firmware/qca-wireless, branch main

qcn9074: add Arista C-360 BDF

2026-10-31T10:03:02Z

This adds the Arista C-360 BDF for its QCN9074 card, the 6 GHz radio on PCIe 0 (variant Arista-C360-pcie0), and its QCN9072 card, the 2.4/5/6 GHz radio on PCIe 1 (variant Arista-C360-pcie1), which ath11k drives as a QCN9074. The vendor firmware picks its board data per country at boot (LINK_BOARD_DATA); these are its FCC_CE files, for the US and the EU and the fallback for a country without its own, in the vendor default radio plan: - lib/boarddata/radio3/user/FCC_CE/bdwlan.bab_6G_full (PCIe 0) - lib/boarddata/radio4/user/FCC_CE/bdwlan.baa (PCIe 1) Assisted-by: Claude:claude-opus-5-5 Signed-off-by: Christopher Griffin Link: https://github.com/openwrt/firmware_qca-wireless/pull/176 Signed-off-by: Robert Marko

ipq8074: add Arista C-360 BDF

2026-10-31T10:03:02Z

This adds the Arista C-360 BDF for the integrated IPQ8074 2.4 GHz and 5 GHz radios. The vendor firmware picks its board data per country at boot (LINK_BOARD_DATA); this is its FCC_CE set, for the US and the EU and the fallback for a country without its own, in the vendor default radio plan (6 GHz on the PCIe 0 card, all of 5 GHz here): - lib/boarddata/radio12/user/FCC_CE/bdwlan.b290_2G_5G_full Assisted-by: Claude:claude-opus-5-5 Signed-off-by: Christopher Griffin Link: https://github.com/openwrt/firmware_qca-wireless/pull/176 Signed-off-by: Robert Marko

ipq4019: add Gryphon Guardian BDF

2026-10-29T14:07:27Z

Add BDF for the Gryphon Guardian router, extracted from the vendor firmware: boardData_1_0_IPQ4019_DK04_2G.bin and boardData_1_0_IPQ4019_DK04_5G.bin FileSize: 24324 FileCRC32: 2d4846b5 FileMD5: b22fdc2709d234107966d2ea00e6c3ab BoardNames[0]: 'bus=ahb,bmi-chip-id=0,bmi-board-id=20,variant=Gryphon-Guardian' BoardLength[0]: 12064 BoardCRC32[0]: 825572a6 BoardMD5[0]: ec91be0620de9578cd210b12b18ab057 BoardNames[1]: 'bus=ahb,bmi-chip-id=0,bmi-board-id=21,variant=Gryphon-Guardian' BoardLength[1]: 12064 BoardCRC32[1]: 6cfb4f7c BoardMD5[1]: 5279c10932f18c97827f70a034240c57 Signed-off-by: Koen van Mierlo Link: https://github.com/openwrt/firmware_qca-wireless/pull/188 Signed-off-by: Robert Marko

ipq9574/qcn9074: add Nokia Beacon 10 board files

2026-10-29T14:01:44Z

Add board data from Nokia Beacon 10 stock firmware 3TN00367LJLJ17 for the integrated IPQ9574/QCN5024 2.4 GHz radio and the two PCIe QCN9024 radios using the QCN9074 board format. Package the original bdwlan.b20, bdwlan.ba3 and bdwlan.ba2 payloads unchanged in board-2 containers. Use these calibration variants: - Nokia-Beacon-10 for the AHB 2.4 GHz radio - Nokia-Beacon-10-5G for the PCIe 5 GHz radio - Nokia-Beacon-10-6G for the PCIe 6 GHz radio All three radios report QMI chip-id 0 and board-id 255. The variants select the appropriate board data for each radio. Per-device calibration is supplied separately from ART through NVMEM. Tested all three radio probes, 2.4/5 GHz AP operation and CN country selection on a Nokia Beacon 10. Signed-off-by: Liu Yu Link: https://github.com/openwrt/firmware_qca-wireless/pull/181 Signed-off-by: Robert Marko

ipq6018: add Redmi AX5 JDCloud (RA50) board file

2026-10-29T12:59:42Z

This adds the board file for the Redmi AX5 JDCloud (RA50), which uses the integrated IPQ6018 2.4/5 GHz radio. The board data was extracted from the ART partition of the device (offset 0x1000, size 0x10000) and packed with ath11k-bdencoder using the calibration variant "Redmi-AX5-JDCloud". The matching OpenWrt device support is submitted separately. Signed-off-by: Michael Yang Link: https://github.com/openwrt/firmware_qca-wireless/pull/172 Signed-off-by: Robert Marko

ipq6018: add BDF for Wallys DR6018S

2026-10-25T10:31:29Z

Add board data for the Wallys DR6018S IPQ6018 radio. Signed-off-by: Alan Gao <1226010136@qq.com> Link: https://github.com/openwrt/firmware_qca-wireless/pull/177 Signed-off-by: Robert Marko

ipq9574/qcn9274: add Linksys LN6001 board files

2026-10-19T11:00:55Z

Add board files for Linksys Velop WRT Pro 7 (LN6001/MBE70), derived from the default profiles in the official 1.1.0.01 GPL archive: https://downloads.linksys.com/support/assets/gpl/MBE70WRT_v1.1.0.01.tgz Clear the common and per-PHY fixed-country fields using the matching published layouts and maintain the checksums. Preserve all remaining profile fields, including RF and power tables. The IPQ9574 result matches the existing OpenWrt ath11k_remove_regdomain helper. Retain the QCN9274 regulatory-database entry from linux-firmware 20260910. Tested radio startup and JP country selection on one LN6001. Both calibration files matched the unit's own factory data. No AP was started during this focused country-selection test. Signed-off-by: Satoshi Ikeuchi Link: https://github.com/openwrt/firmware_qca-wireless/pull/162 Signed-off-by: Robert Marko

qcn9074: add BDF for ZTE T5400

2026-10-18T18:49:50Z

Add board data for the external 5 GHz radio in the ZTE T5400. The physical radio package is marked Qualcomm QCN9024 001. It enumerates as PCI 17cb:1104 and is handled by ath11k using the QCN9074 hardware/firmware profile, hence the qcn9074 board file suffix. The 131072-byte board-data payload comes from the stock ZTE T5400 OEM firmware as qcn9000/bdwlan.ba0. The stock payload is used unchanged. ath11k reports QMI board ID 255 for this radio. The board container therefore uses: bus=pci,qmi-chip-id=0,qmi-board-id=255,variant=ZTE-T5400 The board data was tested on a ZTE T5400 with ath11k. The radio initializes successfully and has been validated with AP operation, client association, DHCP and bidirectional network traffic. Source BDF SHA-256: 31dfff604629eb7a058ff827c807fb38bcd8fa9abc0af8d4413510a83bed5d51 ath11k-bdencoder -i board-zte_t5400.qcn9074 FileSize: 131172 FileCRC32: a9f44b68 FileMD5: 8096a266056e9a3067f9981b808f71dd BoardNames[0]: 'bus=pci,qmi-chip-id=0,qmi-board-id=255,variant=ZTE-T5400' BoardLength[0]: 131072 BoardCRC32[0]: 6193af04 BoardMD5[0]: 7c632b4ec30fc505f44a1d2cbe976153 Signed-off-by: Wojciech Zwolinski Link: https://github.com/openwrt/firmware_qca-wireless/pull/153 Signed-off-by: Robert Marko

ipq5018: add BDF for ZTE T5400

2026-10-18T18:49:50Z

Add board data for the integrated IPQ5018 2.4 GHz radio in the ZTE T5400. The 131072-byte board-data payload comes from the stock ZTE T5400 OEM firmware as bdwlan.b24. The stock payload is used unchanged. ath11k reports QMI board ID 255 for this radio. The board container therefore uses: bus=ahb,qmi-chip-id=0,qmi-board-id=255,variant=ZTE-T5400 The board data was tested on a ZTE T5400 with ath11k. The radio initializes successfully and has been validated with AP operation, client association, DHCP and bidirectional network traffic. Source BDF SHA-256: c60bfcd24b04022fce85d8b85adc9a0bda3eb59e54fc20da7644231c797918c6 ath11k-bdencoder -i board-zte_t5400.ipq5018 FileSize: 131172 FileCRC32: c0e72954 FileMD5: 08d2ac65cc45d2f742f5db78b4358a4c BoardNames[0]: 'bus=ahb,qmi-chip-id=0,qmi-board-id=255,variant=ZTE-T5400' BoardLength[0]: 131072 BoardCRC32[0]: 23aba4bc BoardMD5[0]: 81e35e3094b658492552d289522beaea Signed-off-by: Wojciech Zwolinski Link: https://github.com/openwrt/firmware_qca-wireless/pull/153 Signed-off-by: Robert Marko

qcn9074: add BDF for Xunison Exigo Hub D50 5G

2026-10-15T19:25:03Z

Board data for the QCN9074 5 GHz radio of the Xunison Exigo Hub D50 5G (also sold as the Zearts D50 5G). The payload is qcn9000/bdwlan.ba0 from the stock firmware, unmodified. It matches the board_id 0xa0 that the stock device tree assigns to this radio, and it is the file the stock firmware loads at boot. The container carries a single entry for the calibration variant (qmi-board-id 255), matching the other files in this feed. Signed-off-by: Steve Meek Link: https://github.com/openwrt/firmware_qca-wireless/pull/170 Signed-off-by: Robert Marko