bcm63xx/u-boot/doc/device-tree-bindings, branch master

doc: Remove duplicated documentation directory

2019-06-20T14:57:08Z

Commit ad7061ed742e ("doc: Move device tree bindings documentation to doc/device-tree-bindings") moved all device tree binding documentation to doc/device-tree-bindings directory. The current U-Boot project still have two documentation directories: - doc/ - Documentation/ Move all documentation and sphinx files to doc directory so all content can be in a common place. Signed-off-by: Breno Lima

Merge tag 'u-boot-stm32-20190523' of https://github.com/pchotard/u-boot

2019-05-24T12:13:27Z

- Add various STM32MP1 fixes for serial, env, clk, board, i2c ... - Add STM32MP1 DDR driver update: These update introduce the DDR interactive mode described in: https://wiki.st.com/stm32mpu/index.php/U-Boot_SPL:_DDR_interactive_mode This mode is used by the CubeMX: DDR tuning tool. https://wiki.st.com/stm32mpu/index.php/STM32CubeMX The DDR interactive mode is NOT activated by default because it increase the SPL size and slow down the boot time (200ms wait added).

m68k: add basic set of devicetrees

2019-05-24T03:14:38Z

This patch adds a basic group of devicetrees, one for each cpu family, including actually just uart and dspi devices, since these are the drivers supporting devicetree (support added in this patch-set). Acked-by: Jagan Teki Signed-off-by: Angelo Dureghello Reviewed-by: Jagan Teki

stm32mp1: ram: update parameter array initialization

2019-05-23T09:38:10Z

Force alignment of the size of parameters array with the expected value in the binding, that allows compilation error when the array size change. Signed-off-by: Patrick Delaunay

stm32mp1: ram: change ddr speed to kHz

2019-05-23T09:38:10Z

Allow fractional support in DDR tools. Signed-off-by: Patrick Delaunay

stm32mp1: update RCC binding after kernel realignment

2019-05-23T09:36:46Z

RCC is no more a mfd and add a complete example and alignment with latest TF-A binding Signed-off-by: Patrick Delaunay

ARM: socfpga: Description on FPGA bitstream type and file name for Arria 10

2019-05-10T20:48:10Z

This patch adds description on properties about file name used for both peripheral bitstream and core bitstream. Signed-off-by: Tien Fong Chee

net: phy: micrel: Use correct skew values on KSZ9021

2019-05-08T22:27:01Z

Commit ff7bd212cb8a ("net: phy: micrel: fix divisor value for KSZ9031 phy skew") fixed the skew value divisor for the KSZ9031, but left the code using the same divisor for the KSZ9021, which is incorrect. The preceding commit c16e69f702b1 ("net: phy: micrel: add documentation for Micrel KSZ90x1 binding") added the DTS documentation for the KSZ90x1, changing it from the equivalent file in the Linux kernel to correctly state that for this part the skew value is set in 120ps steps, whereas the Linux documentation and driver continue to this day to use the incorrect value of 200 that came from the original KSZ9021 datasheet before it was corrected in revision 1.2 (Feb 2014). This commit sorts out the resulting confusion in a consistent way by making the following changes: - Update the documentation to be clear about what the skew values mean, in the same was as for the KSZ9031. - Update the Micrel PHY driver to select the appropriate divisor for both parts. - Adjust all the device trees that state skew values for KSZ9021 PHYs to use values based on 120ps steps instead of 200ps steps. This will result in the same values being programmed into the skew registers as the equivalent device trees in the Linux kernel do, where it incorrectly uses 200ps steps (since that's where all these device trees were copied from). Signed-off-by: James Byrne Acked-by: Joe Hershberger

led: add initial support for bcm6858

2019-04-22T22:13:24Z

The driver add the support of the led IP on bcm6858. This led IP can drive up to 32 leds, and can handle blinking. Signed-off-by: Philippe Reynes Reviewed-by: Daniel Schwierzeck

stm32mp1: add stusb1600 support for DK1 and DK2 board

2019-04-21T08:26:52Z

The DK1 and DK2 boards use the USB Type-C controller STUSB1600. This patch updates: - the device tree to add the I2C node in the DT - the board stm32mp1 to probe this I2C device and use this controller to check cable detection. - the DWC2 driver to support a new dt property "u-boot,force-b-session-valid" which forces B session and device mode; it is a workaround because the VBUS sensing and ID detection isn't available with stusb1600. Signed-off-by: Patrick Delaunay Reviewed-by: Lukasz Majewski