bcm63xx/u-boot/configs/topic_miamiplus_defconfig, branch master

configs: Migrate CONFIG_SYS_LDSCRIPT to Kconfig

2019-06-14T20:10:49Z

In order to migrate this symbol to Kconfig introduce a new symbol to guard it, CONFIG_SYS_CUSTOM_LDSCRIPT. When that is set we can then provide the exact final location o the script. Signed-off-by: Tom Rini

configs: Resync with savedefconfig

2019-05-26T18:45:25Z

Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini

CONFIG_SPL_SYS_[DI]CACHE_OFF: add

2019-05-18T12:15:35Z

While converting CONFIG_SYS_[DI]CACHE_OFF to Kconfig, there are instances where these configuration items are conditional on SPL. This commit adds SPL variants of these configuration items, uses CONFIG_IS_ENABLED(), and updates the configurations as required. Acked-by: Alexey Brodkin Signed-off-by: Trevor Woerner [trini: Make the default depend on the setting for full U-Boot, update more zynq hardware] Signed-off-by: Tom Rini

configs: Resync with savedefconfig

2019-04-30T01:41:40Z

Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini

Convert CONFIG_SF_DEFAULT_* to Kconfig

2019-03-25T21:36:53Z

This converts the following to Kconfig: CONFIG_SF_DEFAULT_BUS CONFIG_SF_DEFAULT_CS CONFIG_SF_DEFAULT_MODE CONFIG_SF_DEFAULT_SPEED I use moveconfig script and then manual check on generated u-boot.cfg to solve the remaining issue. Signed-off-by: Patrick Delaunay

ARM: zynq: Run distribution boot commands first

2019-02-14T13:31:09Z

This patch is doing two things. 1. Exchanging order of boot commands. distro_bootcmd is run first followed by Xilinx boot command. 2. Remove CONFIG_BOOTCOMMAND from configs (and follow mainline) by creating Xilinx distribution bootcommand and wiring it as the last bootcommand. QSPI, NAND distribution boot command will be added later. Signed-off-by: Michal Simek

configs: Don't use SPI_FLASH_BAR as default

2019-02-07T10:03:22Z

Now that new SPI NOR layer uses stateless 4 byte opcodes by default, don't enable SPI_FLASH_BAR. For SPI controllers that cannot support 4-byte addressing, (stm32_qspi.c, fsl_qspi.c, mtk_qspi.c, ich.c, renesas_rpc_spi.c) add an imply clause to enable SPI_FLASH_BAR so as to not break functionality. Signed-off-by: Vignesh R Tested-by: Simon Goldschmidt Tested-by: Stefan Roese Tested-by: Horatiu Vultur Reviewed-by: Jagan Teki Tested-by: Jagan Teki #zynq-microzed

configs: Remove SF_DUAL_FLASH

2019-02-07T10:03:21Z

SF_DUAL_FLASH claims to enable support for SF_DUAL_STACKED_FLASH and SF_DUAL_PARALLEL_FLASH. But, in current U-Boot code, grepping for above enums yield no user and therefore support seems to be incomplete. Remove these configs so as to avoid confusion. Signed-off-by: Vignesh R Reviewed-by: Jagan Teki Tested-by: Jagan Teki #zynq-microzed

ARM: zynq: Convert Topic Miami to DM_I2C

2019-01-24T09:03:45Z

Both boards have only controllers enabled that's why move to DM_I2C is easy. Signed-off-by: Michal Simek

configs: Resync with savedefconfig

2019-01-07T23:11:00Z

Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini