bcm63xx/u-boot/include/dt-bindings/pinctrl, branch master

fdt: update bcm283x device tree sources to Linux 5.1-rc6 state

2019-06-12T10:23:46Z

Updating the bcm283x device tree sources adds the device trees for - Raspberry Pi 3 Model A+ - Raspberry Pi 3 Model B+ - Raspberry Pi Compute Module IO board rev1 - Raspberry Pi Compute Module 3 IO board V3.0 - Raspberry Pi Zero Signed-off-by: Heinrich Schuchardt Signed-off-by: Matthias Brugger

ARM: dts: renesas: Add RZ/A1 platform code

2019-05-07T03:41:32Z

Add platform code and DTs for Renesas RZ/A1 R7S72100 SoC. Distinguishing feature of this SoC is that it has up to 10 MiB of on-SoC static RAM (SRAM). The DTs are imported from Linux 5.0.11, commit d5a2675b207d . Signed-off-by: Marek Vasut Cc: Chris Brandt Cc: Nobuhiro Iwamatsu

arm: dts: k3-am654: Sync IOPAD macros with Linux

2019-05-03T11:30:31Z

Transition to the IOPAD macros as used in Linux in which the pin mux mode is specified using a dedicated parameter while also dropping the related MUX_MODEx macros that are no longer needed. This transition will allow us to keep both Linux and U-Boot DTS in sync more easily. While at it also align the file name of the include file itself and update any references accordingly. Signed-off-by: Andreas Dannenberg Reviewed-by: Lokesh Vutla

Merge tag 'u-boot-imx-20190426' of git://git.denx.de/u-boot-imx

2019-05-01T11:25:51Z

Porting to DM and i.MX8 ------------------------ - warp7 to DM - kp_imx53 to DM - Warnings in DT - MX8QM support - colibri-imx6ull to DM - imx7d-pico to DM - ocotp for MX8

dt-bindings: pinctrl: add i.MX8QM pads definition

2019-04-25T15:03:25Z

Add i.MX8QM pads definition Signed-off-by: Peng Fan

ARM: dts: stm32: Sync DT with v4.20 kernel for stm32h7

2019-04-23T13:31:17Z

Synchronize stm32h7 device tree with kernel v4.20. U-boot DT files and pinctrl bindings are updated, useless nodes are removed and gpio compatible added. Signed-off-by: Patrice Chotard

ARM: dts: stm32: Sync DT with v4.20 kernel for stm32f7

2019-04-23T13:31:06Z

Synchronize stm32f7 device tree with kernel v4.20. All pinctrl bindings are updated. Signed-off-by: Patrice Chotard

pinctrl: at91: add slewrate support for SAM9X60

2019-04-09T06:28:50Z

Add slew rate support for SAM9X60 pin controller. Signed-off-by: Claudiu Beznea

poplar: sync up device tree with kernel 4.20

2019-01-25T17:12:56Z

It adds missing pinctrl headers, updates clock header and sync up Poplar device tree with kernel 4.20 release. Signed-off-by: Shawn Guo

dt-bindings: pinctrl: add i.MX8QXP pads definition

2018-10-22T10:59:01Z

Add i.MX8QXP pads definition Signed-off-by: Peng Fan Reviewed-by: Anatolij Gustschin Cc: Stefano Babic