bcm63xx/u-boot/configs/ls1043aqds_nand_defconfig, branch masterBroadcom-s U-Boothttps://git.openwrt.org/project/bcm63xx/u-boot/atom?h=master2019-06-14T20:10:49Zconfigs: Migrate the various SPL_BOOT_xxx choices for PowerPC2019-06-14T20:10:49ZTom Rini2019-06-01T18:20:25Zurn:sha1:db4080d56dec857a90367e2d5e4fa0ad0d2a37c3
The non-CONFIG_SPL_FRAMEWORK SPL used on some PowerPC platforms have a
choice between CONFIG_SPL_NAND_BOOT, CONFIG_SPL_MMC_BOOT and
CONFIG_SPL_SPI_BOOT. Migrate this to Kconfig
Signed-off-by: Tom Rini <trini@konsulko.com>
configs: Migrate CONFIG_FMAN_ENET and some related options to Kconfig2019-05-26T18:40:50ZTom Rini2019-05-12T11:59:12Zurn:sha1:cc1e98b559e46630c3421a7762d02a58e5480926
Move the main symbol for Freescale Fman Ethernet controller option to
Kconfig. Also migrate the CONFIG_SYS_QE_FMAN_FW_IN_xxx macros and
rename the SPIFLASH one to follow the same format as all of the others.
To do this fully we need to migrate CONFIG_QC, do so.
Signed-off-by: Tom Rini <trini@konsulko.com>
configs: move CONFIG_SPL_TEXT_BASE to Kconfig2019-04-30T01:41:40ZSimon Goldschmidt2018-09-30T12:31:53Zurn:sha1:f89d6133eef2e068f9c33853b6584d7fcbfa9d2e
Moved CONFIG_SPL_TEXT_BASE to common/spl/Kconfig and migrate existing
values.
Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
[trini: Re-run migration]
Signed-off-by: Tom Rini <trini@konsulko.com>
configs: Resync with savedefconfig2019-04-30T01:41:40ZTom Rini2019-04-29T19:54:04Zurn:sha1:d168bcb6fe39108042c0c771f0823a95346a8e7e
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini <trini@konsulko.com>
Convert CONFIG_SF_DEFAULT_* to Kconfig2019-03-25T21:36:53ZPatrick Delaunay2019-02-27T14:20:36Zurn:sha1:14453fbfadc2f98ca35d6033140466c7a4b4947a
This converts the following to Kconfig:
CONFIG_SF_DEFAULT_BUS
CONFIG_SF_DEFAULT_CS
CONFIG_SF_DEFAULT_MODE
CONFIG_SF_DEFAULT_SPEED
I use moveconfig script and then manual check on generated u-boot.cfg
to solve the remaining issue.
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
board: ls1043a: enable EFI_LOADER_BOUNCE_BUFFER2019-03-03T15:26:00ZMian Yousaf Kaukab2019-01-29T15:38:39Zurn:sha1:c504b0d62c6d41a074caa3c9801cae135557f3d3
EFI applications need bounce buffers to work properly on these
platforms.
Signed-off-by: Mian Yousaf Kaukab <ykaukab@suse.de>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
configs: ls1043aqds: enable sata configs for all ls1043aqds defconfigs2019-02-19T04:56:44ZPeng Ma2019-01-30T11:13:32Zurn:sha1:0833d954ced41d55f5c5ef4a869103e952437634
Add CONFIG_AHCI CONFIG_SATA_CEVA CONFIG_DM_SCSI for some ls1043aqds
defconfigs that missing one of them or more.
Support sata for all ls1043aqds defconfigs
Signed-off-by: Peng Ma <peng.ma@nxp.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
configs: Resync with savedefconfig2019-01-07T23:11:00ZTom Rini2019-01-07T22:46:19Zurn:sha1:1bac199e8c876c37f31adeb23a75ae1ca12aea7f
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini <trini@konsulko.com>
Convert CONFIG_FLASH_CFI_DRIVER et al to Kconfig2018-10-19T23:19:50ZAdam Ford2018-10-14T20:10:50Zurn:sha1:2fe88d452268d61b5ca9cb0b1dda2974cc43faeb
This converts the following to Kconfig:
CONFIG_FLASH_CFI_DRIVER
CONFIG_SYS_FLASH_USE_BUFFER_WRITE
CONFIG_FLASH_CFI_MTD
CONFIG_SYS_FLASH_PROTECTION
CONFIG_SYS_FLASH_CFI
Signed-off-by: Adam Ford <aford173@gmail.com>
[trini: Re-migrate]
Signed-off-by: Tom Rini <trini@konsulko.com>
Enable CONFIG_BLK and CONFIG_DM_MMC to Kconfig2018-09-27T15:51:49ZYinbo Zhu2018-09-25T06:47:13Zurn:sha1:32284f638f23935f4de63e3048297e0a40b26964
This enables the folowing to Kconfig:
CONFIG_BLK
CONFIG_DM_MMC
Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>