bcm63xx/u-boot/board/toradex, branch master

board: toradex: add apalis imx8qm 4gb wb it v1.0b module support

2019-06-11T08:42:48Z

This commit adds initial support for the Toradex Apalis iMX8QM 4GB WB IT V1.0B module. Unlike the V1.0A early access samples exclusively booting from SD card, they are now strapped to boot from eFuses which are factory fused to properly boot from their on-module eMMC. U-Boot supports either booting from the on-module eMMC or may be used for recovery purpose using the universal update utility (uuu) aka mfgtools 3.0. Functionality wise the following is known to be working: - eMMC, 8-bit and 4-bit MMC/SD card slots - Gigabit Ethernet - GPIOs - I2C Unfortunately, there is no USB functionality for the i.MX 8QM as of yet. Signed-off-by: Marcel Ziswiler Reviewed-by: Max Krummenacher

ARM: imx: apalis_imx6: Drop ad-hoc SATA binding

2019-06-11T08:42:48Z

Drop the ad-hoc AHCI binding code, this is superseded by CONFIG_DWC_AHSATA_AHCI=y resp. drivers/ata/dwc_ahsata.c Signed-off-by: Marek Vasut Cc: Fabio Estevam Cc: Marcel Ziswiler Cc: Max Krummenacher Cc: Stefan Agner Cc: Stefano Babic Acked-by: Marcel Ziswiler

board: toradex: add colibri imx8qxp 2gb wb it v1.0b module support

2019-06-11T08:42:48Z

This commit adds initial support for the Toradex Colibri iMX8QXP 2GB WB IT V1.0B module. Unlike the V1.0A early access samples exclusively booting from SD card, they are now strapped to boot from eFuses which are factory fused to properly boot from their on-module eMMC. U-Boot supports either booting from the on-module eMMC or may be used for recovery purpose using the universal update utility (uuu) aka mfgtools 3.0. Functionality wise the following is known to be working: - eMMC and MMC/SD card - Ethernet - GPIOs - I2C Unfortunately, there is no USB functionality for the i.MX 8QXP as of yet. Signed-off-by: Marcel Ziswiler Reviewed-by: Igor Opaniuk

board: toradex: drop support.arm maintainer email

2019-05-05T12:48:50Z

Drop Toradex ARM Support from maintainer email list as this just clogs our support ticketing system. Signed-off-by: Marcel Ziswiler Acked-by: Stefan Agner

board: toradex: tdx-cfg-block: add new skus

2019-04-25T17:16:24Z

Add all the latest new SKUs: - Apalis iMX8 QuadXPlus 2GB Wi-Fi / BT IT - Apalis iMX8 QuadMax 4GB IT - Apalis iMX8 QuadPlus 2GB Wi-Fi / BT - Apalis iMX8 QuadPlus 2GB", - Colibri iMX8 QuadXPlus 2GB IT - Colibri iMX8 DualX 1GB Wi-Fi / Bluetooth - Colibri iMX8 DualX 1GB Signed-off-by: Marcel Ziswiler Reviewed-by: Igor Opaniuk

board: toradex: tdx-cfg-block: clean-up sku handling

2019-04-25T17:16:24Z

Clean-up handling of several SKUs. Signed-off-by: Marcel Ziswiler Reviewed-by: Igor Opaniuk

colibri-imx6ull: migrate usb to using driver model

2019-04-25T15:03:25Z

Migrate USB to using driver model. Add USBH_PEN GPIO regulator. While at it also add alias e.g. as required for UMS. Signed-off-by: Marcel Ziswiler Reviewed-by: Igor Opaniuk

colibri-imx6ull: migrate mmc to using driver model

2019-04-25T15:03:25Z

Migrate MMC to using driver model. Migrate USDHC to using pinctrl. While at it also add GPIO1_IO03__OSC32K_32K_OUT pin muxing. While at it also update copyright period. Signed-off-by: Marcel Ziswiler Reviewed-by: Igor Opaniuk

colibri-imx6ull: migrate pinctrl and regulators to dtb/dm

2019-04-25T15:03:25Z

Migrate pinctrl and regulators to device tree resp. driver model: Ethernet, NAND and UART. Drop BOARD_EARLY_INIT_F as it is anyway no longer used. Enable CMD_DM, CMD_MTD, CMD_REGULATOR and DM_REGULATOR_FIXED. While at it also update copyright period. Signed-off-by: Marcel Ziswiler Reviewed-by: Igor Opaniuk

board: imx6ull: Add disable PMIC_STBY_REQ

2019-04-25T15:03:25Z

Disable output driver of PAD CCM_PMIC_STBY_REQ. This prevents the SOC to request for a lower voltage during sleep. This is necessary because the voltage is changing too slow for the SOC to wake up properly. Signed-off-by: Philippe Schenker Acked-by: Marcel Ziswiler Reviewed-by: Igor Opaniuk