bcm63xx/u-boot/include/configs/linkit-smart-7688.h, branch master

mips: mt76xx: Use correct timer frequency

2019-02-01T13:12:36Z

Testing has shown that the timer on the MT7688 platforms does not run correctly (too fast timeout). This patch changes CONFIG_SYS_MIPS_TIMER_FREQ from 200MHz to 290MHz which is the correct value, as its also used in Linux. Signed-off-by: Stefan Roese Cc: Daniel Schwierzeck

mips: mt76xx: linkit-smart-7688: Misc updates to dts/config/defconfig

2018-11-18T15:02:23Z

These misc updates include the following changes: - Change baudrate from 57600 to 115200 - Enable MIPS_BOOT_CMDLINE_LEGACY - Enable FIT support - Enable ethernet support - Enable SPI support - Enable GPIO support - Change max image size from 0x40000 to 0x80000 A note about the baudrate change: The original Mediatek U-Boot version used 57600 baud. Lets move to a more common and faster speed of 115200 baud. And remove the "console=" property from the DT as its not needed. Signed-off-by: Stefan Roese Cc: Daniel Schwierzeck

mips: Add LinkIt Smart 7688 support

2018-09-23T12:27:19Z

The LinkIt Smart 7688 modules have a MT7688 SoC with 128 MiB of RAM and 32 MiB of flash (SPI NOR). This patch also includes 2 targets. One is the target that can be programmed into the SPI NOR flash and a 2nd target "xxx-ram" is added to support loading and booting via an already running U-Boot version. This allows easy development and testing without the need to flash the image each time. Signed-off-by: Stefan Roese [fixed and regenerated defconfig files] Signed-off-by: Daniel Schwierzeck