bcm63xx/u-boot/drivers/usb/host/Makefile, branch master

usb: host: Drop [e-o]hci-sunxi drivers

2019-01-18T16:49:09Z

Now Allwinner platform is all set to use Generic USB controller drivers, so remove the legacy sunxi drivers. Signed-off-by: Jagan Teki Acked-by: Maxime Ripard

usb: host: replace xhci-keystone driver by the generic dwc3 driver

2018-12-14T16:59:09Z

The keystone platforms can use the generic DC3 driver. Removing the keystone-spcecific xchi driver and add the configuration options to enable the generic DWC3 driver on all K2 platforms. Signed-off-by: Jean-Jacques Hiblot Reviewed-by: Tom Rini

usb: Remove CMD_USB dependency for common code

2018-11-26T20:19:03Z

Common USB code is built whenever USB is enabled (in non-SPL builds). The USB uclass is built whenever (SPL_)DM_USB is enabled. Both need to be independent from CMD_USB. Signed-off-by: Sven Schwermer

usb: Introduce CONFIG_SPL_DM_USB

2018-11-26T20:19:03Z

This allows building the SPL without driver model for USB. Since CONFIG_SPL_DM_USB is enabled if and only if CONFIG_DM_USB was enabled before, this patch does not change the build behaviour. Signed-off-by: Sven Schwermer

SPDX: Convert all of our single license tags to Linux Kernel style

2018-05-07T13:34:12Z

When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini

usb: host: Add simple of glue driver for DWC3 USB Controllers integration

2018-04-11T15:22:07Z

This is a port of the dwc3-of-simple driver from Linux to enable/deassert clock and resets of a simple DWC3 Controller HW glue. Signed-off-by: Neil Armstrong

usb: Remove unused ppc4xx EHCI host driver

2018-03-17T02:20:15Z

ppc4xx support was removed some time ago. Lets remove the now unused EHCI driver and all its references for this platform as well. Signed-off-by: Stefan Roese Cc: Heinrich Schuchardt Cc: Marek Vasut

usb: Remove isp116x-hcd support

2018-01-28T03:00:59Z

The isp116x-hcd driver is extremely long unused, so just remove it. Cc: Marek Vasut Signed-off-by: Tom Rini

usb: xhci: Add Renesas R-Car xHCI driver

2017-11-26T01:22:36Z

Add firmware V3, firmware loader and XHCI glue for the Renesas R-Car Gen3 SoCs XHCI controller. Thus far only the R-Car Gen3 R8A7795 ES2.0+ and R8A7796 are supported. Signed-off-by: Marek Vasut Cc: Nobuhiro Iwamatsu Cc: Bin Meng

usb: Drop the EHCI RCar Gen3

2017-10-03T23:50:43Z

Since we use EHCI generic driver on RCar Gen3 , this driver is useless. Remove it. Signed-off-by: Marek Vasut Cc: Nobuhiro Iwamatsu Acked-by: Nobuhiro Iwamatsu Signed-off-by: Nobuhiro Iwamatsu