Broadcom-s U-Boot https://git.openwrt.org/project/bcm63xx/u-boot/atom?h=master 2019-04-30T01:41:40Z 2019-04-30T01:41:40Z Simon Goldschmidt 2018-09-30T12:31:53Z urn:sha1:f89d6133eef2e068f9c33853b6584d7fcbfa9d2e Moved CONFIG_SPL_TEXT_BASE to common/spl/Kconfig and migrate existing values. Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> [trini: Re-run migration] Signed-off-by: Tom Rini <trini@konsulko.com> 2019-04-30T01:41:40Z Tom Rini 2019-04-29T19:54:04Z urn:sha1:d168bcb6fe39108042c0c771f0823a95346a8e7e Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com> 2019-03-25T21:36:53Z Patrick Delaunay 2019-02-27T14:20:36Z urn:sha1:14453fbfadc2f98ca35d6033140466c7a4b4947a This converts the following to Kconfig: CONFIG_SF_DEFAULT_BUS CONFIG_SF_DEFAULT_CS CONFIG_SF_DEFAULT_MODE CONFIG_SF_DEFAULT_SPEED I use moveconfig script and then manual check on generated u-boot.cfg to solve the remaining issue. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> 2019-02-22T15:17:41Z Tom Rini 2019-02-22T15:17:41Z urn:sha1:fca0128da48031286f0cb2414ee6c94e9162943c Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com> 2019-02-20T16:01:44Z Peter Robinson 2019-02-20T12:17:27Z urn:sha1:747fed56d3876d7de89959f9a927901e02166151 Migrate USB_EHCI_TEGRA from headers to Kconfig Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Cc: Tom Warren <twarren@nvidia.com> Cc: Stephen Warren <swarren@nvidia.com> Cc: Marek Vasut <marex@denx.de> Cc: Marcel Ziswiler <marcel.ziswiler@toradex.com> Cc: Peter.Chubb@data61.csiro.au Cc: Lucas Stach <dev@lynxeye.de> Cc: Stefan Agner <stefan.agner@toradex.com> Cc: Alban Bedel <alban.bedel@avionic-design.de> Cc: Allen Martin <amartin@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com> 2019-02-20T16:01:44Z Peter Robinson 2019-02-20T12:17:26Z urn:sha1:02253d4d12667b99dc7538b0427353a8c8221514 Migrate SYS_I2C_TEGRA from headers to Kconfig Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Cc: Tom Warren <twarren@nvidia.com> Cc: Stephen Warren <swarren@nvidia.com> Cc: Heiko Schocher <hs@denx.de> Cc: Marcel Ziswiler <marcel.ziswiler@toradex.com> Cc: Peter.Chubb@data61.csiro.au Cc: Lucas Stach <dev@lynxeye.de> Cc: Stefan Agner <stefan.agner@toradex.com> Cc: Alban Bedel <alban.bedel@avionic-design.de> Cc: Allen Martin <amartin@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com> 2019-01-07T23:11:00Z Tom Rini 2019-01-07T22:46:19Z urn:sha1:1bac199e8c876c37f31adeb23a75ae1ca12aea7f Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com> 2018-09-03T19:26:12Z Tom Rini 2018-09-03T19:26:12Z urn:sha1:8c5cad05c97122b33ef8de981b56f701d6bfb6ea Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com> 2018-08-16T20:45:02Z Tom Rini 2018-08-16T12:16:24Z urn:sha1:86cf1c82850f7c226f23684e19616e526ffaf10f We have the following cases: - CONFIG_NR_DRAM_BANKS was defined, migrate normally - CONFIG_NR_DRAM_BANKS_MAX was defined and then used for CONFIG_NR_DRAM_BANKS after a check, just migrate it over now. - CONFIG_NR_DRAM_BANKS was very oddly defined on p2771-0000-* (to 1024 + 2), set this to 8. Signed-off-by: Tom Rini <trini@konsulko.com> 2018-04-16T22:45:35Z Alexander Graf 2018-04-12T07:58:44Z urn:sha1:4f67b93fb7f558dbdd5f7a3e763ec19b6ec62460 We enabled CONFIG_ISO_PARTITION by default for distro boot, so that U-Boot could load distro images that usually get shipped as iso images. These images usually come with a board agnostic boot environment. However, there is very little point in having ISO support enabled (for anyone really) in SPL, as the whole idea of SPL is to load U-Boot proper which again is board specific. So the fact that we enable ISO support in U-Boot proper does not mean at all that we want ISO support in U-Boot SPL. Hence, let's remove the Kconfig dependency. Along the way, let's also clean up all those default configs that disabled SPL ISO support. Signed-off-by: Alexander Graf <agraf@suse.de>