bcm63xx/u-boot/drivers/power, branch master

regulator: bd71837: copy the bd71837 pmic driver from NXP imx u-boot

2019-06-11T08:42:48Z

https://source.codeaurora.org/external/imx/uboot-imx cherry picked, styled and merged commits: - MLK-18387 pmic: Add pmic driver for BD71837: e9a3bec2e95a - MLK-18590 pmic: bd71837: Change to use new fdt API: acdc5c297a96 Signed-off-by: Ye Li Signed-off-by: Matti Vaittinen Reviewed-by: Simon Glass

power: pfuze100: Fix off by one error in voltage table handling

2019-06-11T08:42:48Z

The code that sets a regulator by looking up the voltage in a table had an off by one error. vsel_mask is a bitmask, not the number of table entries, so a vsel_mask value of 0x7 indicates there are 8, not 7, entries in the table. Cc: Peng Fan Cc: Jaehoon Chung Signed-off-by: Trent Piepho

Merge tag 'u-boot-stm32-20190412' of https://github.com/patrickdelaunay/u-boot

2019-04-12T19:43:19Z

stm32 patches for v2019.07-rc1 - Add trusted boot with TF-A for stm32mp1 - stm32mp1 dts files sync'ed with Linux version - add STM32MP1 Discovery boards (DK1 and DK2) - add STMFX gpio expander driver - misc improvement for stm3mp1 supports - rename stpmu1 to stpmic1 (official name) - stm32_qspi: move to exec_op (spi nor driver for stm32 mpu and mcu) - add STM32 FMC2 NAND flash controller driver

stpmic1: add NVM update support in fuse command

2019-04-12T14:09:13Z

Add functions to read/update the non volatile memory of STPMIC1 (8 bytes-register at 0xF8 address) and allow access with fuse command (bank=1, word > 0xF8). For example: STM32MP> fuse read 1 0xf8 8 Reading bank 1: Word 0x000000f8: 000000ee 00000092 000000c0 00000002 Word 0x000000fc: 000000f2 00000080 00000002 00000033 Signed-off-by: Patrick Delaunay

pmic: stpmu1: add power switch off support

2019-04-12T14:09:13Z

Add sysreset support, and support power switch off request, needed by poweroff command. Signed-off-by: Patrick Delaunay

stpmic1: update register names

2019-04-12T14:09:13Z

Alignment with STPMIC1 datasheet s/MAIN_CONTROL_REG/MAIN_CR/g s/MASK_RESET_BUCK/BUCKS_MRST_CR/g s/MASK_RESET_LDOS/LDOS_MRST_CR/g s/BUCKX_CTRL_REG/BUCKX_MAIN_CR/g s/VREF_CTRL_REG/REFDDR_MAIN_CR/g s/LDOX_CTRL_REG/LDOX_MAIN_CR/g s/USB_CTRL_REG/BST_SW_CR/g s/STPMIC1_NVM_USER_STATUS_REG/STPMIC1_NVM_SR/g s/STPMIC1_NVM_USER_CONTROL_REG/STPMIC1_NVM_CR/g and update all the associated defines. Signed-off-by: Patrick Delaunay

power: rename stpmu1 to official name stpmic1

2019-04-12T14:09:13Z

Alignment with kernel driver name & binding introduced by https://patchwork.kernel.org/cover/10761943/ to use the final marketing name = STPMIC1. Signed-off-by: Patrick Delaunay Reviewed-by: Lukasz Majewski

power: stpmu1: rename files to stpmic1

2019-04-12T14:09:13Z

Prepare file modification for kernel alignment and rename driver to stpmic1. Signed-off-by: Patrick Delaunay Reviewed-by: Lukasz Majewski

regulator: stpmu1: update buck1 range

2019-04-12T14:09:13Z

SW impact for Rev 1.2 of STPMIC1 in U-Boot: Buck converters output voltage change for Buck1 => Vdd min 0,725 to max 1,5V instead of 0.6V to 1.35V (see STPMIC1 datasheet / chapter 5.3 Buck converters) Signed-off-by: Patrick Delaunay

ARM: dts: dra7: Change pbias voltage to 3.3V

2019-04-12T12:05:56Z

As per recent TRM[1], PBIAS cell on dra7 devices supports 3.3v and not 3.0v as documented earlier. Update PBIAS regulator max voltage and the voltage written in the driver to reflect this. [1] http://www.ti.com/lit/pdf/sprui30 Signed-off-by: Faiz Abbas