bcm63xx/u-boot/configs/mx6sabreauto_defconfig, branch master

mx6sabreauto: Enable SPL SDP support

2019-06-11T08:43:00Z

To allow loading u-boot over USB enable SDP support in the SPL. Signed-off-by: Sjoerd Simons Reviewed-by: Fabio Estevam

mx6sabreauto: Remove CONFIG_SPL_DM to decrease the SPL size

2019-06-11T08:43:00Z

The i.mx6 SPL binary cannot be bigger then 68K, while with the current defconfig for sabreauto it's only about 56K as soon as USB support gets added the size will overflows. Signed-off-by: Sjoerd Simons Reviewed-by: Fabio Estevam

mx6sabreauto: set SYS_MALLOC_F for video

2019-06-11T08:43:00Z

Sabre Auto boards currently hang with: ``` U-Boot 2019.07-rc3-00057-gc41940c406 (Jun 03 2019 - 14:42:41 +0200) CPU: Freescale i.MX6QP rev1.0 996 MHz (running at 792 MHz) CPU: Automotive temperature grade (-40C to 125C)Reset cause: WDOG Model: Freescale i.MX6 Quad Plus SABRE Automotive Board Board: MX6Q-Sabreauto revA I2C: ready DRAM: 2 GiB Video device 'ipu@2400000' cannot allocate frame buffer memory -ensure the device is set up before relocation Error binding driver 'ipuv3_video': -28 Video device 'ipu@2800000' cannot allocate frame buffer memory -ensure the device is set up before relocation Error binding driver 'ipuv3_video': -28 Some drivers failed to bind Error binding driver 'generic_simple_bus': -28 Some drivers failed to bind initcall sequence 8ffe00b8 failed at call 1780e93b (err=-28) ``` Set SYS_MALLOC_F_LEN to reserve_video to work. This is similar to the change Peng Fan did for mx6sabresd (9002e735e717) Signed-off-by: Sjoerd Simons Reviewed-by: Peng Fan

mx6sabreauto: Select pinctrl driver

2019-06-11T08:43:00Z

With the conversion to DM we should select the pinctrl driver. Signed-off-by: Sjoerd Simons Reviewed-by: Peng Fan

configs: move CONFIG_SPL_TEXT_BASE to Kconfig

2019-04-30T01:41:40Z

Moved CONFIG_SPL_TEXT_BASE to common/spl/Kconfig and migrate existing values. Signed-off-by: Simon Goldschmidt [trini: Re-run migration] Signed-off-by: Tom Rini

configs: Resync with savedefconfig

2019-04-30T01:41:40Z

Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini

mx6sabreauto: convert to DM_VIDEO

2019-04-13T18:30:09Z

Enable DM_VIDEO in defconfig. Signed-off-by: Anatolij Gustschin

imx: move CONFIG_VIDEO_IPUV3 to defconfigs

2019-04-13T18:30:09Z

Signed-off-by: Anatolij Gustschin

Convert CONFIG_SF_DEFAULT_* to Kconfig

2019-03-25T21:36:53Z

This converts the following to Kconfig: CONFIG_SF_DEFAULT_BUS CONFIG_SF_DEFAULT_CS CONFIG_SF_DEFAULT_MODE CONFIG_SF_DEFAULT_SPEED I use moveconfig script and then manual check on generated u-boot.cfg to solve the remaining issue. Signed-off-by: Patrick Delaunay

configs: mx6sabreauto: Add DM_SPI_FLASH necessary configs

2019-02-15T21:01:15Z

Enable all neceassary configs to support DM_SPI_FLASH on mx6sabreauto. Signed-off-by: Abel Vesa Reviewed-by: Peng Fan Reviewed-by: Fabio Estevam