luci/modules/luci-mod-network/htdocs/luci-static/resources/tools, branch master

luci-mod-network: correct link bonding setting

2026-07-19T07:37:27Z

netifd only understands packets_per_port which it converts/writes to sysfs packets_per_slave. Also, the value 0 is valid. Closes #8830 Signed-off-by: Paul Donald

luci-mod-network: add auto-negotiation, phy speed and duplex

2026-07-19T07:23:44Z

Some settings that were missing from the device configuration have been added to control auto-negotiation, PHY speed, duplex, and rx/tx pause. If the interface has available Phy links speeds, those values will be used, otherwise, static values will be used, such as 10Mbps half/full. 100Mbps half/full, 1Gbps full, 2.5Gbps full, etc... Signed-off-by: Matheus Sampaio Queiroga

luci-mod-network: add new Switch/VLAN configuration

2026-06-23T14:17:36Z

Register a new "Switch/VLAN config" entry in the Network top-level menu and add the view at view/network/switch-vlan.js. The menu entry is only visible when the network configuration contains either a bridge device with vlan_filtering explicitly enabled or at least one bridge-vlan section (mirroring the implicit enable behaviour of the existing Bridge VLAN filtering dialog). The view itself locates the first such bridge in declaration order, detects configurations that the new view cannot represent (PVID different from the untagged VLAN, duplicate untagged memberships, etc.) and blocks access with an explanatory error in that case. The following shortcomings resulted in an alternative Switch/VLAN view: - To reach the current switch/VLAN config page, one has to click through: Network -> Interfaces -> Devices -> Configure... (the respective switch/bridge) -> Bridge VLAN filtering which - at least for dedicated switches - is not sth. I feel comfortable having to do every time I want to make a basic change. - While ~5 ports might still fit next to each other, starting with 2 figure numbers (at the latest), we end up scrolling horizontally. Finding a higher port to configure on a 24 or 48 port switch inevitably results in plenty of horizontal scrolling, while at the same time you have to memorise which row maps to which VLAN-ID, as those scroll out the moment you start scrolling. - Every port needs to be configured by its own, no way to bulk-conf them, to apply the same VLAN config onto multiple ports (e.g. applying the same tag onto a large number or all ports). - Ports and VLAN-IDs are defined by sole numbers. There's no way to annotate them, e.g. a VLAN ID as "iot" or "mgmt", or a port as e.g. "uplink" or "server-mirko". With the following changes: - Add a dedicated "Switch/VLAN config" entry within the top-level "Network" dropdown (you might remember we already had such for swconfig back then, before it got obsoleted by DSA and conf via vlan aware bridges). - Avoid horizontal scrolling by showing switch ports in multiple rows if not fitting screen width. - Allow selection of multiple ports to configure them all the same way at once. - Introduce labels for ports and VLANs; they're optional annotations and don't serve any functional purpose except hinting the user, hence stored in respective sections within /etc/config/luci. - Visualising which VLANs are assigned to which ports by colour- coding the ports when hovering over configured VLANs. Signed-off-by: Mirko Vogt Co-authored-by: Opus and/or Composer

luci-mod-network: align STP defaults with netifd

2026-03-19T20:29:19Z

Closes #8443 Signed-off-by: Paul Donald

luci-mod: js linting fixes / ES6 treatment

2026-02-16T00:42:57Z

Signed-off-by: Paul Donald

luci-base: poe and PSE details & configuration

2026-01-26T02:40:38Z

Adds PoE/PSE configuration support for modern linux (PSE-PD). This change is based on the PSE-PD backport (from 6.17) and netifd|ubus changes. * Add getPSE() [receive all status information] and hasPSE() [has the device PSE hardware?] * Changes ACL permissions to query network.device status information * Add two new PoE icons (PoE active with link up + link down) for the port status page * Changes port status to show PoE information, next to link information and data transfer. * Add a new tab for PoE/PSE to the device configuration, which will only be displayed if the device supports PSE Signed-off-by: Carlo Szelinsky

luci-mod-network: Correctly encode/decode ech field in HTTPS record

2025-09-29T16:26:09Z

Signed-off-by: Anya Lin

luci-mod-network: Add HTTPS SVCB record en/decoding to DHCP

2025-06-26T15:10:58Z

This was a bit of code golf. Just for fun. Users seem to rely on HTTPS record creation. The HTTPS record handling en/decodes compliant records when tested against the RFC defined vectors, although there may exist edge cases that are not compliant. Escaped character encoding is not implemented (strict mode). Any other arbitrary DNS record creation will be possible via the addition of helper functions in this tools file. Signed-off-by: Paul Donald

luci-mod-network: implement Virtual Routing and Forwarding (VRF) options

2025-06-16T22:08:17Z

VRF in netifd is now in main. See: https://github.com/openwrt/netifd/pull/38/ https://github.com/openwrt/openwrt/commit/15c2ca0a834752cc9505751fc6d2f51861d34dfd VRF netifd management was added to 24.10 in https://github.com/openwrt/openwrt/pull/19125 Signed-off-by: Paul Donald

treewide: vectorise iconography

2025-06-12T16:55:53Z

Clear, crisp, resolution independent vector graphics replace the trusty microscopic PNG. Some minor CSS changes were needed to constrain images in some locations to make sure they don't consume too much space. Iconography taken from Mate desktop theme with minor adjustments: https://github.com/mate-desktop/mate-icon-theme/ Signed-off-by: Paul Donald