bcm63xx/u-boot/doc/device-tree-bindings/leds, branch masterBroadcom-s U-Boothttps://git.openwrt.org/project/bcm63xx/u-boot/atom?h=master2019-04-22T22:13:24Zled: add initial support for bcm68582019-04-22T22:13:24ZPhilippe Reynes2019-03-22T16:02:01Zurn:sha1:d00c6a2d5634eeb58d15746fce8ddc4cfc76eaee
The driver add the support of the led IP on bcm6858.
This led IP can drive up to 32 leds, and can handle
blinking.
Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
dm: led: add BCM6358 led driver2017-05-10T14:16:09ZÁlvaro Fernández Rojas2017-05-07T18:11:30Zurn:sha1:632889cfe5205b68b2d0fc597011adb051bd938b
This driver is a simplified version of linux/drivers/leds/leds-bcm6358.c
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
dm: led: add BCM6328 led driver2017-05-10T14:16:09ZÁlvaro Fernández Rojas2017-05-07T18:10:24Zurn:sha1:28300dc5263b26365d8210b92d8acf097dc5e942
This driver is a simplified version of linux/drivers/leds/leds-bcm6328.c,
simplified to remove HW leds and blink fallbacks.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
dm: led: Add a driver for GPIO-controlled LEDs2015-07-21T23:39:24ZSimon Glass2015-06-23T21:38:46Zurn:sha1:5ac76bad2277ed40f2a2112ffab0f156e3b599fb
Add a simple driver which allows use of LEDs attached to GPIOs. The linux
device tree binding is used.
Signed-off-by: Simon Glass <sjg@chromium.org>
dm: Add support for LEDs2015-07-21T23:39:24ZSimon Glass2015-06-23T21:38:45Zurn:sha1:5917112c9e9f7a60062c604b3224bd5713c41f46
Add a simple uclass for LEDs, so that these can be controlled by the device
tree and activated when needed. LEDs are referred to by their label.
This implementation requires a driver for each type of LED (e.g GPIO, I2C).
Signed-off-by: Simon Glass <sjg@chromium.org>