ipq807x: add support for Netgear RAX120v2

[openwrt/openwrt.git] / package / firmware / ipq-wifi / Makefile

diff --git a/package/firmware/ipq-wifi/Makefile b/package/firmware/ipq-wifi/Makefile
index 906f11ac962ab61528f954fe2dd8d517aafde898..aa1466418ed82dc774d22cc3bdec1e3a3cb91015 100644 (file)
--- a/package/firmware/ipq-wifi/Makefile
+++ b/package/firmware/ipq-wifi/Makefile
@@ -2,18 +2,23 @@ include $(TOPDIR)/rules.mk
 include $(INCLUDE_DIR)/version.mk
 
 PKG_NAME:=ipq-wifi
-PKG_RELEASE:=1
+PKG_RELEASE:=2
+
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_URL=$(PROJECT_GIT)/project/firmware/qca-wireless.git
+PKG_SOURCE_DATE:=2023-06-03
+PKG_SOURCE_VERSION:=cd9c30ca47b8e5388b770c523a7f6b8b969e2f92
+PKG_MIRROR_HASH:=45e623fcc512b514ade0f22e217275536aa8de4afba7dfdb11696482b8fa71a2
+
 PKG_FLAGS:=nonshared
 
 include $(INCLUDE_DIR)/package.mk
 
-define Build/Prepare
-       mkdir -p $(PKG_BUILD_DIR)
-endef
-
 define Build/Compile
 endef
 
+# Use ath10k-bdencoder from https://github.com/qca/qca-swiss-army-knife.git
+# to generate the board-* files here.
 #
 # This is intended to be used on an interim basis until device-specific
 # board data for new devices is available through the upstream compilation
@@ -21,13 +26,24 @@ endef
 # Please send a mail with your device-specific board files upstream.
 # You can find instructions and examples on the linux-wireless wiki:
 # <https://wireless.wiki.kernel.org/en/users/drivers/ath10k/boardfiles>
-#
 
 ALLWIFIBOARDS:= \
-       aruba_ap-303 \
-       avm_fritzrepeater-1200 \
-       linksys_ea8300 \
-       qxwlan_e2600ac
+       buffalo_wxr-5950ax12 \
+       compex_wpq873 \
+       dynalink_dl-wrx36 \
+       edgecore_eap102 \
+       edimax_cax1800 \
+       netgear_rax120v2 \
+       netgear_wax218 \
+       prpl_haze \
+       qnap_301w \
+       redmi_ax6 \
+       wallys_dr40x9 \
+       xiaomi_ax3600 \
+       xiaomi_ax9000 \
+       zte_mf289f \
+       zte_mf287plus \
+       zyxel_nbg7815
 
 ALLWIFIPACKAGES:=$(foreach BOARD,$(ALLWIFIBOARDS),ipq-wifi-$(BOARD))
 
@@ -35,7 +51,7 @@ define Package/ipq-wifi-default
   SUBMENU:=ath10k Board-Specific Overrides
   SECTION:=firmware
   CATEGORY:=Firmware
-  DEPENDS:=@TARGET_ipq40xx
+  DEPENDS:=@(TARGET_ipq40xx||TARGET_ipq806x||TARGET_qualcommax)
   TITLE:=Custom Board
 endef
 
@@ -44,17 +60,28 @@ define ipq-wifi-install-one-to
   $(INSTALL_DATA) $(1) $(2)/lib/firmware/ath10k/$(3)/board-2.bin
 endef
 
-# Note: .bin deprecated; supports existing boards
+define ipq-wifi-install-ath11-one-to
+  $(INSTALL_DIR)  $(2)/lib/firmware/ath11k/$(3)/
+  $(INSTALL_DATA) $(1) $(2)/lib/firmware/ath11k/$(3)/board-2.bin
+endef
 
 define ipq-wifi-install-one
-  $(if $(filter $(suffix $(1)),.QCA4019 .qca4019 .bin),\
+  $(if $(filter $(suffix $(1)),.QCA4019 .qca4019),\
     $(call ipq-wifi-install-one-to,$(1),$(2),QCA4019/hw1.0),\
   $(if $(filter $(suffix $(1)),.QCA9888 .qca9888),\
     $(call ipq-wifi-install-one-to,$(1),$(2),QCA9888/hw2.0),\
+  $(if $(filter $(suffix $(1)),.QCA9889 .qca9889),\
+    $(call ipq-wifi-install-one-to,$(1),$(2),QCA9887/hw1.0),\
   $(if $(filter $(suffix $(1)),.QCA9984 .qca9984),\
     $(call ipq-wifi-install-one-to,$(1),$(2),QCA9984/hw1.0),\
+  $(if $(filter $(suffix $(1)),.QCA99X0 .qca99x0),\
+    $(call ipq-wifi-install-one-to,$(1),$(2),QCA99X0/hw2.0),\
+  $(if $(filter $(suffix $(1)),.IPQ8074 .ipq8074),\
+    $(call ipq-wifi-install-ath11-one-to,$(1),$(2),IPQ8074/hw2.0),\
+  $(if $(filter $(suffix $(1)),.QCN9074 .qcn9074),\
+    $(call ipq-wifi-install-ath11-one-to,$(1),$(2),QCN9074/hw1.0),\
     $(error Unrecognized board-file suffix '$(suffix $(1))' for '$(1)')\
-  )))
+  )))))))
 
 endef
 # Blank line required at end of above define due to foreach context
@@ -79,7 +106,7 @@ Do not install it for any other device!
   endef
 
   define Package/ipq-wifi-$(1)/install-overlay
-    $$$$(foreach IPQ_WIFI_BOARD_FILE,$$$$(wildcard board-$(1).*),\
+    $$$$(foreach IPQ_WIFI_BOARD_FILE,$$$$(wildcard $(PKG_BUILD_DIR)/board-$(1).*),\
       $$$$(call ipq-wifi-install-one,$$$$(IPQ_WIFI_BOARD_FILE),$$(1)))
   endef
 
@@ -87,12 +114,24 @@ Do not install it for any other device!
 endef
 
 # Add board name to ALLWIFIBOARDS
-# Place files in this directory as board-<devicename>.<qca4019|qca9888|qca9984>
+# Place files in this directory as board-<devicename>.<qca4019|qca9888|qca9889|qca9984|qca99x0|ipq8074>
 # Add $(eval $(call generate-ipq-wifi-package,<devicename>,<display name>))
 
-$(eval $(call generate-ipq-wifi-package,aruba_ap-303,Aruba AP-303))
-$(eval $(call generate-ipq-wifi-package,avm_fritzrepeater-1200,AVM FRITZRepeater 1200))
-$(eval $(call generate-ipq-wifi-package,linksys_ea8300,Linksys EA8300))
-$(eval $(call generate-ipq-wifi-package,qxwlan_e2600ac,Qxwlan E2600AC))
+$(eval $(call generate-ipq-wifi-package,buffalo_wxr-5950ax12,Buffalo WXR-5950AX12))
+$(eval $(call generate-ipq-wifi-package,compex_wpq873,Compex WPQ-873))
+$(eval $(call generate-ipq-wifi-package,dynalink_dl-wrx36,Dynalink DL-WRX36))
+$(eval $(call generate-ipq-wifi-package,edgecore_eap102,Edgecore EAP102))
+$(eval $(call generate-ipq-wifi-package,edimax_cax1800,Edimax CAX1800))
+$(eval $(call generate-ipq-wifi-package,netgear_rax120v2,Netgear RAX120v2))
+$(eval $(call generate-ipq-wifi-package,netgear_wax218,Netgear WAX218))
+$(eval $(call generate-ipq-wifi-package,qnap_301w,QNAP 301w))
+$(eval $(call generate-ipq-wifi-package,prpl_haze,prpl Haze))
+$(eval $(call generate-ipq-wifi-package,redmi_ax6,Redmi AX6))
+$(eval $(call generate-ipq-wifi-package,wallys_dr40x9,Wallys DR40X9))
+$(eval $(call generate-ipq-wifi-package,xiaomi_ax3600,Xiaomi AX3600))
+$(eval $(call generate-ipq-wifi-package,xiaomi_ax9000,Xiaomi AX9000))
+$(eval $(call generate-ipq-wifi-package,zte_mf289f,ZTE MF289F))
+$(eval $(call generate-ipq-wifi-package,zte_mf287plus,ZTE MF287Plus))
+$(eval $(call generate-ipq-wifi-package,zyxel_nbg7815,Zyxel NBG7815))
 
 $(foreach PACKAGE,$(ALLWIFIPACKAGES),$(eval $(call BuildPackage,$(PACKAGE))))