bcm63xx/u-boot/configs/poplar_defconfig, branch masterBroadcom-s U-Boothttps://git.openwrt.org/project/bcm63xx/u-boot/atom?h=master2019-07-01T13:35:56Zpoplar: increase SYS_MALLOC_F_LEN for DM_FLAG_PRE_RELOC support2019-07-01T13:35:56ZShawn Guo2019-06-17T03:08:34Zurn:sha1:8c2d42d526574a6d972d7711660b652d2aeba7e1
There is a regression seen on Poplar platform, which doesn't even show
a U-Boot version banner on booting. It turns out that due to landing
of commit 3a7c45f6a772 ("simple-bus: add DM_FLAG_PRE_RELOC flag to
simple-bus driver"), we need to increase SYS_MALLOC_F_LEN from its
default size 0x400, as pre-relocation requires more memory there. Let's
increase SYS_MALLOC_F_LEN to 0x4000 to fix the regression.
Thanks to Andreas Färber <afaerber@suse.de> for reporting, and Bin Meng
<bmeng.cn@gmail.com> for trouble shooting.
Reported-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Andreas Färber <afaerber@suse.de>
configs: Resync with savedefconfig2019-04-30T01:41:40ZTom Rini2019-04-29T19:54:04Zurn:sha1:d168bcb6fe39108042c0c771f0823a95346a8e7e
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini <trini@konsulko.com>
poplar: enable Ethernet driver support2019-04-23T21:57:25ZShawn Guo2019-03-20T07:32:41Zurn:sha1:7c798a11d499dbf5c1c12eedec6bd7299b906b2b
The 'phy' reset of gmac device in kernel device tree is not generic
enough for u-boot to use, so we need to overwrite the 'resets' property
as needed. With this device tree fixup and poplar_defconfig changes,
Ethernet starts working on Poplar board.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
mmc: Convert HI6220 MMC driver to driver model2019-01-15T20:28:10ZManivannan Sadhasivam2018-12-27T13:34:04Zurn:sha1:6240e64f92085f6e8950d938a0103281ad4f5ab2
Convert HiSilicon HI6220 MMC driver based on DWMMC IP to driver
model.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
[trini: Enable this on poplar]
Signed-off-by: Tom Rini <trini@konsulko.com>
poplar_defconfig: enable fastboot support2019-01-14T22:43:18ZShawn Guo2018-12-18T09:52:07Zurn:sha1:37cbd8918c83c9b160e79c3b79f3521cd8f73537
It enables fastboot support on Poplar board by using DWC2 OTG gadget
driver.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
configs: Resync with savedefconfig2019-01-07T23:11:00ZTom Rini2019-01-07T22:46:19Zurn:sha1:1bac199e8c876c37f31adeb23a75ae1ca12aea7f
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini <trini@konsulko.com>
configs: Resync with savedefconfig2018-09-03T19:26:12ZTom Rini2018-09-03T19:26:12Zurn:sha1:8c5cad05c97122b33ef8de981b56f701d6bfb6ea
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini <trini@konsulko.com>
configs: Migrate CONFIG_NR_DRAM_BANKS2018-08-16T20:45:02ZTom Rini2018-08-16T12:16:24Zurn:sha1:86cf1c82850f7c226f23684e19616e526ffaf10f
We have the following cases:
- CONFIG_NR_DRAM_BANKS was defined, migrate normally
- CONFIG_NR_DRAM_BANKS_MAX was defined and then used for
CONFIG_NR_DRAM_BANKS after a check, just migrate it over now.
- CONFIG_NR_DRAM_BANKS was very oddly defined on p2771-0000-* (to 1024 +
2), set this to 8.
Signed-off-by: Tom Rini <trini@konsulko.com>
configs: Migrate CONFIG_SYS_TEXT_BASE2018-02-11T14:30:09ZTom Rini2018-02-03T17:10:38Zurn:sha1:278b90ce786f73faf29aa522d5d101e1da006378
On the NIOS2 and Xtensa architectures, we do not have
CONFIG_SYS_TEXT_BASE set. This is a strict migration of the current
values into the defconfig and removing them from the headers.
I did not attempt to add more default values in and for now will leave
that to maintainers.
Signed-off-by: Tom Rini <trini@konsulko.com>
configs: Resync with savedefconfig2018-02-11T01:29:02ZTom Rini2018-02-11T01:27:45Zurn:sha1:7c8f00e484658c673d32d8422c96cb64bb571063
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini <trini@konsulko.com>