ath79: enable factory.bin and adjust profile of ECB1750

[openwrt/openwrt.git] / target / linux / ath79 / generic / base-files / etc / hotplug.d / firmware / 10-ath9k-eeprom

diff --git a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
index 3871825682f596baa0b157e24d020299c2843b95..ebad4e72cd27811c30301fa4255547da3a4087d8 100644 (file)
--- a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
+++ b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
@@ -9,8 +9,7 @@ board=$(board_name)
 case "$FIRMWARE" in
 "ath9k-eeprom-ahb-18100000.wmac.bin")
        case $board in
-       8dev,lima|\
-       ubnt,unifi)
+       8dev,lima)
                caldata_extract "art" 0x1000 0x800
                ;;
        avm,fritz1750e|\
@@ -38,9 +37,10 @@ case "$FIRMWARE" in
                caldata_extract "art" 0x1000 0x440
                ath9k_patch_mac $(mtd_get_mac_ascii devdata "wlan24mac")
                ;;
+       engenius,ecb1200|\
        engenius,ecb1750)
                caldata_extract "art" 0x1000 0x440
-               ath9k_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env "athaddr") +1)
+               ath9k_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env athaddr) +1)
                ;;
        engenius,epg5000|\
        iodata,wn-ac1167dgr|\
@@ -78,7 +78,8 @@ case "$FIRMWARE" in
        engenius,enh202-v1)
                caldata_extract "art" 0x1000 0xeb8
                ;;
-       buffalo,wzr-hp-g450h)
+       buffalo,wzr-hp-g450h|\
+       ubnt,unifi)
                caldata_extract "art" 0x1000 0x440
                ;;
        dlink,dir-825-c1|\
@@ -90,6 +91,7 @@ case "$FIRMWARE" in
                caldata_extract "calibrate" 0x5000 0x440
                ath9k_patch_mac $(mtd_get_mac_ascii u-boot-env0 RADIOADDR0)
                ;;
+       mercury,mw4530r-v1|\
        ocedo,raccoon|\
        tplink,tl-wdr3500-v1|\
        tplink,tl-wdr3600-v1|\
@@ -97,6 +99,7 @@ case "$FIRMWARE" in
        tplink,tl-wdr4300-v1-il|\
        tplink,tl-wdr4310-v1|\
        tplink,tl-wdr4900-v2|\
+       ubnt,unifi-ap-pro|\
        winchannel,wb2000)
                caldata_extract "art" 0x5000 0x440
                ;;
@@ -131,6 +134,7 @@ case "$FIRMWARE" in
        ;;
 "ath9k-eeprom-pci-0000:00:11.0.bin")
        case $board in
+       buffalo,wzr-600dhp|\
        buffalo,wzr-hp-ag300h|\
        netgear,wndr3700|\
        netgear,wndr3700-v2|\
@@ -154,6 +158,7 @@ case "$FIRMWARE" in
        ;;
 "ath9k-eeprom-pci-0000:00:12.0.bin")
        case $board in
+       buffalo,wzr-600dhp|\
        buffalo,wzr-hp-ag300h|\
        netgear,wndr3700|\
        netgear,wndr3700-v2|\