bcm63xx/u-boot/drivers/usb/host/Kconfig, branch masterBroadcom-s U-Boothttps://git.openwrt.org/project/bcm63xx/u-boot/atom?h=master2019-05-05T12:48:50Zusb: ohci: ohci-da8xx: Enable da850-ohci driver with DM support2019-05-05T12:48:50ZAdam Ford2019-04-30T10:21:41Zurn:sha1:9da5474389c784474274d8e1d1d04fab924d3c39
This patch reuses some former code for the hawkboard, combines it
with some some similar DM_USB compatible code for the OHCI driver,
and enables the use of the da850's OHCI controller with DM_USB
compatibility.
Signed-off-by: Adam Ford <aford173@gmail.com>
Convert CONFIG_USB_EHCI_MX5 to Kconfig2019-04-25T15:03:25ZLukasz Majewski2019-04-04T10:26:55Zurn:sha1:400b972a7eb7756dcf111990d6d16187c30ae9db
This converts the following to Kconfig:
CONFIG_USB_EHCI_MX5
Signed-off-by: Lukasz Majewski <lukma@denx.de>
configs: move CONFIG_USB_EHCI_VF to Kconfig2019-04-13T18:30:09ZMarcel Ziswiler2019-03-25T16:24:54Zurn:sha1:20df4b570d164675da17bf23998e51271f5a79a3
Move CONFIG_USB_EHCI_VF to drivers/usb/host/Kconfig and update the one
and only user thereof being colibri_vf.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
Kconfig: tegra: Migrate USB_EHCI_TEGRA2019-02-20T16:01:44ZPeter Robinson2019-02-20T12:17:27Zurn:sha1:747fed56d3876d7de89959f9a927901e02166151
Migrate USB_EHCI_TEGRA from headers to Kconfig
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Cc: Tom Warren <twarren@nvidia.com>
Cc: Stephen Warren <swarren@nvidia.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Cc: Peter.Chubb@data61.csiro.au
Cc: Lucas Stach <dev@lynxeye.de>
Cc: Stefan Agner <stefan.agner@toradex.com>
Cc: Alban Bedel <alban.bedel@avionic-design.de>
Cc: Allen Martin <amartin@nvidia.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
sunxi: usb: Switch to Generic host controllers2019-01-18T16:49:09ZJagan Teki2018-12-22T12:48:10Zurn:sha1:29d280c88a1ff331dce2d4c7a5aaf2402aa0fd8a
Onc of key blocker for using USB Generic host controller
drivers in Allwinner are CLK and RESET drivers, now these
available for USB usage.
So switch sunxi USB use EHCI and OHCI Generic controllers.
Enabling USB is wisely a board choise, So Enable USB_OHCI_HCD
where it already have USB_EHCI_HCD
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
ehci: msm: switch to generic PHY uclass2018-09-30T17:00:36ZRamon Fried2018-09-21T10:35:50Zurn:sha1:0ac0b6eb6a9d80945454c810cd7eef26958b217b
All the underlying USB PHY was handled in the ehci driver.
Use the generic phy API instead.
Signed-off-by: Ramon Fried <ramon.fried@gmail.com>
usb: xhci: zynqmp: Remove support for !DM_USB2018-05-18T11:23:15ZMichal Simek2018-05-18T11:15:09Zurn:sha1:d067624c47bf15b9b5b716ae8be510fa1fb615a2
Switch to DM_USB was done and there is no need to keep !DM_USB code in
tree.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
usb: dwc3-of-simple: Add support for DRA7/AM57 platforms.2018-04-21T16:38:56ZJean-Jacques Hiblot2018-04-12T08:41:11Zurn:sha1:cc73ba97c008e96df5799dc37acbb04344fb3ac6
Add the compatibility with "ti,dwc3" and enable it by default if DM_USB
is enabled.
Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
usb: dwc3-of-simple: Fix dependencies2018-04-21T16:38:56ZJean-Jacques Hiblot2018-04-12T08:41:10Zurn:sha1:103774b71cc0e510f890f639f9c3a65ad9d005c9
This simple glue layer does not require CONFIG_MISC, but it does require
CONFIG_DM_USB.
Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
usb: host: Add simple of glue driver for DWC3 USB Controllers integration2018-04-11T15:22:07ZNeil Armstrong2018-04-11T15:08:00Zurn:sha1:ca7fdc8b1267ad0189060c853502761086c8d74a
This is a port of the dwc3-of-simple driver from Linux to enable/deassert
clock and resets of a simple DWC3 Controller HW glue.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>