bcm63xx/u-boot/configs/odroid-c2_defconfig, branch masterBroadcom-s U-Boothttps://git.openwrt.org/project/bcm63xx/u-boot/atom?h=master2019-04-30T01:41:40Zconfigs: Resync with savedefconfig2019-04-30T01:41:40ZTom Rini2019-04-29T19:54:04Zurn:sha1:d168bcb6fe39108042c0c771f0823a95346a8e7e
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini <trini@konsulko.com>
board: amlogic: enable PHY_REALTEK for selected boards2019-04-23T09:19:49ZNeil Armstrong2019-04-10T14:41:30Zurn:sha1:d714a5be8d570290095592d6663d3af8c3abab65
When using the generic PHY on boards using an RGMII Realtek PHY,
gigabit speed is not always reliable.
This patch enables the Realtek PHY driver for such boards.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
ARM: meson: display Amlogic SoC Information2019-04-10T14:48:31ZJulien Masson2019-03-25T10:55:29Zurn:sha1:f41d723b9fa59d6fac27f51254742dfbf2d7eea0
The Amlogic SoCs have a registers containing the die revision
and packaging type to determine the SoC family and package marketing
name like S905X for the GXL SoC Family.
This code is taken from the Linux meson-gx-socinfo driver and adapted
to U-Boot printing.
Signed-off-by: Julien Masson <jmasson@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
[narmstrong: also updated new p200/p201 defconfigs]
configs: Resync with savedefconfig2019-02-07T19:53:03ZTom Rini2019-02-07T19:53:03Zurn:sha1:7ae2729401bb9cd6bbe233c12a1d0a3404221659
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini <trini@konsulko.com>
arm: meson64: enable console mux and console env by default2019-01-31T08:35:01ZMaxime Jourdan2018-12-20T14:09:12Zurn:sha1:01790b016ec744ec3b1f13f9fdb24417b3168879
With the recent addition of the meson VPU driver, enable the following
config entries by default for meson-64 targets: CONFIG_CONSOLE_MUX,
CONFIG_SYS_CONSOLE_IS_IN_ENV.
This allows outputting the console via video if CONFIG_VIDEO_MESON is
selected.
Signed-off-by: Maxime Jourdan <mjourdan@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Anatolij Gustschin <agust@denx.de>
configs: Resync with savedefconfig2019-01-07T23:11:00ZTom Rini2019-01-07T22:46:19Zurn:sha1:1bac199e8c876c37f31adeb23a75ae1ca12aea7f
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini <trini@konsulko.com>
ARM: rework amlogic configuration2018-11-26T13:40:52ZJerome Brunet2018-10-25T14:41:37Zurn:sha1:96a739b4608dfa6e575b17290d25d7b7c525d517
Rework the board SYS_BOARD, SYS_VENDOR and SYS_CONFIG_NAME setup by moving
the board Kconfig into the mach-meson Kconfig to make it easier to add
new boards for a SoC architecture and add a custom config header or custom
board handler for a platform.
This drops the board CONFIGs and the duplicate boards configs headers in
favor of a single meson64.h config header.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
configs: Resync with savedefconfig2018-09-03T19:26:12ZTom Rini2018-09-03T19:26:12Zurn:sha1:8c5cad05c97122b33ef8de981b56f701d6bfb6ea
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini <trini@konsulko.com>
Convert CONFIG_MISC_INIT_R to Kconfig2018-08-17T17:04:00ZAdam Ford2018-07-29T18:13:29Zurn:sha1:8ccf98b1cfd2811e3121c719e294bdd8ebab1c45
This converts the following to Kconfig:
CONFIG_MISC_INIT_R
Signed-off-by: Adam Ford <aford173@gmail.com>
[trini: Update the defaults logic slightly]
Signed-off-by: Tom Rini <trini@konsulko.com>
configs: Migrate CONFIG_NR_DRAM_BANKS2018-08-16T20:45:02ZTom Rini2018-08-16T12:16:24Zurn:sha1:86cf1c82850f7c226f23684e19616e526ffaf10f
We have the following cases:
- CONFIG_NR_DRAM_BANKS was defined, migrate normally
- CONFIG_NR_DRAM_BANKS_MAX was defined and then used for
CONFIG_NR_DRAM_BANKS after a check, just migrate it over now.
- CONFIG_NR_DRAM_BANKS was very oddly defined on p2771-0000-* (to 1024 +
2), set this to 8.
Signed-off-by: Tom Rini <trini@konsulko.com>