bcm63xx/u-boot/drivers/clk/uniphier, branch master

clk: uniphier: add NAND 200MHz clock

2018-12-29T02:38:38Z

The Denali NAND controller IP needs three clocks: - clk: controller core clock - clk_x: bus interface clock - ecc_clk: clock at which ECC circuitry is run Currently, only the first one (50MHz) is provided. The rest of the two clock ports must be connected to the 200MHz clock line. Add this. Signed-off-by: Masahiro Yamada

SPDX: Convert all of our single license tags to Linux Kernel style

2018-05-07T13:34:12Z

When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini

clk: uniphier: disable SPL_CLK

2018-04-23T15:35:35Z

The last clock consumer in SPL, SD/eMMC driver, gave up using the clock driver. The clock driver is only used in U-Boot proper. Signed-off-by: Masahiro Yamada

clk: uniphier: add ethernet clock control support

2018-04-18T14:42:25Z

Add clock control for ethernet controller on each SoC. Signed-off-by: Kunihiko Hayashi Signed-off-by: Masahiro Yamada

clk: uniphier: add NAND controller clock

2017-10-15T13:32:25Z

This allows the NAND driver to enable clock and get its clock rate. Signed-off-by: Masahiro Yamada

clk: uniphier: add PXs3 clock data

2017-10-15T13:32:25Z

Add basic clock data for Socionext's new SoC PXs3. Signed-off-by: Masahiro Yamada

clk: uniphier: rework for better clock tree structure

2017-10-15T13:32:25Z

U-Boot does not support fancy clock tree structures like the Linux common clock framework. Implement a simple clock tree model at the driver level. With this, the clock data will be simplified. Signed-off-by: Masahiro Yamada

clk: uniphier: add System clock support

2017-08-30T00:07:04Z

Support system clocks for LD4, Pro4, sLD8, Pro5, PXs2/LD6b, LD11, LD20. Signed-off-by: Masahiro Yamada

ARM: uniphier: remove sLD3 SoC support

2017-08-20T14:05:39Z

This SoC is too old. It is difficult to maintain any longer. Signed-off-by: Masahiro Yamada

clk: uniphier: fix unmet direct dependencies warning

2017-08-20T14:05:39Z

Since commit f0776a551764 ("spl: dm: Kconfig: SPL_CLK depends on SPL_DM"), the following warning is displayed: $ make uniphier_v8_defconfig warning: (ARCH_ZYNQ && ARCH_ZYNQMP && STM32F7 && CLK_UNIPHIER) selects SPL_CLK which has unmet direct dependencies (CLK && SPL_DM) While I am here, I am removing the prompt to make it user-unconfigurable option so that "select CLK_UNIPHIER" can be omitted. Signed-off-by: Masahiro Yamada