device: add support for configuring bonding devices

2021-09-03T12:16:11Z

Supported options: - ports: member devices - policy: bonding policy supported values: - balance-rr - active-backup - balance-xor - broadcast - 802.3ad - balance-tlb - balance-alb - xmit_hash_policy: slave selection tx hash policy supported values: - layer2 - layer2+3 - layer3+4 - encap2+3 - encap3+4 - all_ports_active: allow receiving on inactive ports - min_links: minimum number of active links - ad_actor_system: LACPDU exchange MAC address - ad_actor_sys_prio: LACPDU priority value - ad_select: 802.3ad aggregation logic supported values: - stable - bandwidth - count - lacp_rate: 802.3ad LACPDU packet rate supported values: - slow (every 30 seconds) - fast (every second) - packets_per_port: number of packets before switching ports (balance-rr mode). - lp_interval: number of seconds between sent learning packets - dynamic_lb: distribute traffic according to port load - resend_igmp: number if IGMP membership updates after failover event - num_peer_notif: number of tx unsolicited ARP/NA after failover event - primary: name of the primary port - primary_reselect: primary port reselection policy supported values: - always - better - failure - failover_mac: MAC address selection policy supported values: - none - active - follow - monitor_mode: select ARP or MII link monitor: supported values: - arp - mii - monitor_interval: link monitor update interval (msec) - arp_target: ARP monitor target IP address (list) - arp_all_targets: all targets must be reachable to consider the link valid - arp_validate: ARP validation policy supported values: - none - active - backup - all - filter - filter_active - filter_backup - use_carrier: use carrier status instead of MII ioctl result - updelay: delay before enabling port after MII link up event (msec) - downdelay: delay before disabling port after MII link down event (msec) Signed-off-by: Felix Fietkau

add a route6 example to the dummy network config

2012-06-18T21:41:31Z

add interface alias support

2012-05-23T20:13:43Z

move dns server/search list parsing to interface core to support peerdns=0 + static entries

2012-05-19T21:21:54Z

implement a generic peerdns option to suppress proto handler dns entries

2012-05-19T20:57:21Z

use the dummy pptp proto handler script for testing

2012-05-05T12:43:25Z

add support for configuring static routes

2011-10-19T20:43:14Z

rework and fix hotplug interface handling

2011-10-19T00:36:45Z

apply device settings to simple devices with config specified from the interface section (legacy format compatibility), but only if no other config was provided

2011-10-18T23:32:55Z

add support for alias devices, which are activated based on hotplug events containing the real device name

2011-10-18T18:41:23Z

netifd/config/network, branch master