bcm63xx/u-boot/doc/device-tree-bindings/pinctrl, branch master

doc: device-tree-bindings: switch from spi-flash to jedec, spi-nor

2019-04-12T05:24:27Z

Since all DTS files has been switched to "jedec,spi-nor", remove the "spi-flash" compatible from the bindings examples. Signed-off-by: Neil Armstrong Reviewed-by: Simon Goldschmidt Reviewed-by: Rick Chen Reviewed-by: Patrick Delaunay Reviewed-by: Jagan Teki

pinctrl: bcm6838: add pinctrl support

2018-09-22T18:49:59Z

Add pinctrl support for broadcom bcm6838 SoC. Signed-off-by: Philippe Reynes

mvebu: pinctrl: sync compatible string with Linux 4.17-rc4

2018-05-29T06:33:05Z

For pinctrl driver of mvebu, the compatible strings supported are defined differently from Linux version. The patch aligned the compatible string with Linux 4.17-rc4. Signed-off-by: Evan Wang Reviewed-by: Stefan Roese Signed-off-by: Stefan Roese

doc: a37xx: Introduce pinctrl device tree binding

2018-03-30T10:52:48Z

Reviewed-on: http://vgitil04.il.marvell.com:8080/43289 Tested-by: iSoC Platform CI Reviewed-by: Kostya Porotchkin Reviewed-by: Igal Liberman Cc: Simon Glass Cc: Stefan Roese Signed-off-by: Ken Ma Signed-off-by: Stefan Roese

PINCTRL: stm32f7: add pin control driver

2017-03-17T18:15:14Z

This driver uses the same pin control binding as that of linux, binding document of this patch is copied from linux. One addition done is for GPIO input and output mode configuration which was missing. Signed-off-by: Vikas Manocha Reviewed-by: Simon Glass

arm64: mvebu: Add pin control nodes to A8K family DTS files

2016-12-12T08:04:52Z

Add pin control nodes to APN806, CP-master, CP-slave and Armada-7040 and Armada-8040 boards DTS files Signed-off-by: Konstantin Porotchkin Cc: Stefan Roese Cc: Nadav Haklai Cc: Neta Zur Hershkovits Cc: Omri Itach Cc: Igal Liberman Cc: Haim Boot Cc: Hanna Hawa Signed-off-by: Stefan Roese

arm64: mvebu: pinctrl: Add pin control driver for A8K family

2016-12-12T08:04:52Z

Add a DM port of Marvell pin control driver. The A8K SoC family contains several silicone dies interconnected in a single package. Every die is normally equipped with its own pin controller unit. There are 2 pin controllers in A70x0 SoC and 3 in A80x0 SoC. Signed-off-by: Konstantin Porotchkin Reviewed-by: Simon Glass Cc: Simon Glass Cc: Stefan Roese Cc: Nadav Haklai Cc: Neta Zur Hershkovits Cc: Omri Itach Cc: Igal Liberman Cc: Haim Boot Cc: Hanna Hawa Signed-off-by: Stefan Roese

atmel: Bring in at91 pio4 device tree file and bindings

2016-08-15T20:58:04Z

Bring in required device tree file and bindings from Linux. Signed-off-by: Wenyou Yang Reviewed-by: Andreas Bießmann Reviewed-by: Simon Glass

dts: Bring in pinctrl device tree binding

2016-01-22T03:42:34Z

Add this binding file since we now use it in U-Boot. Signed-off-by: Simon Glass

rockchip: Bring in RK3288 device tree file includes and bindings

2015-09-03T03:28:23Z

Bring in required device tree files from Linux. Since mainline Linux is somewhat behind, use the files from the Chromium tree. We can re-sync once further code is acccepted upstream. Signed-off-by: Simon Glass