ath79: add missing clock name strings in SoC dtsi

[openwrt/openwrt.git] / target / linux / ath79 / dts / ar9341_tplink.dtsi

diff --git a/target/linux/ath79/dts/ar9341_tplink.dtsi b/target/linux/ath79/dts/ar9341_tplink.dtsi
index 0a950bd1a639e3ac5c46dca84825ad2af54802fa..9c505f2785c5e256cb6c262b2c4a59063325b4bd 100644 (file)
--- a/target/linux/ath79/dts/ar9341_tplink.dtsi
+++ b/target/linux/ath79/dts/ar9341_tplink.dtsi
@@ -1,76 +1,60 @@
 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 
+#include "ar9341.dtsi"
+
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 
-#include "ar9341.dtsi"
-
 / {
        aliases {
-               serial0 = &uart;
                led-boot = &led_power;
                led-failsafe = &led_power;
                led-running = &led_power;
                led-upgrade = &led_power;
-               label-mac-device = &wmac;
-       };
-
-       keys: keys {
-               compatible = "gpio-keys";
-
-               pinctrl-names = "default";
-               pinctrl-0 = <&jtag_disable_pins>;
-
-               rfkill {
-                       label = "WiFi";
-                       linux,code = <KEY_RFKILL>;
-                       gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
-                       debounce-interval = <60>;
-               };
        };
 
        leds: leds {
                compatible = "gpio-leds";
 
                led_power: power {
-                       label = "tp-link:green:power";
+                       label = "green:power";
                        gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
                        default-state = "on";
                };
 
                wlan {
-                       label = "tp-link:green:wlan";
+                       label = "green:wlan";
                        gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
                        linux,default-trigger = "phy0tpt";
                };
 
                qss {
-                       label = "tp-link:green:qss";
+                       label = "green:qss";
                        gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
                };
 
                wan {
-                       label = "tp-link:green:wan";
+                       label = "green:wan";
                        gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
                };
 
                lan1 {
-                       label = "tp-link:green:lan1";
+                       label = "green:lan1";
                        gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
                };
 
                lan2 {
-                       label = "tp-link:green:lan2";
+                       label = "green:lan2";
                        gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
                };
 
                lan3 {
-                       label = "tp-link:green:lan3";
+                       label = "green:lan3";
                        gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
                };
 
                lan4 {
-                       label = "tp-link:green:lan4";
+                       label = "green:lan4";
                        gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
                };
        };
@@ -80,26 +64,24 @@
        clock-frequency = <25000000>;
 };
 
-&uart {
-       status = "okay";
+&gpio {
+       pinctrl-names = "default";
+       pinctrl-0 = <&jtag_disable_pins &pmx_usb_power>;
 };
 
-&gpio {
-       status = "okay";
+&pinmux {
+       pmx_usb_power: usb_power {
+               pinctrl-single,bits = <0x4 0x0 0xff>;
+       };
 };
 
 &eth0 {
        status = "okay";
 
        phy-handle = <&swphy0>;
-
-       mtd-mac-address = <&uboot 0x1fc00>;
-       mtd-mac-address-increment = <(-1)>;
 };
 
 &eth1 {
-       mtd-mac-address = <&uboot 0x1fc00>;
-
        gmac-config {
                device = <&gmac>;
                switch-phy-swap = <1>;
@@ -108,7 +90,4 @@
 
 &wmac {
        status = "okay";
-
-       mtd-cal-data = <&art 0x1000>;
-       mtd-mac-address = <&uboot 0x1fc00>;
 };