bcm63xx/u-boot/drivers/power/palmas.c, branch master

power: make most tps drivers and the twl4030 driver compatible with DM_I2C

2018-12-10T05:17:30Z

Those driver are not DM drivers per se (not using the PMIC/regulator framework) and are using the legacy I2C API. Make them compatible with the DM_I2C API. This impacts the following drivers: - palmas (used by am57xx/dra7xx evms) - tps65218 (used by am43xx evms) - tps65217 and tps65910 (used by am335x evms and am335x boneblack vboot) - twl4030 (used by omap3_logicpd) - tps65217 (used by brppt1) - twl6030 Signed-off-by: Jean-Jacques Hiblot Reviewed-by: Tom Rini Reviewed-by: Heiko Schocher

SPDX: Convert all of our single license tags to Linux Kernel style

2018-05-07T13:34:12Z

When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini

palmas: Add support for powering different ldos

2017-09-11T20:19:37Z

It is not necessary that ldo1 is used to power on mmc. So, add support for passing ldo registers for powering on mmc. Reviewed-by: Tom Rini Signed-off-by: Lokesh Vutla

regulator: palmas: Add support for LDO1 regulator to provide 1.8V

2017-08-01T02:58:01Z

Modify palmas_mmc1_poweron_ldo() API to set the voltage based on the voltage parameter passed as argument instead of always setting it to 3.0V. This allows MMC1 to set the LDO1 regulator voltage to 3.3V or 1.8V. 1.8V is required to add support for UHS mode. Signed-off-by: Kishon Vijay Abraham I Signed-off-by: Jean-Jacques Hiblot Reviewed-by: Tom Rini

power: change from meaningless value to error number

2017-01-11T10:40:14Z

'-1' is absolutely meaningless value. This patch changed from meaningless value to error number. Signed-off-by: Jaehoon Chung Reviewed-by: Simon Glass

ARM: OMAP4+: Add support for getting pbias info from board

2016-12-04T18:54:51Z

Palmas driver assumes it is always TPS659xx regulator on all DRA7xx based boards to enable mmc regulator. This is not true always like in case of DRA71x-evm. So get this information based on the board. Signed-off-by: Lokesh Vutla Signed-off-by: Vignesh R Signed-off-by: Nishanth Menon Reviewed-by: Tom Rini [trini: Delete omap4_vmmc_pbias_config from omap_hsmmc.c] Signed-off-by: Tom Rini

ARM: DRA7x/AM57xx: Get rid of CONFIG_AM57XX

2016-12-03T18:21:11Z

CONFIG_AM57XX is just an unnecessary macro that is redundant given So, remove the same instead of spreading through out the u-boot source code and getting in the way to maintain common code for DRA7x family. Acked-by: Andrew F. Davis Signed-off-by: Nishanth Menon Signed-off-by: Lokesh Vutla Reviewed-by: Tom Rini

arm: omap: add support for am57xx devices

2014-12-04T16:04:14Z

just add a few ifdefs around because this device is very similar to dra7xxx. Signed-off-by: Felipe Balbi Reviewed-by: Tom Rini

ARM: OMAP5: Power: Add new function to turn on SMPS10

2013-10-20T21:42:39Z

Add new functionality to turn on SMPS10 regulator. This supplies the VBUS to devices connected to the USB host ports Signed-off-by: Dan Murphy

Add GPL-2.0+ SPDX-License-Identifier to source files

2013-07-24T13:44:38Z

Signed-off-by: Wolfgang Denk [trini: Fixup common/cmd_io.c] Signed-off-by: Tom Rini