL support

2019-02-19T21:58:24Z

- Switch to using the omap3-u-boot.dtsi file for needed properties - Enable SPL_OF_CONTROL This commit is based on the following series: https://patchwork.ozlabs.org/project/uboot/list/?series=92472 https://patchwork.ozlabs.org/project/uboot/list/?series=92462 Signed-off-by: Derald D. Woods Reviewed-by: Tom Rini

SPDX: Convert all of our single license tags to Linux Kernel style

2018-05-07T13:34:12Z

When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini

ARM: omap3: evm: Refactor 'board_eth_init'

2018-01-01T14:04:19Z

This commit clears 'ethaddr' before calling 'smc911x_initialize' to allow the SROM MAC address to be assigned properly. Signed-off-by: Derald D. Woods

mtd: nand: Rename nand.h into rawnand.h

2017-12-04T13:00:00Z

This header was renamed to rawnand.h in Linux. The following is the corresponding commit in Linux. commit d4092d76a4a4e57b65910899948a83cc8646c5a5 Author: Boris Brezillon Date: Fri Aug 4 17:29:10 2017 +0200 mtd: nand: Rename nand.h into rawnand.h We are planning to share more code between different NAND based devices (SPI NAND, OneNAND and raw NANDs), but before doing that we need to move the existing include/linux/mtd/nand.h file into include/linux/mtd/rawnand.h so we can later create a nand.h header containing all common structure and function prototypes. Signed-off-by: Masahiro Yamada

omap3: evm: Fixes for CONFIG_NAND, SPL_OS_BOOT, USB, and environment

2017-09-03T19:30:36Z

- Pass MTDPARTS kernel arguments to kernel - Use Kconfig CONFIG_NAND instead of CONFIG_SYS_EXTRA_OPTIONS="NAND" - Call 'usb_stop' on kernel start - Update Falcon mode setup to match other OMAP3 boards - Use "uEnv.txt" as boot script instead of "boot.scr"

env: Rename eth_getenv_enetaddr() to eth_env_get_enetaddr()

2017-08-16T12:30:44Z

Rename this function for consistency with env_get(). Signed-off-by: Simon Glass

env: Rename eth_setenv_enetaddr() to eth_env_set_enetaddr()

2017-08-16T12:23:56Z

Rename this function for consistency with env_set(). Signed-off-by: Simon Glass

omap3: evm: Update board, defconfig, and maintainer file

2017-08-11T21:44:54Z

This patch brings the OMAP3 EVM to a bootable state, on master, as of v2017.09-rc1. Signed-off-by: Derald D. Woods Reviewed-by: Tom Rini

Configs: Migrate CONFIG_SYS_I2C_OMAP34XX to CONFIG_SYS_I2C_OMAP24XX

2017-08-09T04:14:13Z

The driver is for all boards 24XX and up, so let's eliminate the extra option called CONFIG_SYS_I2C_OMAP34XX since the driver checks for CONFIG_OMAP34XX we don't need CONFIG_SYS_I2C_OMAP34XX. Signed-off-by: Adam Ford Reviewed-by: Heiko Schocher

mmc: replace CONFIG_GENERIC_MMC with CONFIG_MMC

2017-05-15T09:28:23Z

Now CONFIG_GENERIC_MMC and CONFIG_MMC match for all defconfig. We do not need two options for the same feature. Deprecate the former. This commit was generated with the sed script 's/GENERIC_MMC/MMC/' and manual fixup of drivers/mmc/Kconfig. Signed-off-by: Masahiro Yamada