bcm63xx/u-boot/drivers/watchdog/Kconfig, branch master

watchdog: tangier: Convert to use WDT class

2019-06-22T14:27:13Z

Convert legacy driver to use watchdog class. Signed-off-by: Andy Shevchenko Reviewed-by: Stefan Roese

watchdog: stm32mp: Add watchdog driver

2019-06-06T15:40:16Z

This patch adds IWDG (Independent WatchDoG) support for STM32MP platform. Signed-off-by: Christophe Kerello Signed-off-by: Patrice Chotard Reviewed-by: Stefan Roese

watchdog: Kconfig: Sort entry alphabetically

2019-06-06T15:40:16Z

To make adding new entry easier, sort Kconfig entries in alphabetical order. Signed-off-by: Patrice Chotard Reviewed-by: Stefan Roese

driver: watchdog: add sp805 watchdog support

2019-05-22T06:54:24Z

sp805 is watchdog on some NXP layerscape SoCs, adding it's driver. Configs CONFIG_WDT_SP805, CONFIG_WDT, CONFIG_CMD_WDT needs to be enabled to use it. Signed-off-by: Zhao Qiang Reviewed-by: Prabhakar Kushwaha

Merge tag 'mips-pull-2019-05-03' of git://git.denx.de/u-boot-mips

2019-05-05T00:02:42Z

- mscc: small fixes, enhance network support for Serval, Luton and Ocelot - mt7620: rename arch to more generic name mtmips - mips: pass initrd addresses via DT as physical addresses

mips: rename mach-mt7620 to mach-mtmips

2019-05-03T14:43:11Z

Currently mach-mt7620 contains only support for mt7628. To avoid confusion, rename mach-mt7620 to mach-mtmips, which means MediaTek MIPS platforms. MT7620 and MT7628 should be distinguished by SOC_MT7620 and SOC_MT7628 because they do not share the same lowlevel codes. Dependencies of four drivers are changed to SOC_MT7628 as these drivers are only used by MT7628. Cc: Daniel Schwierzeck Reviewed-by: Stefan Roese Signed-off-by: Weijie Gao

watchdog: Kconfig: update WDT help message

2019-05-03T11:23:17Z

Restart operation never exists and reset operation never makes the watchdog expire immediately but expire_now operation does. Signed-off-by: Patrice Chotard Reviewed-by: Stefan Roese

watchdog: mpc8xx_wdt: Watchdog driver and macros cleanup

2019-04-26T07:16:32Z

With the generic watchdog driver now implemented, this patch removes some legacy stuff from the MPC8xx watchdog driver and its Kconfig integration. CONFIG_MPC8xx_WATCHDOG is completely removed and hw_watchdog_reset() is made static, as the watchdog will now get serviced via the DM infrastructure if enabled via CONFIG_WATCHDOG. Signed-off-by: Stefan Roese Cc: Christophe Leroy

watchdog: Implement generic watchdog_reset() version

2019-04-26T07:16:32Z

This patch tries to implement a generic watchdog_reset() function that can be used by all boards that want to service the watchdog device in U-Boot. This watchdog servicing is enabled via CONFIG_WATCHDOG. Without this approach, new boards or platforms needed to implement a board specific version of this functionality, mostly copy'ing the same code over and over again into their board or platforms code base. With this new generic function, the scattered other functions are now removed to be replaced by the generic one. The new version also enables the configuration of the watchdog timeout via the DT "timeout-sec" property (if enabled via CONFIG_OF_CONTROL). This patch also adds a new flag to the GD flags, to flag that the watchdog is ready to use and adds the pointer to the watchdog device to the GD. This enables us to remove the global "watchdog_dev" variable, which was prone to cause problems because of its potentially very early use in watchdog_reset(), even before the BSS is cleared. Signed-off-by: Stefan Roese Cc: Heiko Schocher Cc: Tom Rini Cc: Michal Simek Cc: "Marek Behún" Cc: Daniel Schwierzeck Cc: Maxim Sloyko Cc: Erik van Luijk Cc: Ryder Lee Cc: Weijie Gao Cc: Simon Glass Cc: "Álvaro Fernández Rojas" Cc: Philippe Reynes Cc: Christophe Leroy Reviewed-by: Michal Simek Tested-by: Michal Simek (on zcu100)

watchdog: orion_wdt: take timeout value in ms

2019-04-12T05:04:18Z

The generic wdt_start API expects to be called with the timeout in milliseconds. Update the orion_wdt driver to accept a timeout in milliseconds and use the clock rate specified in the dts to convert the timeout to an appropriate value for the timer reload register. Signed-off-by: Chris Packham Reviewed-by: Stefan Roese Signed-off-by: Stefan Roese