bcm63xx/u-boot/include/configs/warp7.h, branch master

mx7_common: Share configs to skip low level init

2019-06-11T08:42:48Z

Share configs in mx7 to skip low level init if we are in the case where OPTEE is loaded already (maybe by ARM Trusted Firmware) and that most of the low level initialization is already done and that we may/should skip it doing them here. Fix the definition detection with size detection to decide whether to skip it. Signed-off-by: Jun Nie Reviewed-by: Fabio Estevam

Convert CONFIG_SUPPORT_EMMC_BOOT to Kconfig

2019-05-04T17:04:12Z

This converts the following to Kconfig: CONFIG_SUPPORT_EMMC_BOOT As requested by Michal Simek , these boards have no eMMC so CONFIG_SUPPORT_EMMC_BOOT has not been migrated: xilinx_zynqmp_zc1275_revB xilinx_zynqmp_zc1751_xm018_dc4 xilinx_zynqmp_zc1751_xm019_dc5 xilinx_zynqmp_zcu100_revC xilinx_zynqmp_zcu102_rev1_0 xilinx_zynqmp_zcu102_revA xilinx_zynqmp_zcu102_revB xilinx_zynqmp_zcu104_revA xilinx_zynqmp_zcu104_revC xilinx_zynqmp_zcu106_revA xilinx_zynqmp_zcu111_revA Signed-off-by: Alex Kiernan Acked-by: Lukasz Majewski Acked-by: Patrick Delaunay Acked-by: Ramon Fried Reviewed-by: Andy Shevchenko Tested-by: Sébastien Szymanski

warp7: Switch to DM Serial

2019-04-25T17:20:32Z

This commit switches to DM SERIAL for warp7 and warp7_bl33 defconfigs. Signed-off-by: Pierre-Jean Texier Signed-off-by: Joris Offouga Reviewed-by: Fabio Estevam

warp7: Fix dfu_alt_info setting after DM conversion

2019-04-25T17:16:24Z

After DM conversion, U-Boot is larger than 512 KiB, so we need to increase the "size" of the dfu_alt_info setting. Signed-off-by: Pierre-Jean Texier Acked-by: Joris Offouga Reviewed-by: Fabio Estevam

arm: imx7s-warp: Convert to DM PMIC

2019-01-28T19:55:46Z

This patch converts the warp7 and warp7_bl33 board ports over to using the DM PMIC model. Signed-off-by: Bryan O'Donoghue Reviewed-by: Peng Fan Cc: Peng Fan Cc: Fabio Estevam Cc: Stefano Babic

warp7: defconfig: Switch to DM for I2C

2019-01-28T19:55:46Z

This commit switches to DM I2C for warp7 and warp7_bl33 defconfigs. Signed-off-by: Bryan O'Donoghue Reviewed-by: Peng Fan Cc: Peng Fan Cc: Fabio Estevam Cc: Stefano Babic

warp7: include: configs: set skip low level init

2018-10-22T12:37:28Z

If we have defined the OPTEE ram size and not OPTEE means that we are in the case where OPTEE is loaded already (maybe by ARM Trusted Firmware) and that most of the low level initialization is already done and that we may/should skip it doing them here. Signed-off-by: Rui Miguel Silva Signed-off-by: Bryan O'Donoghue Cc: Fabio Estevam Cc: u-boot@lists.denx.de

configs: Migrate CONFIG_NR_DRAM_BANKS

2018-08-16T20:45:02Z

We have the following cases: - CONFIG_NR_DRAM_BANKS was defined, migrate normally - CONFIG_NR_DRAM_BANKS_MAX was defined and then used for CONFIG_NR_DRAM_BANKS after a check, just migrate it over now. - CONFIG_NR_DRAM_BANKS was very oddly defined on p2771-0000-* (to 1024 + 2), set this to 8. Signed-off-by: Tom Rini

SPDX: Convert all of our single license tags to Linux Kernel style

2018-05-07T13:34:12Z

When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini

warp7: Add support for automated secure boot.scr verification

2018-04-26T06:54:18Z

This patch adds support for verifying a signed boot.scr. With this in place it's possible for run-time Linux to update boot.scr to set different variables such as switching between different boot partitions, pointing to different kernels etc and for u-boot to verify these changes via the HAB prior to executing the commands contained in boot.scr. Signed-off-by: Bryan O'Donoghue Tested-by: Breno Lima Reviewed-by: Fabio Estevam