Broadcom-s U-Boot https://git.openwrt.org/project/bcm63xx/u-boot/atom?h=master 2019-04-30T01:41:40Z 2019-04-30T01:41:40Z Simon Goldschmidt 2018-09-30T12:31:53Z urn:sha1:f89d6133eef2e068f9c33853b6584d7fcbfa9d2e Moved CONFIG_SPL_TEXT_BASE to common/spl/Kconfig and migrate existing values. Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> [trini: Re-run migration] Signed-off-by: Tom Rini <trini@konsulko.com> 2019-04-30T01:41:40Z Tom Rini 2019-04-29T19:54:04Z urn:sha1:d168bcb6fe39108042c0c771f0823a95346a8e7e Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com> 2019-04-10T10:04:32Z Paul Kocialkowski 2019-03-14T10:36:16Z urn:sha1:9d0f9e837421c3e6d1e99caed401511d886a1c36 Most of the boards we support with H3/H5 enable DRAM on-die termination, which is consistent with the high DRAM clocks that are used. Make it the default (like it's done for other similar platforms) instead of defining it in each defconfig. Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Reviewed-by: Jagan Teki <jagan@openedev.com> 2019-04-10T10:04:32Z Paul Kocialkowski 2019-03-14T10:36:15Z urn:sha1:882b71e47df2889c77105ddcfe34cbafa762a208 Most H3/H5 boards we support have the DRAM ZQ value set to 3881979, which is also consistent with the default set for the R40. Make this value the default on H3/H5 instead of 123. Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Reviewed-by: Jagan Teki <jagan@openedev.com> 2019-02-07T19:53:03Z Tom Rini 2019-02-07T19:53:03Z urn:sha1:7ae2729401bb9cd6bbe233c12a1d0a3404221659 Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com> 2019-01-18T16:49:09Z Jagan Teki 2018-12-22T12:48:10Z urn:sha1:29d280c88a1ff331dce2d4c7a5aaf2402aa0fd8a Onc of key blocker for using USB Generic host controller drivers in Allwinner are CLK and RESET drivers, now these available for USB usage. So switch sunxi USB use EHCI and OHCI Generic controllers. Enabling USB is wisely a board choise, So Enable USB_OHCI_HCD where it already have USB_EHCI_HCD Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> 2018-09-03T19:26:12Z Tom Rini 2018-09-03T19:26:12Z urn:sha1:8c5cad05c97122b33ef8de981b56f701d6bfb6ea Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com> 2018-08-16T20:45:02Z Tom Rini 2018-08-16T12:16:24Z urn:sha1:86cf1c82850f7c226f23684e19616e526ffaf10f We have the following cases: - CONFIG_NR_DRAM_BANKS was defined, migrate normally - CONFIG_NR_DRAM_BANKS_MAX was defined and then used for CONFIG_NR_DRAM_BANKS after a check, just migrate it over now. - CONFIG_NR_DRAM_BANKS was very oddly defined on p2771-0000-* (to 1024 + 2), set this to 8. Signed-off-by: Tom Rini <trini@konsulko.com> 2018-04-08T00:37:13Z Tom Rini 2018-04-08T00:27:54Z urn:sha1:c9542eae0bf815e8196dd9238c38290de173725a Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com> 2018-03-14T05:15:37Z Andre Przywara 2018-03-03T23:49:02Z urn:sha1:341c05865478e259c1c9d889c74c43dcd5192cc0 Commit 278b90ce786f ("configs: Migrate CONFIG_SYS_TEXT_BASE") made CONFIG_SYS_TEXT_BASE a proper Kconfig variable, with the consequence of moving the common definition shared by almost every sunxi board into 123 individual defconfig files. But the U-Boot start address for Allwinner boards is a platform decision which has been around for ages, so defining it in each *board* config file seems a bit over the top. Define the standard values (160MB into DRAM for most SoCs, with two SoC exceptions) if ARCH_SUNXI is selected, and delete the lines from the individual defconfigs. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Reviewed-by: Jagan Teki <jagan@openedev.com>