<feed xmlns='http://www.w3.org/2005/Atom'>
<title>bcm63xx/u-boot/configs/flea3_defconfig, branch master</title>
<subtitle>Broadcom-s U-Boot</subtitle>
<id>https://git.openwrt.org/project/bcm63xx/u-boot/atom?h=master</id>
<link rel='self' href='https://git.openwrt.org/project/bcm63xx/u-boot/atom?h=master'/>
<link rel='alternate' type='text/html' href='https://git.openwrt.org/project/bcm63xx/u-boot/'/>
<updated>2019-05-18T12:15:34Z</updated>
<entry>
<title>CONFIG_SYS_[DI]CACHE_OFF: convert to Kconfig</title>
<updated>2019-05-18T12:15:34Z</updated>
<author>
<name>Trevor Woerner</name>
</author>
<published>2019-05-03T13:40:59Z</published>
<link rel='alternate' type='text/html' href='https://git.openwrt.org/project/bcm63xx/u-boot/commit/?id=a0aba8a2ebae51287fbee6848aece71655795fdb'/>
<id>urn:sha1:a0aba8a2ebae51287fbee6848aece71655795fdb</id>
<content type='text'>
CONFIG_SYS_[DI]CACHE_OFF had been partially converted to Kconfig
parameters; only for the ARC architecture. This patch turns these two
parameters into Kconfig items everywhere else they are found.

All of the include/configs/* and defconfig changes in this patch are
for arm machines only. The Kconfig changes for arc, nds32, riscv,
and xtensa have been included since these symbols are found in code
under arch/{arc,nds32,riscv,xtensa}, however, no currently-defined
include/configs/* or defconfigs for these architectures exist which
include these symbols.

These results have been confirmed with tools/moveconfig.py.

Acked-by: Alexey Brodkin &lt;abrodkin@snopsys.com&gt;
Signed-off-by: Trevor Woerner &lt;trevor@toganlabs.com&gt;
[trini: Re-migrate for a few more boards]
Signed-off-by: Tom Rini &lt;trini@konsulko.com&gt;
</content>
</entry>
<entry>
<title>net: phy: micrel: Allow KSZ8xxx and KSZ90x1 to be used together</title>
<updated>2019-05-14T19:43:33Z</updated>
<author>
<name>James Byrne</name>
</author>
<published>2019-03-06T12:48:27Z</published>
<link rel='alternate' type='text/html' href='https://git.openwrt.org/project/bcm63xx/u-boot/commit/?id=77b508d34b9485c981b084e8169dd64b381935b6'/>
<id>urn:sha1:77b508d34b9485c981b084e8169dd64b381935b6</id>
<content type='text'>
Commit d397f7c45b0b ("net: phy: micrel: Separate KSZ9000 drivers from
KSZ8000 drivers") separated the KSZ8xxx and KSZ90x1 drivers and warns
that you shouldn't select both of them due to a device ID clash between
the KSZ9021 and the KS8721, asserting that "it is highly unlikely for a
system to contain both a KSZ8000 and a KSZ9000 PHY". Unfortunately
boards like the SAMA5D3xEK do contain both types of PHY, but fortunately
the Linux Micrel PHY driver provides a solution by using different PHY
ID and mask values to distinguish these chips.

This commit contains the following changes:

- The PHY ID and mask values for the KSZ9021 and the KS8721 now match
those used by the Linux driver.
- The warnings about not enabling both drivers have been removed.
- The description for PHY_MICREL_KSZ8XXX has been corrected (these are
10/100 PHYs, not GbE PHYs).
- PHY_MICREL_KSZ9021 and PHY_MICREL_KSZ9031 no longer select PHY_GIGE
since this is selected by PHY_MICREL_KSZ90X1.
- All of the relevant defconfig files have been updated now that
PHY_MICREL_KSZ8XXX does not default to 'Y'.

Signed-off-by: James Byrne &lt;james.byrne@origamienergy.com&gt;
Acked-by: Joe Hershberger &lt;joe.hershberger@ni.com&gt;
</content>
</entry>
<entry>
<title>configs: Migrate and re-enabled CONFIG_CMD_MTDPARTS</title>
<updated>2018-11-14T15:53:27Z</updated>
<author>
<name>Tom Rini</name>
</author>
<published>2018-11-14T00:54:45Z</published>
<link rel='alternate' type='text/html' href='https://git.openwrt.org/project/bcm63xx/u-boot/commit/?id=cbabe7f87f87c47a2d1e31c4bba1de375e3c85df'/>
<id>urn:sha1:cbabe7f87f87c47a2d1e31c4bba1de375e3c85df</id>
<content type='text'>
Now that CMD_UBI does not select CMD_MTDPARTS we need to make platforms
that had been enabling it turn it on by hand.  This exposed that we had
not yet migrated CMD_MTDPARTS fully, so do so now.

Fixes: 86dfa556d927 ("cmd: ubi: Remove useless call to mtdparts_init()")
Signed-off-by: Tom Rini &lt;trini@konsulko.com&gt;
</content>
</entry>
<entry>
<title>Convert CONFIG_FLASH_CFI_DRIVER et al to Kconfig</title>
<updated>2018-10-19T23:19:50Z</updated>
<author>
<name>Adam Ford</name>
</author>
<published>2018-10-14T20:10:50Z</published>
<link rel='alternate' type='text/html' href='https://git.openwrt.org/project/bcm63xx/u-boot/commit/?id=2fe88d452268d61b5ca9cb0b1dda2974cc43faeb'/>
<id>urn:sha1:2fe88d452268d61b5ca9cb0b1dda2974cc43faeb</id>
<content type='text'>
This converts the following to Kconfig:
   CONFIG_FLASH_CFI_DRIVER
   CONFIG_SYS_FLASH_USE_BUFFER_WRITE
   CONFIG_FLASH_CFI_MTD
   CONFIG_SYS_FLASH_PROTECTION
   CONFIG_SYS_FLASH_CFI

Signed-off-by: Adam Ford &lt;aford173@gmail.com&gt;
[trini: Re-migrate]
Signed-off-by: Tom Rini &lt;trini@konsulko.com&gt;
</content>
</entry>
<entry>
<title>Convert CONFIG_MII et al to Kconfig</title>
<updated>2018-08-17T17:03:54Z</updated>
<author>
<name>Adam Ford</name>
</author>
<published>2018-07-21T04:03:57Z</published>
<link rel='alternate' type='text/html' href='https://git.openwrt.org/project/bcm63xx/u-boot/commit/?id=d7869b2183d2b786e5410b97a5a6b2e630e7825e'/>
<id>urn:sha1:d7869b2183d2b786e5410b97a5a6b2e630e7825e</id>
<content type='text'>
This converts the following to Kconfig:
   CONFIG_MII
   CONFIG_DRIVER_TI_EMAC

Signed-off-by: Adam Ford &lt;aford173@gmail.com&gt;
Acked-by: Jagan Teki &lt;jagan@amarulasolutions.com&gt;
Acked-by: Joe Hershberger &lt;joe.hershberger@ni.com&gt;
</content>
</entry>
<entry>
<title>configs: Migrate CONFIG_NR_DRAM_BANKS</title>
<updated>2018-08-16T20:45:02Z</updated>
<author>
<name>Tom Rini</name>
</author>
<published>2018-08-16T12:16:24Z</published>
<link rel='alternate' type='text/html' href='https://git.openwrt.org/project/bcm63xx/u-boot/commit/?id=86cf1c82850f7c226f23684e19616e526ffaf10f'/>
<id>urn:sha1:86cf1c82850f7c226f23684e19616e526ffaf10f</id>
<content type='text'>
We have the following cases:
- CONFIG_NR_DRAM_BANKS was defined, migrate normally
- CONFIG_NR_DRAM_BANKS_MAX was defined and then used for
  CONFIG_NR_DRAM_BANKS after a check, just migrate it over now.
- CONFIG_NR_DRAM_BANKS was very oddly defined on p2771-0000-* (to 1024 +
  2), set this to 8.

Signed-off-by: Tom Rini &lt;trini@konsulko.com&gt;
</content>
</entry>
<entry>
<title>Convert CONFIG_MTD_PARTITIONS et al to Kconfig</title>
<updated>2018-07-22T23:20:17Z</updated>
<author>
<name>Adam Ford</name>
</author>
<published>2018-07-08T03:18:22Z</published>
<link rel='alternate' type='text/html' href='https://git.openwrt.org/project/bcm63xx/u-boot/commit/?id=9c5b00973bceb7c0192bd6b03672d69b092700b4'/>
<id>urn:sha1:9c5b00973bceb7c0192bd6b03672d69b092700b4</id>
<content type='text'>
This converts the following to Kconfig:
   CONFIG_MTD_PARTITIONS
   CONFIG_MTD_DEVICE

Signed-off-by: Adam Ford &lt;aford173@gmail.com&gt;
</content>
</entry>
<entry>
<title>Convert CONFIG_SPI to Kconfig</title>
<updated>2018-04-27T18:54:11Z</updated>
<author>
<name>Adam Ford</name>
</author>
<published>2018-04-15T17:51:26Z</published>
<link rel='alternate' type='text/html' href='https://git.openwrt.org/project/bcm63xx/u-boot/commit/?id=f1b1f77060beadbfe9f42a3be00019bd025afbd6'/>
<id>urn:sha1:f1b1f77060beadbfe9f42a3be00019bd025afbd6</id>
<content type='text'>
This converts the following to Kconfig:
   CONFIG_SPI

This partly involves updating code that assumes that CONFIG_SPI implies
things that are specific to the MPC8xx SPI driver.  For now, just update
the CONFIG tests.  This also involves reworking the default for
CONFIG_SYS_DEF_EEPROM_ADDR so that we don't set it when we cannot make a
reasonable default, as it does not cause any compile failures.

Signed-off-by: Adam Ford &lt;aford173@gmail.com&gt;
Signed-off-by: Tom Rini &lt;trini@konsulko.com&gt;
</content>
</entry>
<entry>
<title>configs: Resync with savedefconfig</title>
<updated>2018-04-17T14:10:47Z</updated>
<author>
<name>Tom Rini</name>
</author>
<published>2018-04-17T13:22:31Z</published>
<link rel='alternate' type='text/html' href='https://git.openwrt.org/project/bcm63xx/u-boot/commit/?id=34b3722e381c0146b4aa7fea3a5243c588b8ed2f'/>
<id>urn:sha1:34b3722e381c0146b4aa7fea3a5243c588b8ed2f</id>
<content type='text'>
Rsync all defconfig files using moveconfig.py

Signed-off-by: Tom Rini &lt;trini@konsulko.com&gt;
</content>
</entry>
<entry>
<title>Convert CONFIG_BOOTP_BOOTPATH et al to Kconfig</title>
<updated>2018-02-24T02:41:49Z</updated>
<author>
<name>Adam Ford</name>
</author>
<published>2018-02-06T13:58:59Z</published>
<link rel='alternate' type='text/html' href='https://git.openwrt.org/project/bcm63xx/u-boot/commit/?id=d021e942107a1f7304a879cec99286ca462f7be3'/>
<id>urn:sha1:d021e942107a1f7304a879cec99286ca462f7be3</id>
<content type='text'>
This converts the following to Kconfig:
   CONFIG_BOOTP_BOOTPATH
   CONFIG_BOOTP_DNS
   CONFIG_BOOTP_GATEWAY
   CONFIG_BOOTP_HOSTNAME
   CONFIG_BOOTP_PXE
   CONFIG_BOOTP_SUBNETMASK
   CONFIG_CMDLINE_EDITING
   CONFIG_AUTO_COMPLETE
   CONFIG_SYS_LONGHELP
   CONFIG_SUPPORT_RAW_INITRD
   CONFIG_ENV_VARS_UBOOT_CONFIG

Signed-off-by: Adam Ford &lt;aford173@gmail.com&gt;
[trini: Re-run the migration]
Signed-off-by: Tom Rini &lt;trini@konsulko.com&gt;
</content>
</entry>
</feed>
