bcm63xx/u-boot/configs/pepper_defconfig, branch masterBroadcom-s U-Boothttps://git.openwrt.org/project/bcm63xx/u-boot/atom?h=master2019-02-01T14:14:21Zspl: Kconfig: Replace CONFIG_SPL_EXT_SUPPORT to CONFIG_SPL_FS_EXT42019-02-01T14:14:21ZTien Fong Chee2019-01-23T06:20:05Zurn:sha1:f4b409247429affe078a2c42d4c21d90ed2855e4
Replace CONFIG_SPL_EXT_SUPPORT to CONFIG_SPLY_FS_EXT4 so both
obj-$(CONFIG_$(SPL_)FS_EXT4) and CONFIG_IS_ENABLED(FS_EXT4) can be
used to control the build in both SPL and U-Boot.
Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
spl: Kconfig: Replace CONFIG_SPL_FAT_SUPPORT with CONFIG_SPL_FS_FAT2019-02-01T14:12:48ZTien Fong Chee2019-01-23T06:20:03Zurn:sha1:0c3a9ed409a5efac27df762acb2af6271675b07d
Replace CONFIG_SPL_FAT_SUPPORT with CONFIG_SPL_FS_FAT so
obj-$(CONFIG_$(SPL_)FS_FAT) can be used to control the build in both
SPL and U-Boot.
Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
configs: Resync with savedefconfig2019-01-07T23:11:00ZTom Rini2019-01-07T22:46:19Zurn:sha1:1bac199e8c876c37f31adeb23a75ae1ca12aea7f
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini <trini@konsulko.com>
configs: Resync with savedefconfig2018-11-14T00:44:53ZTom Rini2018-11-14T00:44:53Zurn:sha1:4114a2614b0b7e3f147e2903a8e1d498c4cfb4ba
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini <trini@konsulko.com>
Convert CONFIG_MII et al to Kconfig2018-08-17T17:03:54ZAdam Ford2018-07-21T04:03:57Zurn:sha1:d7869b2183d2b786e5410b97a5a6b2e630e7825e
This converts the following to Kconfig:
CONFIG_MII
CONFIG_DRIVER_TI_EMAC
Signed-off-by: Adam Ford <aford173@gmail.com>
Acked-by: Jagan Teki <jagan@amarulasolutions.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
configs: Resync with savedefconfig2018-06-04T15:57:37ZTom Rini2018-06-04T15:57:37Zurn:sha1:358b6a20e4428f1834dc96aff14077d43e9cd190
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini <trini@konsulko.com>
Convert CONFIG_SPI to Kconfig2018-04-27T18:54:11ZAdam Ford2018-04-15T17:51:26Zurn:sha1:f1b1f77060beadbfe9f42a3be00019bd025afbd6
This converts the following to Kconfig:
CONFIG_SPI
This partly involves updating code that assumes that CONFIG_SPI implies
things that are specific to the MPC8xx SPI driver. For now, just update
the CONFIG tests. This also involves reworking the default for
CONFIG_SYS_DEF_EEPROM_ADDR so that we don't set it when we cannot make a
reasonable default, as it does not cause any compile failures.
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
configs: Resync with savedefconfig2018-04-17T14:10:47ZTom Rini2018-04-17T13:22:31Zurn:sha1:34b3722e381c0146b4aa7fea3a5243c588b8ed2f
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini <trini@konsulko.com>
net: phy: Don't limit phy addresses by default2018-04-13T20:56:47ZJoe Hershberger2018-03-30T16:52:16Zurn:sha1:16879cd25a4089cde2f3393fb09567df53402679
Some boards expect to find more than one phy while other boards are old
and need to be limited to a specific phy address. Only limit the phy
address for boards that opt in.
Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Migrate CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG to Kconfig2018-04-09T03:05:58ZAlex Kiernan2018-04-01T16:37:53Zurn:sha1:d91013034a3222137a5ac4d82aa45f15bd6ff284
Convert CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG to Kconfig
Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Petr Vorel <petr.vorel@gmail.com>
Reviewed-by: Petr Vorel <petr.vorel at gmail.com>